Device status when the external switch receives 1 click Device status when the external switch receives 2 clicks Device status when the external switch receives 3 clicks Device status when the external switch is held down Action on the associated devices when the external switch receives 1 click" Action on the associated devices when the external switch receives 2 clicks Action on the associated devices when the external switch receives 3 clicks Action on the associated devices when the external switch is held down Action performed on all network devices when the external switch receives 1 click Action performed on all network devices when the external switch receives 2 clicks Action performed on all network devices when the external switch receives 3 clicks Action performed on all network devices when the external switch is held down Device status upon receipt of a Basic Set ON_LEVEL value used for devices belonging to Group 2 (1 Click association group). Set value from 0 to 255 (Default: 255) OFF_LEVEL value used for devices belonging to Group 2 (1 Click association group). Set value from 0 to 255 (Default: 0) ON_LEVEL value used for devices belonging to Group 3 (2 Click association group). Set value from 0 to 255 (Default: 255) OFF_LEVEL value used for devices belonging to Group 3 (2 Click association group). Set value from 0 to 255 (Default: 0) ON_LEVEL value used for devices belonging to Group 4 (3 Click association group). Set value from 0 to 255 (Default: 255) OFF_LEVEL value used for devices belonging to Group 4 (3 Click association group). Set value from 0 to 255 (Default: 0) ON_LEVEL value used for devices belonging to Group 5 (Hold association group). Set value from 0 to 255 (Default: 255) OFF_LEVEL value used for devices belonging to Group 5 (Hold association group). Set value from 0 to 255 (Default: 0) Timer associated with the 1 click event on the external switch Timer associated with the 2 click event on the external switch Timer associated with the 3 click event on the external switch Timer associated with the hold event on the external switch Timer associated with the reception of a Basic Set command Time in seconds (1 3600). Default: 600 (10 minutes) Switch-off timer validity Smoke Alarm, CO, CO2 Action Heat Allarm Water Allarm Home Security ON time during flashing. Set value from 0 to 255 (Default: 5) OFF time during flashing. Set value from 0 to 255 (Default: 5) Duration of flashing phase. Set value from 0 to 255 (Default: 10) Startup Status Configuration Reset Type of external switch Sensitivity. Set value from 0 to 255 (Default: 9) Load protection. Time in seconds (3600). Default: 0 Learn Mode