How many pulses are counted per 10 kWh. Defines the type of sensor. Additional time for feedback measurement.Should always be 0. Adjusts transmit signal so received signal will in average be equal to this values. Auto calibration might select another value than this. Wake device up this many times per second. This value also controls number of measurements per second on mechanical meters. Do not use. Set this value using WAKE_UP_INTERVAL_SET instead. Current pulse count in device (pulse count / pulse factor = kWh). How many 'ticks' before going back to sleep in normal wakeup mode. Set this to enter real-time mode from remote. Contains seconds * poll frequency before going back to sleep. If you press the button once this value will be set.