Activate/Deactive ALL ON/OFF. Default setting: 255 Auto off relay after specified time, with the possibility of manual override - immediate Off after button push. Default setting: 0 Manual override disabled Automatic turning off relay 1 after set time. For FW1.0 to FW2.0: [1-255] (10ms - 2,5s) 10ms increments, 0 - Auto off disabled. Default setting: 20 (200ms). For FW2.1+: [1- 65535] (0,1s – 6553,5s) 100ms increments, 0 - Auto off disabled. Default setting: 0 Automatic turning off relay 1 after set time. For FW1.0 to FW2.0: [1-255] (10ms - 2,5s) 10ms increments, 0 - Auto off disabled. Default setting: 20 (200ms). For FW2.1+: [1- 65535] (0,1s – 6553,5s) 100ms increments, 0 - Auto off disabled. Default setting: 0 Correct working parameter No. 6 requires settings parameter No. 15 to 1. This activates functionality double-click - Control Dimmer/Roller Shutter. Default setting: 0 Correct working parameter No. 7 requires settings parameter No. 15 to 1. This activates functionality double-click - Control Dimmer/Roller Shutter. Default setting: 0 In case of bi-stable switches, define their behaviour (toggle or follow). Default setting: 0 Binary inputs type configuration. Default setting: 1 Enable/Disable opoeration of dimmer or roller shutter devices associated to group 1. Available only when using mono-stable inputs (buttons) - Hold button 1 or double-tap for operation (only mono-stable input (button)). Default setting: 0 Saving state before power faillure. Default setting: 1 Default setting: 3 Default setting: 2 Default setting: 3 Default setting: 1 Amount of time (ms) the device keeps on flashing after receipt of Alarm Frame. Default setting: 600 Default setting: 3 Default setting: 2 Default setting: 3 Default setting: 1