Enable or disable the beeper. Prevents all user codes from unlocking the deadbolt. Enable for extra security while you are away for an extended period of time. When enabled: Press the Outside Schlage Button to lock the deadbolt. (Default setting). When disabled: Press the Outside Schlage Button and then enter a user code to lock the deadbolt. The alarm is turned off by default. After installation, you’ll need to turn on your alarm. Activity Alarms when the door opens or closes. Perfect for monitoring doors while you’re at home. After the alarm is triggered, there is a built-in 3-second delay for it to reset. Sounds two short beeps. Tamper Alarms when the lock is disturbed, while locked. Senses subtle activity at the lock. Sounds 15 second Alarm (90 dB) Forced Entry Alarms when significant force pushes against the door, while locked. Perfect for nighttime or when you’re away from home. • Least sensitive mode Sounds three-minute shrill, steady alarm (90 dB) Each alarm mode is preset to a sensitivity level of three. If your alarm is sounding too frequently, or not frequently enough, try changing this setting. If you change the alarm mode, the sensitivity will revert back to the default setting. Each alarm mode is preset to a sensitivity level of three. If your alarm is sounding too frequently, or not frequently enough, try changing this setting. If you change the alarm mode, the sensitivity will revert back to the default setting. Each alarm mode is preset to a sensitivity level of three. If your alarm is sounding too frequently, or not frequently enough, try changing this setting. If you change the alarm mode, the sensitivity will revert back to the default setting. Enables/Disables local alarm on/off, mode change, sensitivity changes Each failed electronic attempt increments this count by one. When enabled, the lock will automatically relock 30 seconds after unlocking. (Disabled by default.) User Code PIN length, a value between 4 and 8. IMPORTANT: All user codes must be the same length. A subset of Electronic transition count, the number of transitions with high preload. The version of the bootloader