Default Mode – The button on the Minimote uses the factory default functions for operation instead of any special functionality related to the below modes. Scene Mode – The button on the Minimote executes a scene from data received for Parameters Numbers 0-239 related to the button being pressed. Add Mode – The button on the Minimote is able to include/add devices into the Z-Wave network. Remove Mode – The button on the Minimote is able to remove devices from the Z-Wave network. Association Mode – The button on the Minimote is able to associate one device to another. Learn Mode – The button on the Minimote is able to allow the Minimote to be included into other Z-Wave networks and to learn Z-Wave network information. Enable selective Group Mode or Scene Mode when Button is in Use. NOTE: Minimote firmware 1.17 or higher is required, firmware 1.19 is highly recommended.