0=The motor goes clockwise when unlatched; 1= The motor goes counterclockwise when unlatched 1=Slowest ... 5=Fastest, accepts values between 1 and 5 0=Stepper motor mode wave drive (Power Saving); 1=Stepper motor mode full drive(Normal) Factor 10 turn degree( 1 = degrees, 9 = 90 degres, etc. ) How many seconds from the lock has been unlatched to it automatically close again. If 0 then it's disabled Enable or Disable the beep sound from latch or unlatch operations( 0 = Disable, 1 = Enable ) Set the type of battery that powers the device. This affect the returned battery state. 0 = 3.6V, 1=3.0V When the battery level is equal to, or under this value, the device will notify with a beep sound after latch or unlatch