Which value of the Sensor Binary Report will be sent when the magnet switch to open/close. Which value of the Basic Set will be sent when the magnet switch to open/close. Enable/disable the function of low battery checking, when the current voltage is less than the warning voltage, it will send the Battery Low Warning Report. This parameter is available when the low battery checking function is activated or the device was waked up by other actions (i.e. the z-wave button trigger, magnet switch trigger and the Wake Up Interval Set timeout trigger). The Recessed Door Sensor will check the battery power when it was wake up as other ways. For example: the z-wave button trigger, magnet switch trigger and the Wake Up Interval Set timeout trigger. Default setting: 86640 To set which command will be sent to the associated nodes when the magnet switch is triggered. Bitsets: 4 -> Sensor Binary 8 -> Basic Set Default setting: 0x100 (Basic Set) OZW Ideal Setting: 0x10 (Sensor Binary Report) Lock/ unlock all configuration parameters Device Tag Reset to factory defaults.