[ 0.000000] [0: swapper: 0] Booting Linux on physical CPU 0x0 [ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu [ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpuacct [ 0.000000] [0: swapper: 0] Linux version 3.10.49-10283451 (dpi@SWHE8817) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Tue Jan 3 01:46:46 KST 2017 [ 0.000000] [0: swapper: 0] CPU: ARMv7 Processor [410fd030] revision 0 (ARMv7), cr=10c0387d [ 0.000000] [0: swapper: 0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] [0: swapper: 0] Machine: Qualcomm Technologies, Inc. MSM 8916 (Flattened Device Tree), model: Samsung J5 EUR PROJECT Rev05 [ 0.000000] [0: swapper: 0] setup_bootmode: boot_mode is 0 [ 0.000000] [0: swapper: 0] val = 49 [ 0.000000] [0: swapper: 0] cma: Found external_image__region@0, memory base 0x85500000, size 19 MiB, limit 0xffffffff [ 0.000000] [0: swapper: 0] cma: Found modem_adsp_region@0, memory base 0x86800000, size 88 MiB, limit 0xffffffff [ 0.000000] [0: swapper: 0] cma: Found pheripheral_region@0, memory base 0x8c000000, size 6 MiB, limit 0xffffffff [ 0.000000] [0: swapper: 0] cma: Found venus_region@0, memory base 0x8c600000, size 5 MiB, limit 0xffffffff [ 0.000000] [0: swapper: 0] cma: Found secure_region@0, memory base 0x00000000, size 109 MiB, limit 0xffffffff [ 0.000000] [0: swapper: 0] cma: Found qseecom_region@0, memory base 0x00000000, size 13 MiB, limit 0xffffffff [ 0.000000] [0: swapper: 0] cma: Found audio_region@0, memory base 0x00000000, size 3 MiB, limit 0xffffffff [ 0.000000] [0: swapper: 0] cma: Found splash_region@8E000000, memory base 0x8e000000, size 20 MiB, limit 0xffffffff [ 0.000000] [0: swapper: 0] cma: CMA: reserved 19 MiB at 0x85500000 for external_image_mem [ 0.000000] [0: swapper: 0] cma: CMA: reserved 88 MiB at 0x86800000 for modem_adsp_mem [ 0.000000] [0: swapper: 0] cma: CMA: reserved 6 MiB at 0x8c000000 for peripheral_mem [ 0.000000] [0: swapper: 0] cma: CMA: reserved 5 MiB at 0x8c600000 for venus_mem [ 0.000000] [0: swapper: 0] cma: CMA: reserved 112 MiB at 0xe9000000 for secure_mem [ 0.000000] [0: swapper: 0] cma: CMA: reserved 16 MiB at 0xe8000000 for qseecom_mem [ 0.000000] [0: swapper: 0] cma: CMA: reserved 4 MiB at 0xe7c00000 for audio_mem [ 0.000000] [0: swapper: 0] cma: CMA: reserved 20 MiB at 0x8e000000 for cont_splash_mem [ 0.000000] [0: swapper: 0] cma: CMA: reserved 8 MiB at 0xa9400000 for default region [ 0.000000] [0: swapper: 0] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] [0: swapper: 0] On node 0 totalpages: 363008 [ 0.000000] [0: swapper: 0] free_area_init_node: node 0, pgdat c12de300, node_mem_map c220a000 [ 0.000000] [0: swapper: 0] Normal zone: 1536 pages used for memmap [ 0.000000] [0: swapper: 0] Normal zone: 0 pages reserved [ 0.000000] [0: swapper: 0] Normal zone: 166400 pages, LIFO batch:31 [ 0.000000] [0: swapper: 0] HighMem zone: 2048 pages used for memmap [ 0.000000] [0: swapper: 0] HighMem zone: 196608 pages, LIFO batch:31 [ 0.000000] [0: swapper: 0] PERCPU: Embedded 14 pages/cpu @c3055000 s33280 r8192 d15872 u57344 [ 0.000000] [0: swapper: 0] pcpu-alloc: s33280 r8192 d15872 u57344 alloc=14*4096 [ 0.000000] [0: swapper: 0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] [0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 361472 [ 0.000000] [0: swapper: 0] Kernel command line: sched_enable_hmp=1 console=null androidboot.hardware=qcom user_debug=23 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci androidboot.sec_atd.tty=/dev/ttyHSL0 loglevel=4 sec_log=0x100000@0xafe00008 sec_dbg=0x80000@0xaff00008 androidboot.revision=5 androidboot.warranty_bit=0 androidboot.bootloader=J500MUBU1BQA1 lpm_levels.sleep_disabled=1 fg_reset=0 androidboot.boot_recovery=0 sec_debug.reset_reason=0x7 androidboot.debug_level=0x4f4c sec_debug.enable=0 sec_debug.enable_user=0 androidboot.cp_debug_level=0x55FF sec_debug.enable_cp_debug=0 vmalloc=340M cordon=e0208730f73cc32b8fee13dc275be318 connie=SM-J500M_OPEN_LTN_19607a962b2ac46d3421c068dc274f09 androidboot.security_mode=1526595584 androidboot.emmc=true androidboot.serialno=02316111 androidboot.baseband=msm lcd_id=0x400003 mdss_mdp.panel=1:dsi:0:ss_dsi_panel_S6E8AA5X01_AMS497HY01_720p:1:none [ 0.000000] [0: swapper: 0] sec_dbg_setup: str=@0xaff00008 [ 0.000000] [0: swapper: 0] sec_dbg_setup: secdbg_paddr = 0xaff00008 [ 0.000000] [0: swapper: 0] sec_dbg_setup: secdbg_size = 0x80000 [ 0.000000] [0: swapper: 0] sec_bat_get_fg_reset, fg_reset:0 [ 0.000000] [0: swapper: 0] get_lcd_attached: LCD_ID = 0x400003 [ 0.000000] [0: swapper: 0] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] [0: swapper: 0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] [0: swapper: 0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] [0: swapper: 0] Memory: 1248288K/1452032K available (10541K kernel code, 1082K rwdata, 4848K rodata, 1088K init, 6273K bss, 203744K reserved, 651264K highmem) [ 0.000000] [0: swapper: 0] Virtual kernel memory layout: [ 0.000000] [0: swapper: 0] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] [0: swapper: 0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] [0: swapper: 0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] [0: swapper: 0] lowmem : 0xccb00000 - 0xf0000000 ( 565 MB) [ 0.000000] [0: swapper: 0] vmalloc : 0xc5500000 - 0xccb00000 ( 118 MB) [ 0.000000] [0: swapper: 0] lowmem : 0xc0000000 - 0xc5500000 ( 85 MB) [ 0.000000] [0: swapper: 0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] [0: swapper: 0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] [0: swapper: 0] .text : 0xc0008000 - 0xc1007414 (16382 kB) [ 0.000000] [0: swapper: 0] .init : 0xc1100000 - 0xc1210200 (1089 kB) [ 0.000000] [0: swapper: 0] .data : 0xc1212000 - 0xc1320af8 (1083 kB) [ 0.000000] [0: swapper: 0] .bss : 0xc1320bbc - 0xc1940fe0 (6274 kB) [ 0.000000] [0: swapper: 0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] [0: swapper: 0] HMP scheduling enabled. [ 0.000000] [0: swapper/0: 0] Preemptible hierarchical RCU implementation. [ 0.000000] [0: swapper/0: 0] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] [0: swapper/0: 0] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] [0: swapper/0: 0] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] [0: swapper/0: 0] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns [ 0.000000] [0: swapper/0: 0] Switching to timer-based delay loop [ 0.000000] [0: swapper/0: 0] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696213963ns [ 0.000623] [0: swapper/0: 0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000648] [0: swapper/0: 0] pid_max: default: 32768 minimum: 301 [ 0.000819] [0: swapper/0: 0] Security Framework initialized [ 0.000861] [0: swapper/0: 0] SELinux: Initializing. [ 0.000919] [0: swapper/0: 0] SELinux: Starting in permissive mode [ 0.000982] [0: swapper/0: 0] Mount-cache hash table entries: 512 [ 0.001908] [0: swapper/0: 0] Initializing cgroup subsys debug [ 0.001932] [0: swapper/0: 0] Initializing cgroup subsys freezer [ 0.001977] [0: swapper/0: 0] CPU: Testing write buffer coherency: ok [ 0.002311] [0: swapper/0: 1] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002404] [0: swapper/0: 1] Setting up static identity map for 0xc0a97e00 - 0xc0a97e58 [ 0.003301] [0: swapper/0: 1] ftrace: Allocated trace_printk buffers [ 0.016960] [0: swapper/0: 1] samsung_panel_init : ss_dsi_panel_S6E8AA5X01_AMS497HY01_720p:1:none [ 0.016984] [0: swapper/0: 1] samsung_panel_init : ss_dsi_panel_S6E8AA5X01_AMS497HY01_720p:1:none [ 0.017387] [0: swapper/0: 1] MSM Memory Dump base table set up [ 0.017424] [0: swapper/0: 1] MSM Memory Dump apps data table set up [ 0.017464] [0: swapper/0: 1] Configuring XPU violations to be fatal errors [ 0.019173] [1: swapper/1: 0] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.020478] [2: swapper/2: 0] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.021722] [3: swapper/3: 0] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.021895] [0: swapper/0: 1] Brought up 4 CPUs [ 0.021940] [0: swapper/0: 1] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.021959] [0: swapper/0: 1] CPU: All CPU(s) started in SVC mode. [ 0.037203] [0: swapper/0: 1] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 0 [ 0.037236] [0: swapper/0: 1] ------------[ cut here ]------------ [ 0.037267] [0: swapper/0: 1] WARNING: at /home/dpi/qb5_8814/workspace/J5LTE_LTN_OPEN/android/kernel/fs/proc/generic.c:102 __xlate_proc_name+0xa0/0xb4() [ 0.037287] [0: swapper/0: 1] name 'cpu/vfp_bounce' [ 0.037304] [0: swapper/0: 1] Modules linked in: [ 0.037325] [0: swapper/0: 1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.49-10283451 #1 [ 0.037366] [0: swapper/0: 1] [] (unwind_backtrace+0x0/0x11c) from [] (show_stack+0x10/0x14) [ 0.037400] [0: swapper/0: 1] [] (show_stack+0x10/0x14) from [] (warn_slowpath_common+0x4c/0x6c) [ 0.037432] [0: swapper/0: 1] [] (warn_slowpath_common+0x4c/0x6c) from [] (warn_slowpath_fmt+0x2c/0x3c) [ 0.037464] [0: swapper/0: 1] [] (warn_slowpath_fmt+0x2c/0x3c) from [] (__xlate_proc_name+0xa0/0xb4) [ 0.037494] [0: swapper/0: 1] [] (__xlate_proc_name+0xa0/0xb4) from [] (__proc_create+0x4c/0xdc) [ 0.037523] [0: swapper/0: 1] [] (__proc_create+0x4c/0xdc) from [] (proc_create_data+0x58/0x98) [ 0.037554] [0: swapper/0: 1] [] (proc_create_data+0x58/0x98) from [] (vfp_init+0x16c/0x1d8) [ 0.037585] [0: swapper/0: 1] [] (vfp_init+0x16c/0x1d8) from [] (do_one_initcall+0xb8/0x160) [ 0.037615] [0: swapper/0: 1] [] (do_one_initcall+0xb8/0x160) from [] (kernel_init_freeable+0x10c/0x1d0) [ 0.037649] [0: swapper/0: 1] [] (kernel_init_freeable+0x10c/0x1d0) from [] (kernel_init+0x8/0xe4) [ 0.037681] [0: swapper/0: 1] [] (kernel_init+0x8/0xe4) from [] (ret_from_fork+0x14/0x3c) [ 0.037724] [0: swapper/0: 1] ---[ end trace da227214a82491b7 ]--- [ 0.037743] [0: swapper/0: 1] Failed to create procfs node for VFP bounce reporting [ 0.039737] [0: swapper/0: 1] pinctrl core: initialized pinctrl subsystem [ 0.040092] [0: swapper/0: 1] regulator-dummy: no parameters [ 0.044106] [0: swapper/0: 1] NET: Registered protocol family 16 [ 0.047929] [0: swapper/0: 1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.075627] [0: swapper/0: 1] sec_debug_init: enable=0 [ 0.075650] [0: swapper/0: 1] sec_debug_init:__raw_readl restart_reason=0 [ 0.075669] [0: swapper/0: 1] sec_debug_init: restart_reason : 0xc561465c [ 0.075729] [0: swapper/0: 1] scm_call failed: func id 0x82000109, arginfo: 0x2, args: 0x1, 0x0, 0x0, 0x0, ret: -2, syscall returns: 0xfffffffc, 0x0, 0x0 [ 0.075750] [0: swapper/0: 1] Failed to disable secure wdog debug: -22 [ 0.075973] [0: swapper/0: 1] allocating 262152 bytes at ef380000 (c0000000 physical) for avc log [ 0.075993] [0: swapper/0: 1] sec_avc_log_init: no old log found [ 0.089288] [0: swapper/0: 1] msm_watchdog b017000.qcom,wdt: wdog absent resource not present [ 0.089495] [0: kworker/0:0H: 5] WDOG_V2 handled by TZ: for cpu[0] @0xaf82c000 PA:ef82c000 [ 0.089521] [0: kworker/0:0H: 5] WDOG_V2 handled by TZ: for cpu[1] @0xaf82c800 PA:ef82c800 [ 0.089543] [0: kworker/0:0H: 5] WDOG_V2 handled by TZ: for cpu[2] @0xaf82d000 PA:ef82d000 [ 0.089566] [0: kworker/0:0H: 5] WDOG_V2 handled by TZ: for cpu[3] @0xaf82d800 PA:ef82d800 [ 0.089601] [0: kworker/0:0H: 5] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized [ 0.093323] [0: swapper/0: 1] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000 [ 0.096260] [0: swapper/0: 1] cma: Assigned CMA region at 0 to 1de0000.qcom,venus device [ 0.096646] [0: swapper/0: 1] cma: Assigned CMA region at 0 to 4080000.qcom,mss device [ 0.096952] [0: swapper/0: 1] cma: Assigned CMA region at 0 to a21b000.qcom,pronto device [ 0.097525] [0: swapper/0: 1] ACC: mem_acc_efuse_init: efuse_addr = 0x00058000 (len=0x1000) [ 0.097580] [0: swapper/0: 1] ACC: mem_acc_fuse_is_setting_expected: [row:0] = 0x4826008000d00705 @52:1 == 1 ?: no [ 0.097692] [0: swapper/0: 1] mem_acc_corner: 0 <--> 0 mV [ 0.104045] [0: swapper/0: 1] gpiochip_find_base: found new base at 902 [ 0.104157] [0: swapper/0: 1] gpiochip_add: registered GPIOs 902 to 1023 on device: msm_tlmm_gpio [ 0.106276] [0: swapper/0: 1] msm_smem_probe: smem_ram_base=0xc5e00000 smem_ram_phys=0x86300000 smem_ram_size=0x100000 [ 0.107891] [0: swapper/0: 1] KPI: Bootloader start count = 33347 [ 0.107913] [0: swapper/0: 1] KPI: Bootloader end count = 82027 [ 0.107932] [0: swapper/0: 1] KPI: Bootloader display count = 42864 [ 0.107950] [0: swapper/0: 1] KPI: Bootloader load kernel count = 2428 [ 0.107970] [0: swapper/0: 1] KPI: Kernel MPM timestamp = 98965 [ 0.107988] [0: swapper/0: 1] KPI: Kernel MPM Clock frequency = 32768 [ 0.108018] [0: swapper/0: 1] socinfo_print: v8, id=206, ver=1.0, raw_id=1797, raw_ver=0, hw_plat=8, hw_plat_ver=65536 [ 0.108018] [0: swapper/0: 1] accessory_chip=0, hw_plat_subtype=0, pmic_model=65547, pmic_die_revision=131072 [ 0.108056] [0: swapper/0: 1] soc_revision_populate: soc_revision 1.0 [ 0.108776] [0: kworker/0:1: 30] smd_channel_probe_worker: allocation table not initialized [ 0.108905] [0: kworker/0:1: 30] smd_channel_probe_worker: allocation table not initialized [ 0.114341] [0: swapper/0: 1] msm_mpm_dev_probe(): Cannot get clk resource for XO [ 0.114378] [0: swapper/0: 1] platform 601d0.qcom,mpm: Driver mpm-v2 requests probe deferral [ 0.115561] [0: swapper/0: 1] 8916_s1_corner: 0 <--> 0 mV at 0 mV normal idle [ 0.115956] [0: swapper/0: 1] 8916_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle [ 0.116317] [0: swapper/0: 1] 8916_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle [ 0.116720] [0: swapper/0: 1] 8916_s3: 1200 <--> 1300 mV at 1200 mV normal idle [ 0.117122] [0: swapper/0: 1] 8916_s4: 1800 <--> 2100 mV at 1800 mV normal idle [ 0.117510] [0: swapper/0: 1] 8916_l1: 1225 mV normal idle [ 0.117914] [0: swapper/0: 1] 8916_l2: 1200 mV normal idle [ 0.118301] [0: swapper/0: 1] 8916_l3: 500 <--> 1287 mV at 0 mV normal idle [ 0.118678] [0: swapper/0: 1] 8916_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle [ 0.119066] [0: swapper/0: 1] 8916_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle [ 0.119463] [0: swapper/0: 1] 8916_l4: 2050 mV normal idle [ 0.119879] [0: swapper/0: 1] 8916_l5: 1800 <--> 1850 mV at 1850 mV normal idle [ 0.120279] [0: swapper/0: 1] 8916_l6: 1800 mV normal idle [ 0.120687] [0: swapper/0: 1] 8916_l7: 1800 mV normal idle [ 0.121071] [0: swapper/0: 1] 8916_l7_ao: 1800 mV normal idle [ 0.121453] [0: swapper/0: 1] 8916_l7_so: 1800 mV normal idle [ 0.121871] [0: swapper/0: 1] 8916_l8: 2850 <--> 2900 mV at 2850 mV normal idle [ 0.122279] [0: swapper/0: 1] 8916_l9: 3300 mV normal idle [ 0.122699] [0: swapper/0: 1] 8916_l10: 2700 <--> 2800 mV at 2700 mV normal idle [ 0.123181] [0: swapper/0: 1] 8916_l11: 1800 <--> 2950 mV at 1800 mV normal idle [ 0.123595] [0: swapper/0: 1] 8916_l12: 1800 <--> 2950 mV at 1800 mV normal idle [ 0.124026] [0: swapper/0: 1] 8916_l13: 3075 mV normal idle [ 0.124455] [0: swapper/0: 1] 8916_l14: 1800 <--> 3300 mV at 1800 mV normal idle [ 0.124869] [0: swapper/0: 1] 8916_l15: 1800 <--> 3300 mV at 1800 mV normal idle [ 0.125290] [0: swapper/0: 1] 8916_l16: 1800 <--> 3300 mV at 1800 mV normal idle [ 0.125671] [0: swapper/0: 1] 8916_l17: 3000 mV normal idle [ 0.126060] [0: swapper/0: 1] 8916_l18: 2700 mV normal idle [ 0.126540] [0: swapper/0: 1] 8916_s2: 1050 <--> 1350 mV at 1150 mV [ 0.126662] [0: swapper/0: 1] spm_regulator_probe: name=8916_s2, range=LV, voltage=1150000 uV, mode=PWM, step rate=1200 uV/us [ 0.127235] [0: swapper/0: 1] cpr_efuse_init: apc_corner: efuse_addr = 0x00058000 (len=0x1000) [ 0.127292] [0: swapper/0: 1] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x12123d6a93c, speed_bits = 0 [ 0.127402] [0: swapper/0: 1] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1150000 1300000] uV [ 0.127426] [0: swapper/0: 1] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1150000 1350000] uV [ 0.127448] [0: swapper/0: 1] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1162500] uV [ 0.127648] [0: swapper/0: 1] cpr_init_cpr_efuse: apc_corner: [row:27] = 0xa08cf6033d99146b [ 0.127682] [0: swapper/0: 1] cpr_init_cpr_efuse: apc_corner: CPR disable fuse = 0 [ 0.127708] [0: swapper/0: 1] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 933 [ 0.127732] [0: swapper/0: 1] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 933 [ 0.127756] [0: swapper/0: 1] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1209 [ 0.127826] [0: swapper/0: 1] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.000 [ 0.127848] [0: swapper/0: 1] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.650 [ 0.127875] [0: swapper/0: 1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 933 [ 0.127895] [0: swapper/0: 1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 933 [ 0.127915] [0: swapper/0: 1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 933 [ 0.127935] [0: swapper/0: 1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 933 [ 0.127956] [0: swapper/0: 1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 1085 [ 0.127976] [0: swapper/0: 1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[6] = 1147 [ 0.127996] [0: swapper/0: 1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[7] = 1209 [ 0.128059] [0: swapper/0: 1] cpr_populate_opp_table: apc_corner: adding OPP entry failed - OPP may not be enabled, rc=-22 [ 0.128112] [0: swapper/0: 1] cpr_init_cpr_parameters: apc_corner: up threshold = 0, down threshold = 2 [ 0.128152] [0: swapper/0: 1] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default. [ 0.128176] [0: swapper/0: 1] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us) [ 0.128462] [0: swapper/0: 1] apc_corner: 0 <--> 0 mV [ 0.129252] [0: swapper/0: 1] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2 [ 0.129324] [0: swapper/0: 1] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517 [ 0.129348] [0: swapper/0: 1] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517 [ 0.129382] [0: swapper/0: 1] platform 78b6000.i2c: Driver i2c-msm-v2 requests probe deferral [ 0.129554] [0: swapper/0: 1] i2c-msm-v2 78b5000.i2c: probing driver i2c-msm-v2 [ 0.129616] [0: swapper/0: 1] i2c-msm-v2 78b5000.i2c: error on clk_get(core_clk):-517 [ 0.129639] [0: swapper/0: 1] i2c-msm-v2 78b5000.i2c: error probe() failed with err:-517 [ 0.129670] [0: swapper/0: 1] platform 78b5000.i2c: Driver i2c-msm-v2 requests probe deferral [ 0.129837] [0: swapper/0: 1] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2 [ 0.129896] [0: swapper/0: 1] i2c-msm-v2 78b9000.i2c: error on clk_get(core_clk):-517 [ 0.129920] [0: swapper/0: 1] i2c-msm-v2 78b9000.i2c: error probe() failed with err:-517 [ 0.129950] [0: swapper/0: 1] platform 78b9000.i2c: Driver i2c-msm-v2 requests probe deferral [ 0.132175] [0: swapper/0: 1] msm-thermal qcom,msm-thermal.60: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues [ 0.132208] [0: swapper/0: 1] msm-thermal qcom,msm-thermal.60: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues [ 0.132237] [0: swapper/0: 1] msm-thermal qcom,msm-thermal.60: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues [ 0.132267] [0: swapper/0: 1] msm-thermal qcom,msm-thermal.60: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues [ 0.132298] [0: swapper/0: 1] msm-thermal qcom,msm-thermal.60: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues [ 0.132612] [0: swapper/0: 1] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init. [ 0.133020] [0: swapper/0: 1] msm-thermal qcom,msm-thermal.60: probe_sensor_info:unable to find DT for sensor-information.KTM continues [ 0.133052] [0: swapper/0: 1] msm-thermal qcom,msm-thermal.60: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues [ 0.133872] [1: swapper/0: 1] sps:sps is ready. [ 0.139708] [1: swapper/0: 1] qcom,rpmcc-8916 1800000.qcom,rpmcc: Registered RPM clocks. [ 0.147721] [1: swapper/0: 1] qcom,gcc-8916 1800000.qcom,gcc: Registered GCC clocks [ 0.149735] [1: swapper/0: 1] clock-a7 b011050.qcom,clock-a7: No speed/PVS binning available. Defaulting to 0! [ 0.151520] [1: swapper/0: 1] sec_debug_subsys_init: smem_ram_phys=86300000 SMEM_ID_VENDOR2=136 size=8792 [ 0.151560] [1: swapper/0: 1] sec_debug_subsys_init: krait(86306650) rpm(86306f20) modem(86307798) dsps(86308010) [ 0.151588] [1: swapper/0: 1] **** secdbg_log or secdbg_paddr is not initialized **** [ 0.152349] [0: kworker/u8:1: 36] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2 [ 0.152435] [0: kworker/u8:1: 36] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.152458] [0: kworker/u8:1: 36] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) [ 0.153816] [1: kworker/u8:1: 36] i2c-msm-v2 78b5000.i2c: probing driver i2c-msm-v2 [ 0.153898] [1: kworker/u8:1: 36] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.153921] [1: kworker/u8:1: 36] i2c-msm-v2 78b5000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) [ 0.154420] [1: kworker/u8:1: 36] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2 [ 0.154495] [1: kworker/u8:1: 36] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.154517] [1: kworker/u8:1: 36] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) [ 0.182790] [0: swapper/0: 1] bio: create slab at 0 [ 0.185682] [0: swapper/0: 1] sm5703_mfd_i2c_init : SM5703 init [ 0.185987] [0: swapper/0: 1] SCSI subsystem initialized [ 0.186200] [0: swapper/0: 1] usbcore: registered new interface driver usbfs [ 0.186267] [0: swapper/0: 1] usbcore: registered new interface driver hub [ 0.186391] [0: swapper/0: 1] usbcore: registered new device driver usb [ 0.188485] [1: swapper/0: 1] i2c-gpio i2c.69: using pins 1003 (SDA) and 1004 (SCL) [ 0.189055] [0: swapper/0: 1] i2c-gpio i2c.70: using pins 916 (SDA) and 917 (SCL) [ 0.190022] [1: swapper/0: 1] sm5703_mfd_probe : SM5703 MFD Driver 0.0.1 start probing [ 0.190072] [1: swapper/0: 1] sm5703-mfd 11-0049: sm5703mfd_parse_dt : no assignment of irq_base, use irq_alloc_descs() [ 0.190113] [1: swapper/0: 1] sm5703-mfd:sm5703_mfd_probe pdata->irq_base = -1 [ 0.190465] [1: swapper/0: 1] sm5703-mfd:sm5703_mfd_probe irq_base = 317 [ 0.191619] [1: swapper/0: 1] charger irq1 = 0x8 [ 0.191918] [1: swapper/0: 1] irq2 = 0x0 [ 0.192215] [1: swapper/0: 1] irq3 = 0x0 [ 0.192512] [1: swapper/0: 1] irq4 = 0x0 [ 0.213539] [0: swapper/0: 1] sm5703-regulator USBLDO1 sm5703_regulator_is_enabled ret (1) [ 0.213560] [0: swapper/0: 1] sm5703-regulator USBLDO1 sm5703_usbldo_regulator_set_voltage_selsm5703-regulator USBLDO1 sm5703_regulator_is_enabled ret (1) [ 0.213873] [0: swapper/0: 1] sm5703-regulator Enable regulator USBLDO1 [ 0.213892] [0: swapper/0: 1] sm5703_regulator_enable desc.id = 0 [ 0.214401] [0: swapper/0: 1] sm5703-regulator USBLDO1 sm5703_regulator_enable ret (0) [ 0.214422] [0: swapper/0: 1] USBLDO1: 4800 mV [ 0.214440] [0: swapper/0: 1] sm5703-regulator USBLDO1 sm5703_usbldo_regulator_get_voltage_sel [ 0.214850] [0: swapper/0: 1] sm5703-regulator USBLDO1 sm5703_regulator_is_enabled ret (1)sm5703-regulator USBLDO2 sm5703_regulator_is_enabled ret (0) [ 0.215447] [0: swapper/0: 1] sm5703-regulator USBLDO2 sm5703_usbldo_regulator_set_voltage_selsm5703-regulator USBLDO2 sm5703_regulator_is_enabled ret (0) [ 0.215759] [0: swapper/0: 1] USBLDO2: 4800 mV [ 0.215778] [0: swapper/0: 1] sm5703-regulator USBLDO2 sm5703_usbldo_regulator_get_voltage_sel [ 0.216422] [0: swapper/0: 1] sm5703-regulator CAM_SENSOR_A2.8V sm5703_regulator_is_enabled ret (0)<6>[ 0.216444] [0: swapper/0: 1] sm5703-regulator select = 3, output list count = 8 [ 0.216463] [0: swapper/0: 1] sm5703-regulator Vout = 2800000 [ 0.216973] [0: swapper/0: 1] sm5703-regulator CAM_SENSOR_A2.8V sm5703_regulator_set_voltage_sel ret (0) [ 0.217271] [0: swapper/0: 1] sm5703-regulator CAM_SENSOR_A2.8V sm5703_regulator_is_enabled ret (0)<6>[ 0.217293] [0: swapper/0: 1] CAM_SENSOR_A2.8V: 2800 mV [ 0.218238] [0: swapper/0: 1] VDD_MOTOR: 1500 <--> 3300 mV at 1500 mV [ 0.219165] [0: swapper/0: 1] VDD_TSP_3.0V: 2800 <--> 3300 mV at 1500 mV [ 0.220112] [0: swapper/0: 1] sm5703-regulator CAM_SENSOR_CORE_1.2V sm5703_regulator_is_enabled ret (0) [ 0.220133] [0: swapper/0: 1] sm5703-regulator select = 15, output list count = 32 [ 0.220152] [0: swapper/0: 1] sm5703-regulator Vout = 1500000 [ 0.220660] [0: swapper/0: 1] sm5703-regulator CAM_SENSOR_CORE_1.2V sm5703_regulator_set_voltage_sel ret (0) [ 0.220958] [0: swapper/0: 1] sm5703-regulator CAM_SENSOR_CORE_1.2V sm5703_regulator_is_enabled ret (0)<6>[ 0.220981] [0: swapper/0: 1] CAM_SENSOR_CORE_1.2V: 1500 mV [ 0.221656] [0: swapper/0: 1] sm5703_mfd_probe : SM5703 MFD Driver Fin probe [ 0.221686] [0: swapper/0: 1] i2c-gpio i2c.71: using pins 924 (SDA) and 925 (SCL) [ 0.222827] [0: swapper/0: 1] i2c-gpio i2c.75: using pins 933 (SDA) and 934 (SCL) [ 0.223431] [1: swapper/0: 1] i2c-gpio i2c.79: using pins 1007 (SDA) and 1008 (SCL) [ 0.223604] [1: swapper/0: 1] media: Linux media interface: v0.10 [ 0.223666] [1: swapper/0: 1] Linux video capture interface: v2.00 [ 0.225293] [1: swapper/0: 1] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device [ 0.225361] [1: swapper/0: 1] ION-heap mm: Cannot specify alignment for this type of heap [ 0.225415] [1: swapper/0: 1] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device [ 0.225521] [1: swapper/0: 1] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device [ 0.225625] [1: swapper/0: 1] cma: Assigned CMA region at 0 to 17.qcom,ion-heap device [ 0.225728] [1: swapper/0: 1] cma: Assigned CMA region at 0 to 1a.qcom,ion-heap device [ 0.225868] [1: swapper/0: 1] ION heap system created [ 0.225981] [0: swapper/0: 1] ion_heap_create: Heap type is disabled: 1 [ 0.225998] [0: swapper/0: 1] msm_ion_heap_create: error creating heap kmalloc type 1 base 0x00000000 size 0 [ 0.226015] [0: swapper/0: 1] ION heap mm created at 0xe9000000 with size 6d00000 [ 0.226036] [0: swapper/0: 1] ION heap qsecom created at 0xe8000000 with size d00000 [ 0.226056] [0: swapper/0: 1] ION heap audio created at 0xe7c00000 with size 314000 [ 0.226085] [0: swapper/0: 1] ION heap pil_1 created at 0x8c000000 with size 600000 [ 0.226104] [0: swapper/0: 1] ION heap pil_2 created at 0x86800000 with size 5800000 [ 0.226225] [0: swapper/0: 1] msm_bus_fabric_init_driver [ 0.226387] [0: swapper/0: 1] msm_bus_device 580000.ad-hoc-bus: Dev 1024 [ 0.226410] [0: swapper/0: 1] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100 [ 0.226426] [0: swapper/0: 1] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100 [ 0.226481] [0: swapper/0: 1] msm_bus_device 580000.ad-hoc-bus: Dev 0 [ 0.226501] [0: swapper/0: 1] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100 [ 0.226517] [0: swapper/0: 1] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100 [ 0.226564] [0: swapper/0: 1] msm_bus_device 580000.ad-hoc-bus: Dev 4096 [ 0.226585] [0: swapper/0: 1] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100 [ 0.226600] [0: swapper/0: 1] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100 [ 0.228088] [0: swapper/0: 1] msm_bus_init_clk: Valid node clk node 1024 ctx 0 [ 0.228100] [0: swapper/0: 1] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid node clk node 0 ctx 0 [ 0.228169] [0: swapper/0: 1] msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0 [ 0.228230] [0: swapper/0: 1] msm_bus_init_clk: Valid node clk node 4096 ctx 1<6>[ 0.233519] [0: swapper/0: 1] gdsc_venus: no parameters [ 0.233698] [0: swapper/0: 1] gdsc_mdss: no parameters [ 0.233871] [0: swapper/0: 1] gdsc_jpeg: no parameters [ 0.234027] [0: swapper/0: 1] gdsc_vfe: no parameters [ 0.234223] [0: swapper/0: 1] gdsc_oxili_gx: no parameters [ 0.234802] [0: swapper/0: 1] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL [ 0.235386] [0: swapper/0: 1] dsi_pll_clock_register_lpm: Registered DSI PLL clocks successfully [ 0.236297] [0: swapper/0: 1] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at c56c0000, with 2 ctx banks [ 0.236830] [0: swapper/0: 1] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at c5f80000, with 20 ctx banks [ 0.240659] [0: swapper/0: 1] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1 [ 0.240771] [0: swapper/0: 1] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2 [ 0.240869] [0: swapper/0: 1] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2 [ 0.240956] [0: swapper/0: 1] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3 [ 0.241041] [0: swapper/0: 1] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4 [ 0.241127] [0: swapper/0: 1] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5 [ 0.241210] [0: swapper/0: 1] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6 [ 0.241298] [0: swapper/0: 1] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7 [ 0.241384] [0: swapper/0: 1] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8 [ 0.241471] [0: swapper/0: 1] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9 [ 0.241557] [0: swapper/0: 1] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18 [ 0.241642] [0: swapper/0: 1] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19 [ 0.241728] [0: swapper/0: 1] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20 [ 0.241813] [0: swapper/0: 1] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21 [ 0.241898] [0: swapper/0: 1] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22 [ 0.241991] [0: swapper/0: 1] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23 [ 0.242077] [0: swapper/0: 1] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24 [ 0.242165] [0: swapper/0: 1] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25 [ 0.242251] [0: swapper/0: 1] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26 [ 0.242336] [0: swapper/0: 1] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27 [ 0.242421] [0: swapper/0: 1] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28 [ 0.242506] [0: swapper/0: 1] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29 [ 0.243105] [0: swapper/0: 1] sm5703_charger_init [ 0.243553] [0: swapper/0: 1] sm5703_charger_probe:[BATT] SM5703 Charger driver probe..0x0 [ 0.243791] [0: swapper/0: 1] sm5703_charger_parse_dt : cannot get chg vbuslimit [ 0.243807] [0: swapper/0: 1] sm5703_charger_parse_dt full_check_type: 2 [ 0.243822] [0: swapper/0: 1] sm5703_charger_parse_dt full_check_type_2nd: 0 [ 0.243835] [0: swapper/0: 1] sm5703_charger_parse_dt error reading battery,full_check_type_2nd -22 [ 0.243997] [0: swapper/0: 1] sm5703_charger_parse_dt: SM5703_parse_dt chgen: 1010 [ 0.244013] [0: swapper/0: 1] sm5703-charger sm5703-charger: sm5703 charger parse dt retval = 0 [ 0.244027] [0: swapper/0: 1] sm5703_enable_autostop:[BATT] Autostop set(0) [ 0.244493] [0: swapper/0: 1] sm5703_enable_autoset:[BATT] Autoset set(1) [ 0.244950] [0: swapper/0: 1] sm5703_enable_aiclen:[BATT] AICLEN set(1) [ 0.246104] [0: swapper/0: 1] sm5703_set_aiclth : SM5703_CHGCNTL5 (AICHTH) : 0xfa [ 0.246814] [0: swapper/0: 1] sm5703_set_freqsel : SM5703_CHGCNTL6 (FREQSEL) : 0x08 [ 0.246828] [0: swapper/0: 1] __sm5703_set_termination_current_limit : Set Termination [ 0.247539] [0: swapper/0: 1] __sm5703_set_termination_current_limit : SM5703_CHGCNTL4 (Top-off current threshold) : 0x44 [ 0.247995] [0: swapper/0: 1] TOPOFF_TMR set (timer=3) [ 0.248706] [0: swapper/0: 1] sm5703_set_regulation_voltage : SM5703_CHGCNTL3 (Battery regulation voltage) : 0x17 [ 0.249418] [0: swapper/0: 1] sm5703_set_otgcurrent : SM5703_OTGCURRENTCNTL (OTG current) : 0x03 [ 0.250128] [0: swapper/0: 1] sm5703_set_bst_iq3limit : SM5703_Q3LIMITCNTL (BST_IQ3LIMIT) : 0x80 [ 0.255047] [0: swapper/0: 1] sm5703_test_read: 0x4 = 0xbf, 0x5 = 0xef, 0x6 = 0xf3, 0x7 = 0xff, 0x8 = 0x08, 0x9 = 0x08, 0xa = 0x03, 0xb = 0x00, 0xc = 0x55, 0xd = 0x08, 0xe = 0x03, 0xf = 0x11, 0x10 = 0x17, 0x11 = 0x44, 0x12 = 0xfa, 0x13 = 0x08, 0x60 = 0x03, 0x6b = 0x20, 0x66 = 0x80, [ 0.255413] [0: swapper/0: 1] sm5703_get_charging_status chg_status3 = 3 [ 0.255681] [0: swapper/0: 1] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 0.255956] [0: swapper/0: 1] sm5703_get_charging_health : charger->is_charging = 0, charger->cable_type = 0, is_current_reduced = 0 [ 0.255969] [0: swapper/0: 1] sm5703_get_charging_health : vbus_status = 32 [ 0.255982] [0: swapper/0: 1] sm5703_get_charging_health : Health : 1 [ 0.256251] [0: swapper/0: 1] sec_chg_get_property: batt_present : 1 [ 0.256519] [0: swapper/0: 1] sec_chg_get_property: Charger Cable type : 0 [ 0.261386] [0: swapper/0: 1] sm5703_test_read: 0x4 = 0xbf, 0x5 = 0xef, 0x6 = 0xf3, 0x7 = 0xff, 0x8 = 0x08, 0x9 = 0x08, 0xa = 0x03, 0xb = 0x00, 0xc = 0x55, 0xd = 0x08, 0xe = 0x03, 0xf = 0x11, 0x10 = 0x17, 0x11 = 0x44, 0x12 = 0xfa, 0x13 = 0x08, 0x60 = 0x03, 0x6b = 0x20, 0x66 = 0x80, [ 0.261923] [0: swapper/0: 1] power_supply sm5703-charger: driver failed to report `input_current_max' property: -22 [ 0.262227] [0: kworker/0:1: 30] sec_chg_get_property: Charger Cable type : 0 [ 0.262506] [0: kworker/0:1: 30] sm5703_get_charging_status chg_status3 = 3 [ 0.262773] [0: kworker/0:1: 30] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 0.263046] [0: kworker/0:1: 30] sm5703_get_charging_health : charger->is_charging = 0, charger->cable_type = 0, is_current_reduced = 0 [ 0.263059] [0: kworker/0:1: 30] sm5703_get_charging_health : vbus_status = 32 [ 0.263072] [0: kworker/0:1: 30] sm5703_get_charging_health : Health : 1 [ 0.263371] [0: kworker/0:1: 30] sec_chg_get_property: batt_present : 1 [ 0.263640] [0: kworker/0:1: 30] sec_chg_get_property: Charger Cable type : 0 [ 0.264910] [1: swapper/0: 1] register_irq : Register IRQ334(done) successfully [ 0.266428] [1: swapper/0: 1] register_irq : Register IRQ333(topoff) successfully [ 0.268201] [1: swapper/0: 1] register_irq : Register IRQ323(otffail) successfully [ 0.269975] [1: swapper/0: 1] register_irq : Register IRQ317(aicl) successfully [ 0.272773] [0: kworker/0:1: 30] sm5703_test_read: 0x4 = 0xbf, 0x5 = 0xef, 0x6 = 0xf3, 0x7 = 0xff, 0x8 = 0x08, 0x9 = 0x08, 0xa = 0x03, 0xb = 0x00, 0xc = 0x55, 0xd = 0x08, 0xe = 0x03, 0xf = 0x11, 0x10 = 0x17, 0x11 = 0x44, 0x12 = 0xfa, 0x13 = 0x08, 0x60 = 0x03, 0x6b = 0x20, 0x66 = 0x80, [ 0.276662] [1: swapper/0: 1] sm5703_test_read: 0x4 = 0xbe, 0x5 = 0xef, 0x6 = 0xf3, 0x7 = 0xff, 0x8 = 0x08, 0x9 = 0x08, 0xa = 0x03, 0xb = 0x00, 0xc = 0x55, 0xd = 0x08, 0xe = 0x03, 0xf = 0x11, 0x10 = 0x17, 0x11 = 0x44, 0x12 = 0xfa, 0x13 = 0x08, 0x60 = 0x03, 0x6b = 0x20, 0x66 = 0x80, [ 0.276679] [1: swapper/0: 1] sm5703_charger_probe:[BATT] SM5703 charger driver loaded OK [ 0.276750] [1: swapper/0: 1] [SENSORS CORE] sensors_class_init [ 0.276925] [0: kworker/0:1: 30] power_supply sm5703-charger: driver failed to report `input_current_max' property: -22 [ 0.277002] [1: swapper/0: 1] input: meta_event as /devices/virtual/input/input0 [ 0.277052] [1: swapper/0: 1] Advanced Linux Sound Architecture Driver Initialized. [ 0.277466] [1: swapper/0: 1] Bluetooth: Core ver 2.16 [ 0.277509] [1: swapper/0: 1] NET: Registered protocol family 31 [ 0.277522] [1: swapper/0: 1] Bluetooth: HCI device and connection manager initialized [ 0.277539] [1: swapper/0: 1] Bluetooth: HCI socket layer initialized [ 0.277555] [1: swapper/0: 1] Bluetooth: L2CAP socket layer initialized [ 0.277581] [1: swapper/0: 1] Bluetooth: SCO socket layer initialized [ 0.277801] [1: kworker/1:1: 29] cfg80211: Calling CRDA to update world regulatory domain [ 0.277828] [1: kworker/1:1: 29] cfg80211: World regulatory domain updated: [ 0.277842] [1: kworker/1:1: 29] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.277857] [1: kworker/1:1: 29] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 0.277872] [1: kworker/1:1: 29] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 0.277886] [1: kworker/1:1: 29] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 0.277900] [1: kworker/1:1: 29] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm) [ 0.277914] [1: kworker/1:1: 29] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm) [ 0.277928] [1: kworker/1:1: 29] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 0.279660] [2: swapper/0: 1] Switching to clocksource arch_sys_counter [ 0.300376] [2: swapper/0: 1] NET: Registered protocol family 2 [ 0.300797] [2: swapper/0: 1] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.300909] [2: swapper/0: 1] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.301012] [2: swapper/0: 1] TCP: Hash tables configured (established 8192 bind 8192) [ 0.301062] [2: swapper/0: 1] TCP: reno registered [ 0.301078] [2: swapper/0: 1] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.301112] [2: swapper/0: 1] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.301306] [2: swapper/0: 1] NET: Registered protocol family 1 [ 0.301781] [0: swapper/0: 1] gcc-mdss-8916 qcom,gcc-mdss.31: Registered GCC MDSS clocks. [ 0.302584] [0: swapper/0: 1] Trying to unpack rootfs image as initramfs... [ 0.389791] [0: swapper/0: 1] Freeing initrd memory: 2084K (c2000000 - c2209000) [ 0.393546] [0: swapper/0: 1] hw perfevents: enabled with ARMv8 Cortex-A53 PMU driver, 7 counters available [ 0.394887] [0: swapper/0: 1] audit: initializing netlink socket (enabled) [ 0.577403] [0: swapper/0: 1] bounce pool size: 64 pages [ 0.580226] [0: swapper/0: 1] zpool: loaded [ 0.581326] [0: swapper/0: 1] Registering sdcardfs 3.2.0 [ 0.581774] [0: swapper/0: 1] exFAT: Core Version 1.2.22 [ 0.581789] [0: swapper/0: 1] exFAT: FS Version 1.2.22 [ 0.582259] [0: swapper/0: 1] fuse init (API version 7.23) [ 0.582480] [0: swapper/0: 1] msgmni has been set to 1190 [ 0.582528] [0: swapper/0: 1] SELinux: Registering netfilter hooks [ 0.582833] [0: swapper/0: 1] tima_uevent_init [ 0.582896] [0: swapper/0: 1] TIMA uevent driver (tima_uevent) is initialized. [ 0.582909] [0: swapper/0: 1] iccc_init: [ 0.582930] [0: swapper/0: 1] iccc_init: registered /proc/iccc_ready interface [ 0.583073] [0: swapper/0: 1] key_dump feature not availabledek: initialized [ 0.583091] [0: swapper/0: 1] SDP_MM: entering************************************************ [ 0.583175] [0: swapper/0: 1] SDP_PUB_CRYPTO[1] : pub_crypto_mod_init netlink socket is created successfully! [ 0.583270] [0: swapper/0: 1] SDP_FS_HANDLER[1] : sdp_fs_handler_mod_init netlink socket is created successfully! [ 0.583334] [0: swapper/0: 1] DLP: dlp_ioctl initialized [ 0.585680] [1: swapper/0: 1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.585696] [1: swapper/0: 1] io scheduler noop registered [ 0.585709] [1: swapper/0: 1] io scheduler deadline registered [ 0.585730] [1: swapper/0: 1] io scheduler row registered [ 0.585827] [1: swapper/0: 1] io scheduler cfq registered (default) [ 0.585925] [1: swapper/0: 1] gpiochip_find_base: found new base at 900 [ 0.586000] [1: swapper/0: 1] gpiochip_add: registered GPIOs 900 to 901 on device: pm8916-mpp [ 0.586148] [1: swapper/0: 1] qcom,qpnp-pin qpnp-pin-2: qpnp_pin_probe: gpio_chip registered between 900-901 [ 0.586202] [1: swapper/0: 1] gpiochip_find_base: found new base at 899 [ 0.586270] [1: swapper/0: 1] gpiochip_add: registered GPIOs 899 to 899 on device: pm8916-gpio [ 0.586321] [1: swapper/0: 1] qcom,qpnp-pin qpnp-pin-3: qpnp_pin_probe: gpio_chip registered between 899-899 [ 0.586466] [1: swapper/0: 1] gpiochip_find_base: found new base at 867 [ 0.586537] [1: swapper/0: 1] gpiochip_add: registered GPIOs 867 to 898 on device: smp2p [ 0.586977] [1: swapper/0: 1] gpiochip_find_base: found new base at 835 [ 0.587045] [1: swapper/0: 1] gpiochip_add: registered GPIOs 835 to 866 on device: smp2p [ 0.587079] [1: swapper/0: 1] gpiochip_find_base: found new base at 803 [ 0.587146] [1: swapper/0: 1] gpiochip_add: registered GPIOs 803 to 834 on device: smp2p [ 0.587589] [1: swapper/0: 1] gpiochip_find_base: found new base at 771 [ 0.587660] [1: swapper/0: 1] gpiochip_add: registered GPIOs 771 to 802 on device: smp2p [ 0.587694] [1: swapper/0: 1] gpiochip_find_base: found new base at 739 [ 0.587761] [1: swapper/0: 1] gpiochip_add: registered GPIOs 739 to 770 on device: slave-kernel [ 0.587830] [1: swapper/0: 1] platform qcom,smp2pgpio-ssr-smp2p-1-in.12: Driver smp2pgpio requests probe deferral [ 0.587861] [1: swapper/0: 1] gpiochip_find_base: found new base at 739 [ 0.587928] [1: swapper/0: 1] gpiochip_add: registered GPIOs 739 to 770 on device: master-kernel [ 0.587986] [1: swapper/0: 1] platform qcom,smp2pgpio-ssr-smp2p-1-out.13: Driver smp2pgpio requests probe deferral [ 0.588017] [1: swapper/0: 1] gpiochip_find_base: found new base at 739 [ 0.588083] [1: swapper/0: 1] gpiochip_add: registered GPIOs 739 to 770 on device: smp2p [ 0.588543] [1: swapper/0: 1] gpiochip_find_base: found new base at 707 [ 0.588614] [1: swapper/0: 1] gpiochip_add: registered GPIOs 707 to 738 on device: smp2p [ 0.588648] [1: swapper/0: 1] gpiochip_find_base: found new base at 675 [ 0.588716] [1: swapper/0: 1] gpiochip_add: registered GPIOs 675 to 706 on device: slave-kernel [ 0.588774] [1: swapper/0: 1] platform qcom,smp2pgpio-ssr-smp2p-4-in.18: Driver smp2pgpio requests probe deferral [ 0.588805] [1: swapper/0: 1] gpiochip_find_base: found new base at 675 [ 0.588871] [1: swapper/0: 1] gpiochip_add: registered GPIOs 675 to 706 on device: master-kernel [ 0.588928] [1: swapper/0: 1] platform qcom,smp2pgpio-ssr-smp2p-4-out.19: Driver smp2pgpio requests probe deferral [ 0.589486] [1: swapper/0: 1] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found [ 0.589510] [1: swapper/0: 1] mdss_mdp_probe+0x1f8/0xbc8->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed [ 0.589529] [1: swapper/0: 1] mdss_mdp_parse_dt_hw_settings: MDSS VBIF settings not found [ 0.589565] [1: swapper/0: 1] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-pipe-cursor-off : doesn't exist in device tree [ 0.589615] [1: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:1 ftchid:1 xinid:0 num:0 ndx:0x1 prio:0 [ 0.589637] [1: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:2 ftchid:7 xinid:1 num:3 ndx:0x8 prio:1 [ 0.589652] [1: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:2 ftchid:8 xinid:5 num:4 ndx:0x10 prio:2 [ 0.589674] [1: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:3 ftchid:4 xinid:2 num:6 ndx:0x40 prio:3 [ 0.589703] [1: swapper/0: 1] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read [ 0.589949] [1: swapper/0: 1] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read [ 0.589969] [1: swapper/0: 1] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-cmd : u32 array read [ 0.589995] [1: swapper/0: 1] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-clk-levels : doesn't exist in device tree [ 0.590033] [1: swapper/0: 1] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-ad-off : doesn't exist in device tree [ 0.590257] [1: swapper/0: 1] mdss_mdp_irq_clk_register: unable to get clk: lut_clk [ 0.592135] [1: swapper/0: 1] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0 [ 0.592365] [1: swapper/0: 1] mdss_dsi_panel_init: Panel Name = ss_dsi_panel_S6E8AA5X01_AMS497HY01_720p [ 0.592749] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=qcom,mdss-dsi-on-command [ 0.592779] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command [ 0.592799] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=qcom,mdss-dsi-off-command [ 0.592827] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command [ 0.592876] [1: swapper/0: 1] mdss_dsi_parse_panel_features: ulps feature disabled [ 0.592897] [1: swapper/0: 1] mdss_dsi_parse_panel_features: ulps during suspend feature disabled [ 0.592914] [1: swapper/0: 1] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0 [ 0.592937] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 0.592950] [1: swapper/0: 1] mdss_dsi_parse_panel_features:1421, Disp_en gpio not specified [ 0.592968] [1: swapper/0: 1] mdss_dsi_parse_panel_features: force-clk-lane-hs enabled [ 0.592996] [1: swapper/0: 1] mdss_panel_init [ 0.593098] [1: swapper/0: 1] mdss_panel_attach_set panel_attach_status : 1 [ 0.593120] [1: swapper/0: 1] mdss_samsung_panel_parse_dt: LP11 init disabled [ 0.593137] [1: swapper/0: 1] mdss_samsung_panel_parse_dt: Change ACL by brightness mode enabled [ 0.593161] [1: swapper/0: 1] mdss_samsung_panel_parse_dt: ESC CLK 128M disabled [ 0.593182] [1: swapper/0: 1] mdss_samsung_panel_parse_dt: alpm enable disabled [ 0.593198] [1: swapper/0: 1] mdss_samsung_panel_parse_dt: hall_ic disabled [ 0.593215] [1: swapper/0: 1] mdss_samsung_panel_parse_dt: OSC TE fitting disabled [ 0.593231] [1: swapper/0: 1] mdss_samsung_panel_parse_dt: hmt disabled [ 0.593252] [1: swapper/0: 1] mdss_samsung_panel_parse_dt: tft_common_support disabled [ 0.593276] [1: swapper/0: 1] mdss_samsung_panel_parse_dt: backlight_gpio_config disabled [ 0.593293] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 0.593307] [1: swapper/0: 1] mdss_samsung_panel_parse_dt:3081, panel_extra_power gpio1 not specified [ 0.593324] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 0.593337] [1: swapper/0: 1] mdss_samsung_panel_parse_dt:3081, panel_extra_power gpio2 not specified [ 0.593354] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 0.593367] [1: swapper/0: 1] mdss_samsung_panel_parse_dt:3081, panel_extra_power gpio3 not specified [ 0.593385] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 0.593398] [1: swapper/0: 1] mdss_samsung_panel_parse_dt:3081, panel_extra_power gpio4 not specified [ 0.593415] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 0.593428] [1: swapper/0: 1] mdss_samsung_panel_parse_dt:3094, backlight_tft_gpio gpio1 not specified [ 0.593445] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 0.593459] [1: swapper/0: 1] mdss_samsung_panel_parse_dt:3094, backlight_tft_gpio gpio2 not specified [ 0.593475] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 0.593489] [1: swapper/0: 1] mdss_samsung_panel_parse_dt:3094, backlight_tft_gpio gpio3 not specified [ 0.593506] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 0.593519] [1: swapper/0: 1] mdss_samsung_panel_parse_dt:3094, backlight_tft_gpio gpio4 not specified [ 0.593548] [1: swapper/0: 1] mdss_samsung_panel_parse_dt_cmds DSI0 [ 0.593563] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,display_on_tx_cmds_revA [ 0.593585] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,level1_key_enable_tx_cmds_revA [ 0.593602] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,level1_key_disable_tx_cmds_revA [ 0.593624] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,level2_key_enable_tx_cmds_revA [ 0.593642] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,level2_key_disable_tx_cmds_revA [ 0.593658] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,smart_dimming_mtp_rx_cmds_revA [ 0.593679] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,manufacture_id0_rx_cmds_revA [ 0.593696] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,manufacture_id1_rx_cmds_revA [ 0.593712] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,manufacture_id2_rx_cmds_revA [ 0.593730] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,manufacture_date_rx_cmds_revA [ 0.593746] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,ddi_id_rx_cmds_revA [ 0.593771] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,mtp_read_sysfs_rx_cmds_revA [ 0.593799] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,acl_off_tx_cmds_revA [ 0.593822] [1: swapper/0: 1] mdss_samsung_parse_candella_lux_mapping_table:Success to read table samsung,candela_map_table_revA [ 0.593848] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,acl_on_tx_cmds_revA [ 0.593865] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,gamma_tx_cmds_revA [ 0.593881] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,elvss_rx_cmds_revA [ 0.593903] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,elvss_tx_cmds_revA [ 0.593923] [1: swapper/0: 1] mdss_samsung_parse_panel_table:Success to read table samsung,aid_map_table_revA [ 0.593942] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,aid_tx_cmds_revA [ 0.593960] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,hbm_rx_cmds_revA [ 0.593977] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,hbm2_rx_cmds_revA [ 0.593994] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,hbm_gamma_tx_cmds_revA [ 0.594011] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,hbm_etc_tx_cmds_revA [ 0.594029] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,hbm_off_tx_cmds_revA [ 0.594045] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,mdnie_read_rx_cmds_revA [ 0.594077] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,elvss_lowtemp_tx_cmds_revA [ 0.594095] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,elvss_lowtemp2_tx_cmds_revA [ 0.594119] [1: swapper/0: 1] mdss_samsung_parse_panel_table:Success to read table samsung,smart_acl_elvss_map_table_revA [ 0.594237] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,packet_size_tx_cmds_revA [ 0.594254] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,reg_read_pos_tx_cmds_revA [ 0.594798] [1: swapper/0: 1] mdss_samsung_parse_panel_table:Success to read table samsung,aid_map_table_revC [ 0.594818] [1: swapper/0: 1] mdss_dsi_parse_dcs_cmds: success, key=samsung,aid_tx_cmds_revC [ 0.600988] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 0.601020] [1: swapper/0: 1] mdss_dsi_panel_init: Continuous splash enabled [ 0.601248] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 0.601263] [1: swapper/0: 1] dsi_panel_device_register:2006, Disp_en gpio not specified [ 0.601278] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 0.601290] [1: swapper/0: 1] dsi_panel_device_register:2014, TE gpio not specified [ 0.601304] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 0.601317] [1: swapper/0: 1] dsi_panel_device_register:2021, lcd_select_gpio not specified [ 0.601332] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 0.601344] [1: swapper/0: 1] dsi_panel_device_register: bklt_en gpio not specified [ 0.601382] [1: swapper/0: 1] mdss_dsi_clk_init: Unable to get lvds_clk clk. [ 0.601475] [1: swapper/0: 1] mdss_dsi_pll_1_clk_init: can't find vco_clk. rc=-517 [ 0.601487] [1: swapper/0: 1] PLL 1 Clock's did not register [ 0.601520] [1: swapper/0: 1] mdss_dsi_retrieve_ctrl_resources: ctrl_base=c5696000 ctrl_size=25c phy_base=c56b2500 phy_size=2b0 [ 0.601537] [1: swapper/0: 1] dsi_panel_device_register: Using default BTA for ESD check [ 0.602811] [1: swapper/0: 1] mdss_samsung_panel_extra_power: ++ enable(1) ndx(0) [ 0.602826] [1: swapper/0: 1] mdss_samsung_panel_extra_power: -- [ 0.602859] [1: swapper/0: 1] mdss_dsi_panel_reset: enable = 1 [ 0.603041] [1: swapper/0: 1] mdss_register_panel: adding framebuffer device 1a98000.qcom,mdss_dsi [ 0.603264] [1: swapper/0: 1] mdss_hw_rev_init: MDP Rev=10060000 [ 0.604048] [1: swapper/0: 1] mdss_dsi_status_init: DSI status check interval:5000 [ 0.604402] [1: swapper/0: 1] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.23 [ 0.605359] [1: swapper/0: 1] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully! [ 0.605404] [1: swapper/0: 1] mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add event timer [ 0.605707] [1: swapper/0: 1] mdss_samsung_create_sysfs: done!! [ 0.605721] [1: swapper/0: 1] mdss_samsung_dsi_panel_registered DSI0 success [ 0.605744] [1: swapper/0: 1] mdss_mdp_splash_parse_dt: memaddr=8e000000 size=1400000 [ 0.605864] [1: swapper/0: 1] mdss_fb_register: FrameBuffer[1] 1280x720 registered successfully! [ 0.605906] [1: swapper/0: 1] mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add event timer [ 0.605951] [1: swapper/0: 1] mdss_mdp_splash_parse_dt: splash mem child node is not present [ 0.607904] [1: swapper/0: 1] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR [ 0.609060] [1: swapper/0: 1] msm_rpm_log_probe: OK [ 0.610617] [1: kworker/1:1: 29] NET: Registered protocol family 27 [ 0.610990] [1: swapper/0: 1] In memshare_probe, Memshare probe success [ 0.612520] [1: swapper/0: 1] of_get_named_gpio_flags exited with status -517 [ 0.612539] [1: swapper/0: 1] subsys-pil-tz a21b000.qcom,pronto: [wcnss]: Error getting proxy unvoting gpio [ 0.612596] [1: swapper/0: 1] platform a21b000.qcom,pronto: Driver subsys-pil-tz requests probe deferral [ 0.613890] [1: swapper/0: 1] of_get_named_gpio_flags exited with status -517 [ 0.613907] [1: swapper/0: 1] pil-q6v5-mss 4080000.qcom,mss: [modem]: Error getting proxy unvoting gpio [ 0.614015] [1: swapper/0: 1] platform 4080000.qcom,mss: Driver pil-q6v5-mss requests probe deferral [ 0.614543] [1: swapper/0: 1] sec-thermistor sec_thermistor.73: sec_therm_probe: SEC Thermistor Driver Loading [ 0.614579] [1: swapper/0: 1] sec_therm_probe:ret=-517 [ 0.614598] [1: swapper/0: 1] platform sec_thermistor.73: Driver sec-thermistor requests probe deferral [ 0.614663] [1: swapper/0: 1] sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading [ 0.614677] [1: swapper/0: 1] sec_therm_probe:ret=-19 [ 0.614689] [1: swapper/0: 1] vadc property missing [ 0.614701] [1: swapper/0: 1] ap_thm invalid channel num, using default value [ 0.636486] [1: swapper/0: 1] msm_serial_hsl_probe: detected port #0 (ttyHSL0) [ 0.636534] [1: swapper/0: 1] AXI: get_pdata(): Error: Client name not found [ 0.636549] [1: swapper/0: 1] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration [ 0.636563] [1: swapper/0: 1] msm_serial_hsl_probe: Bus scaling is disabled [ 0.636637] [1: swapper/0: 1] 78b0000.serial: ttyHSL0 at MMIO 0x78b0000 (irq = 140) is a MSM [ 0.637062] [1: swapper/0: 1] msm_serial_hsl_init: driver initialized [ 0.646333] [1: swapper/0: 1] kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on [ 0.652398] [1: swapper/0: 1] brd: module loaded [ 0.654657] [1: swapper/0: 1] loop: module loaded [ 0.655009] [1: swapper/0: 1] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x800000 [ 0.655041] [1: swapper/0: 1] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2 [ 0.655054] [1: swapper/0: 1] QSEECOM: qseecom_probe: Device does not support PFEQSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0 [ 0.655078] [1: swapper/0: 1] QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x0<6>[ 0.655092] [1: swapper/0: 1] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem [ 0.655106] [1: swapper/0: 1] QSEECOM: qseecom_probe: CE operating frequency is not defined, setting to default 100MHZ [ 0.655231] [1: swapper/0: 1] QSEECOM: qseecom_probe: secure app region addr=0x85500000 size=0x800000 [ 0.656592] [1: swapper/0: 1] init tzic<6>[ 0.658540] [1: swapper/0: 1] dmverity_odin_flag_read_init:: Registering /proc/dmverity_odin_flag Interface [ 0.658560] [1: swapper/0: 1] tima_debug_log_read_init: Registering /proc/tima_debug_log Interface [ 0.658655] [1: swapper/0: 1] i2c-core: driver [tabla-i2c-core] using legacy suspend method [ 0.658668] [1: swapper/0: 1] i2c-core: driver [tabla-i2c-core] using legacy resume method [ 0.658766] [1: swapper/0: 1] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method [ 0.658780] [1: swapper/0: 1] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method [ 0.658879] [1: swapper/0: 1] i2c-core: driver [tasha-i2c-core] using legacy suspend method [ 0.658892] [1: swapper/0: 1] i2c-core: driver [tasha-i2c-core] using legacy resume method [ 0.659413] [1: swapper/0: 1] SCSI Media Changer driver v0.25 [ 0.660384] [1: swapper/0: 1] tun: Universal TUN/TAP device driver, 1.6 [ 0.660399] [1: swapper/0: 1] tun: (C) 1999-2004 Max Krasnyansky [ 0.662521] [1: swapper/0: 1] PPP generic driver version 2.4.2 [ 0.662607] [1: swapper/0: 1] PPP BSD Compression module registered [ 0.662620] [1: swapper/0: 1] PPP Deflate Compression module registered [ 0.662641] [1: swapper/0: 1] PPP MPPE Compression module registered [ 0.662655] [1: swapper/0: 1] NET: Registered protocol family 24 [ 0.663185] [1: swapper/0: 1] wcnss_wlan probed in built-in mode [ 0.663797] [1: swapper/0: 1] usbcore: registered new interface driver asix [ 0.663864] [1: swapper/0: 1] usbcore: registered new interface driver ax88179_178a [ 0.663904] [1: swapper/0: 1] usbcore: registered new interface driver cdc_ether [ 0.663955] [1: swapper/0: 1] usbcore: registered new interface driver smsc75xx [ 0.663995] [1: swapper/0: 1] usbcore: registered new interface driver smsc9500 [ 0.664084] [1: swapper/0: 1] usbcore: registered new interface driver net1080 [ 0.664123] [1: swapper/0: 1] usbcore: registered new interface driver cdc_subset [ 0.664160] [1: swapper/0: 1] usbcore: registered new interface driver zaurus [ 0.664468] [1: swapper/0: 1] usbcore: registered new interface driver cdc_ncm [ 0.664886] [1: kworker/1:1: 29] msm_sharedmem: sharedmem_register_qmi: qmi init successful [ 0.665144] [1: swapper/0: 1] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs' [ 0.665253] [1: swapper/0: 1] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp' [ 0.665368] [1: swapper/0: 1] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm' [ 0.665463] [1: swapper/0: 1] msm_sharedmem: msm_sharedmem_probe: qcom,client-id property not found [ 0.665555] [1: swapper/0: 1] msm_sharedmem: msm_sharedmem_probe: Device created for client 'bimc' [ 0.665903] [1: swapper/0: 1] msm_otg 78d9000.usb: msm_otg probe [ 0.666218] [1: swapper/0: 1] msm_otg_dt_to_pdata : init_seq =19,b,ffffffff , otg_mode=3 , otg_control=2 [ 0.666252] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 0.666267] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 0.666282] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 0.666304] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 0.668378] [1: swapper/0: 1] msm_otg 78d9000.usb: OTG regs = c56f0000 [ 0.669951] [1: swapper/0: 1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.669966] [1: swapper/0: 1] ehci-msm: Qualcomm On-Chip EHCI Host Controller [ 0.670227] [1: swapper/0: 1] ehci-msm2: Qualcomm EHCI Host Controller [ 0.671020] [1: swapper/0: 1] usbcore: registered new interface driver cdc_acm [ 0.671034] [1: swapper/0: 1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.671091] [1: swapper/0: 1] usbcore: registered new interface driver ccid_bridge [ 0.671193] [1: swapper/0: 1] ccid_bridge_init: success [ 0.671248] [1: swapper/0: 1] usbcore: registered new interface driver usb-storage [ 0.671287] [1: swapper/0: 1] usbcore: registered new interface driver ums-alauda [ 0.671324] [1: swapper/0: 1] usbcore: registered new interface driver ums-cypress [ 0.671359] [1: swapper/0: 1] usbcore: registered new interface driver ums-datafab [ 0.671397] [1: swapper/0: 1] usbcore: registered new interface driver ums-freecom [ 0.671432] [1: swapper/0: 1] usbcore: registered new interface driver ums-isd200 [ 0.671468] [1: swapper/0: 1] usbcore: registered new interface driver ums-jumpshot [ 0.671503] [1: swapper/0: 1] usbcore: registered new interface driver ums-karma [ 0.671540] [1: swapper/0: 1] usbcore: registered new interface driver ums-onetouch [ 0.671575] [1: swapper/0: 1] usbcore: registered new interface driver ums-sddr09 [ 0.671611] [1: swapper/0: 1] usbcore: registered new interface driver ums-sddr55 [ 0.671647] [1: swapper/0: 1] usbcore: registered new interface driver ums-usbat [ 0.671740] [1: swapper/0: 1] usbcore: registered new interface driver usbserial [ 0.671781] [1: swapper/0: 1] usbcore: registered new interface driver qc_csvt [ 0.671815] [1: swapper/0: 1] usbserial: USB Serial support registered for qc_csvt [ 0.671852] [1: swapper/0: 1] usbcore: registered new interface driver pl2303 [ 0.671884] [1: swapper/0: 1] usbserial: USB Serial support registered for pl2303 [ 0.671926] [1: swapper/0: 1] usbcore: registered new interface driver usb_ehset_test [ 0.673587] [0: swapper/0: 1] usb_notify: ovc_init [ 0.673711] [0: swapper/0: 1] mousedev: PS/2 mouse device common for all mice [ 0.673751] [2: kworker/u8:3: 44] msm_otg 78d9000.usb: phy_reset: success [ 0.674370] [0: swapper/0: 1] tc300k_probe start [ 0.674454] [0: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 0.674469] [0: swapper/0: 1] tc300k_parse_dt() coreriver,fw-name: tc360_j5 [ 0.674484] [0: swapper/0: 1] [tc300k_parse_dt]: Unable to read vcc_en_ldo_name rc = -22 [ 0.674498] [0: swapper/0: 1] [tc300k_parse_dt]: Unable to read vdd_led_ldo_name rc = -22 [ 0.674512] [0: swapper/0: 1] tc300k_parse_dt: gpio_en = 1022, tkey_scl= 1004, tkey_sda= 1003, tkey_int= 1000, firmup= 1 [ 0.674530] [0: swapper/0: 1] sec_touchkey 7-0020: tc300k_gpio_request: enter [ 0.674727] [0: swapper/0: 1] sec_touchkey 7-0020: tkey_pinctrl_configure: SUSPEND [ 0.674759] [0: swapper/0: 1] sec_touchkey 7-0020: tc300k_power: power on [ 0.674774] [0: swapper/0: 1] tc300k_powerTKEY_EN 3.3V on is finished. [ 0.689759] [0: swapper/0: 1] sec_touchkey 7-0020: tkey_pinctrl_configure: ACTIVE [ 0.999889] [0: swapper/0: 1] input: sec_touchkey as /devices/soc.0/i2c.69/i2c-7/7-0020/input/input1 [ 1.000301] [1: swapper/0: 1] coreriver/tc360_j5.fw!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! [ 1.000320] [1: swapper/0: 1] sec_touchkey 7-0020: BIN: fw 0x6 is loaded (size=7072) [ 1.000657] [1: swapper/0: 1] sec_touchkey 7-0020: IC fw_ver(6) [ 1.000985] [1: swapper/0: 1] sec_touchkey 7-0020: IC fw_ver(0x6), module_ver(0x1) [ 1.001000] [1: swapper/0: 1] sec_touchkey 7-0020: IC aleady have latest firmware (0x6) [ 1.001016] [1: swapper/0: 1] sec_touchkey 7-0020: success to flash fw (1) [ 1.001031] [1: swapper/0: 1] sec_touchkey 7-0020: successfully probed. [ 1.001082] [1: swapper/0: 1] tc300k_init: init done 0 [ 1.001305] [1: swapper/0: 1] usbcore: registered new interface driver xpad [ 1.001320] [1: swapper/0: 1] [ TSP ] ist30xx_init() [ 1.001513] [1: swapper/0: 1] [ TSP ] ### IMAGIS probe(ver:2.0.0.0, protocol:B, addr:0x50) ### [ 1.001552] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 1.001567] [1: swapper/0: 1] [ TSP ] ist30xx_parse_dt() bring up: 0 [ 1.001582] [1: swapper/0: 1] [ TSP ] ist30xx_parse_dt() tkey: 1 [ 1.001595] [1: swapper/0: 1] [ TSP ] ist30xx_parse_dt() octa-hw: 1 [ 1.001610] [1: swapper/0: 1] [ TSP ] ist30xx_parse_dt() ic_version: ist3038c [ 1.001624] [1: swapper/0: 1] [ TSP ] ist30xx_parse_dt() project_name: j5_octa [ 1.001639] [1: swapper/0: 1] [ TSP ] ist30xx_parse_dt() firm path: tsp_imagis/ist3038c_j5_octa.fw [ 1.001653] [1: swapper/0: 1] [ TSP ] ist30xx_parse_dt() cmcs bin path: tsp_imagis/ist3038c_j5_octa_cmcs.bin [ 1.001668] [1: swapper/0: 1] [ TSP ] ist30xx_parse_dt() irq:915, touch_en:-2, tsp_ldo: VDD_TSP_3.0V [ 1.001681] [1: swapper/0: 1] [ TSP ] ist30xx_request_gpio [ 1.001811] [1: swapper/0: 1] [ TSP ] ist30xx_pinctrl_configure: ACTIVE [ 1.001833] [1: swapper/0: 1] [ TSP ] client->irq : 315 [ 1.001849] [1: swapper/0: 1] [ TSP ] ist30xx_power_on() [ 1.001863] [1: swapper/0: 1] [ TSP ] ts_power_enable on [ 1.001904] [1: swapper/0: 1] 8916_l6: Failed to create debugfs directory [ 1.001928] [1: swapper/0: 1] VDD_TSP_3.0V: Failed to create debugfs directory [ 1.002335] [1: swapper/0: 1] sm5703-regulator VDD_TSP_3.0V sm5703_regulator_is_enabled ret (0) [ 1.002348] [1: swapper/0: 1] sm5703-regulator select = 4, output list count = 8 [ 1.002360] [1: swapper/0: 1] sm5703-regulator Vout = 3000000 [ 1.003053] [1: swapper/0: 1] sm5703-regulator VDD_TSP_3.0V sm5703_regulator_set_voltage_sel ret (0) [ 1.003451] [1: swapper/0: 1] sm5703-regulator VDD_TSP_3.0V sm5703_regulator_is_enabled ret (0)sm5703-regulator VDD_TSP_3.0V sm5703_regulator_is_enabled ret (0) [ 1.003860] [1: swapper/0: 1] sm5703-regulator Enable regulator VDD_TSP_3.0V [ 1.003873] [1: swapper/0: 1] sm5703_regulator_enable desc.id = 4 [ 1.004564] [1: swapper/0: 1] sm5703-regulator VDD_TSP_3.0V sm5703_regulator_enable ret (0) [ 1.004964] [1: swapper/0: 1] sm5703-regulator VDD_TSP_3.0V sm5703_regulator_is_enabled ret (1)[ TSP ] ts_power_enable: 8916_l6: 1 VDD_TSP_3.0V: 1 [ 1.069995] [0: swapper/0: 1] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0x8 (ok) [ 1.119743] [0: swapper/0: 1] [ TSP ] ist30xx_probe: set FW_HOLD [ 1.120272] [1: swapper/0: 1] [ TSP ] TSP IC: 38c [ 1.120293] [1: swapper/0: 1] [ TSP ] IC: 38c, Binary ver main: 2020000, fw: 109, test: 0, core: 1020200 [ 1.121786] [0: swapper/0: 1] [ TSP ] IC version main: 2020000, fw: 109, test: 0, core: 1020200 [ 1.121803] [0: swapper/0: 1] [ TSP ] Version compare IC: 109(2020000), BIN: 109(2020000) [ 1.122408] [0: swapper/0: 1] [ TSP ] ist30xx_probe: ret:0, swap:1 [ 1.122719] [0: swapper/0: 1] [ TSP ] ist30xx_probe: ret:0, xy:50002D0, x:720, y:1280 [ 1.122888] [0: swapper/0: 1] input: sec_touchscreen as /devices/soc.0/78b9000.i2c/i2c-5/5-0050/input/input2 [ 1.122906] [0: swapper/0: 1] [ TSP ] ist30xx_ts_open: IC is already on [ 1.122984] [0: swapper/0: 1] [ TSP ] ist30xx_set_input_device: input register device:0 [ 1.123359] [0: swapper/0: 1] [ TSP ] ist30xx_init_cmcs_jit_sysfs:++ [ 1.123468] [0: swapper/0: 1] [ TSP ] sec_fac_cmd_init: cmd_result lenght is 2880 [ 1.123800] [0: swapper/0: 1] sps: BAM device 0x07884000 is not registered yet. [ 1.123844] [0: swapper/0: 1] sps:BAM 0x07884000 is registered. [ 1.124149] [0: swapper/0: 1] sps:BAM 0x07884000 (va:0xc5c40000) enabled: ver:0x18, number of pipes:16 [ 1.128041] [0: swapper/0: 1] [ TSP ] info read success [ 1.128055] [0: swapper/0: 1] [ TSP ] tsp update info success! [ 1.128363] [0: swapper/0: 1] [ TSP ] calib status: 0x80260cab [ 1.229765] [0: swapper/0: 1] [ TSP ] Get info: success [ 1.229779] [0: swapper/0: 1] [ TSP ] ### IMAGIS probe success ### [ 1.279738] [0: swapper/0: 1] [ TSP ] ist30xx_probe: release FW_HOLD [ 1.280718] [0: swapper/0: 1] input: hbtp_vm as /devices/virtual/input/input3 [ 1.281523] [0: swapper/0: 1] qcom,qpnp-rtc qpnp-rtc-4: rtc core: registered qpnp_rtc as rtc0 [ 1.281720] [0: swapper/0: 1] i2c /dev entries driver [ 1.284012] [0: swapper/0: 1] platform 1d00000.qcom,vidc: Driver msm_vidc_v4l2 requests probe deferral [ 1.284795] [0: swapper/0: 1] cam_dummy_init_module:232 [ 1.284927] [0: swapper/0: 1] cam_dummy_platform_probe:134 [ 1.285316] [0: swapper/0: 1] cam_dummy_init_module:235 rc = 0 [ 1.285812] [0: swapper/0: 1] msm_cci_probe: pdev ef30c000 device id = -1 [ 1.288181] [0: swapper/0: 1] msm_actuator_init_module:1690 msm_actuator_init_module: Enter [ 1.288529] [0: swapper/0: 1] msm_actuator_init_module:1695 msm_actuator_init_module:1695 rc -19 [ 1.288569] [0: swapper/0: 1] msm_actuator_i2c_probe:1211 msm_actuator_i2c_probe: Enter [ 1.288649] [0: swapper/0: 1] msm_actuator_i2c_probe:1294 msm_actuator_i2c_probe: succeeded [ 1.288663] [0: swapper/0: 1] msm_actuator_i2c_probe:1295 msm_actuator_i2c_probe: Exit [ 1.289034] [0: swapper/0: 1] msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger [ 1.289873] [0: swapper/0: 1] msm_flash_lm3642_init entry [ 1.289926] [0: swapper/0: 1] msm_eeprom_init_module E [ 1.290276] [0: swapper/0: 1] msm_eeprom_i2c_probe E [ 1.290292] [0: swapper/0: 1] cell-index/subdev_id 1, rc 0 [ 1.290328] [0: swapper/0: 1] msm_eeprom_get_dt_data: 1108 [ 1.290354] [0: swapper/0: 1] msm_eeprom_i2c_probe: no cal memory map [ 1.290370] [0: swapper/0: 1] msm_camera_pinctrl_init:1443 Getting pinctrl handle failed [ 1.290384] [0: swapper/0: 1] msm_camera_power_up:1488 Initialization of pinctrl failed [ 1.295515] [0: swapper/0: 1] read_eeprom_memory Enter [ 1.295764] [0: swapper/0: 1] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x9 (ok) [ 1.714932] [0: swapper/0: 1] read_eeprom_memory Exit [ 1.719880] [0: swapper/0: 1] msm_eeprom_i2c_probe qcom,sensor-position 0 [ 1.719993] [0: swapper/0: 1] msm_eeprom_i2c_probe success result=0 X [ 1.720073] [0: swapper/0: 1] MSM-SENSOR-INIT msm_sensor_init_module:548 MSM_SENSOR_INIT_MODULE 00000000 [ 1.721675] [0: swapper/0: 1] g_sctrl[0] eef21600 [ 1.722118] [0: swapper/0: 1] g_sctrl[1] eef21800<6>[ 1.737009] [0: swapper/0: 1] MSM-CPP cpp_init_hardware:815 CPP HW Version: 0x40010000 [ 1.737027] [0: swapper/0: 1] MSM-CPP cpp_init_hardware:825 stream_cnt:0 [ 1.740294] [0: swapper/0: 1] __msm_jpeg_init:1236] Jpeg Device id 0 [ 1.741860] [0: swapper/0: 1] unable to find DT imem DLOAD mode node [ 1.742197] [0: swapper/0: 1] unable to find DT imem EDLOAD mode node [ 1.742255] [0: swapper/0: 1] set_dload_mode <1> ( c06c7f90 ) [ 1.761403] [0: swapper/0: 1] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 1.761544] [0: swapper/0: 1] device-mapper: req-crypt: dm-req-crypt successfully initalized. [ 1.761544] [0: swapper/0: 1] [ 1.761741] [0: swapper/0: 1] cpuidle: using governor ladder [ 1.761755] [0: swapper/0: 1] cpuidle: using governor menu [ 1.761788] [0: swapper/0: 1] sdhci: Secure Digital Host Controller Interface driver [ 1.761801] [0: swapper/0: 1] sdhci: Copyright(c) Pierre Ossman [ 1.761813] [0: swapper/0: 1] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.762365] [0: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 1.765539] [0: swapper/0: 1] sdhci_msm 7824900.sdhci: host_use_default_qos = 1 [ 1.765556] [0: swapper/0: 1] sdhci_msm 7824900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 1, qos type = 2 [ 1.765572] [0: swapper/0: 1] sdhci_msm 7824900.sdhci: dma_latency = 200 [ 1.765588] [0: swapper/0: 1] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2 [ 1.765603] [0: swapper/0: 1] sdhci_msm 7824900.sdhci: dma_latency = 200 [ 1.765619] [0: swapper/0: 1] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2 [ 1.765634] [0: swapper/0: 1] sdhci_msm 7824900.sdhci: dma_latency = 200 [ 1.765648] [0: swapper/0: 1] sdhci_msm 7824900.sdhci: Host using default pm_qos [ 1.766220] [1: swapper/0: 1] mmc0: no vqmmc regulator found [ 1.766238] [1: swapper/0: 1] mmc0: no vmmc regulator found [ 1.766266] [1: swapper/0: 1] mmc0: before SDHCI_RESET_ALL, PWRCTL_REG = 0x0 [ 1.794706] [0: swapper/0: 1] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA [ 1.801744] [0: swapper/0: 1] sdhci_msm 7864900.sdhci: host_use_default_qos = 1 [ 1.801762] [0: swapper/0: 1] sdhci_msm 7864900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 1, qos type = 2 [ 1.801778] [0: swapper/0: 1] sdhci_msm 7864900.sdhci: dma_latency = 200 [ 1.801794] [0: swapper/0: 1] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2 [ 1.801809] [0: swapper/0: 1] sdhci_msm 7864900.sdhci: dma_latency = 200 [ 1.801955] [0: swapper/0: 1] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2 [ 1.801971] [0: swapper/0: 1] sdhci_msm 7864900.sdhci: dma_latency = 200 [ 1.801985] [0: swapper/0: 1] sdhci_msm 7864900.sdhci: Host using default pm_qos [ 1.803400] [0: kworker/u8:3: 44] mmc0: CMD41: -110: 00000000 00000000 00000000 00000000 [ 1.812340] [0: swapper/0: 1] sdhci_msm_probe : Change sysfs Card Detect [ 1.812844] [0: swapper/0: 1] mmc1: no vqmmc regulator found [ 1.812862] [0: swapper/0: 1] mmc1: no vmmc regulator found [ 1.812889] [0: swapper/0: 1] mmc1: before SDHCI_RESET_ALL, PWRCTL_REG = 0x0 [ 1.831392] [0: kworker/u8:3: 44] mmc0: BKOPS_EN bit = 0 [ 1.843217] [0: swapper/0: 1] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA [ 1.843600] [0: swapper/0: 1] qcom,leds-qpnp: probe of leds-qpnp-8 failed with error -10 [ 1.844913] [0: swapper/0: 1] sm5703-fled:sm5703_fled_probe() line-935: Siliconmitus SM5703 FlashLED driver probing... [ 1.844929] [0: swapper/0: 1] sm5703-fled:sm5703_fled_probe() line-938: Siliconmitus SM5703 FlashLED driver probing...2 [ 1.844944] [0: swapper/0: 1] sm5703-fled:sm5703_fled_probe() line-940: Siliconmitus SM5703 FlashLED driver probing...3 [ 1.844965] [0: swapper/0: 1] sm5703-fled:sm5703_fled_probe() line-947: Siliconmitus SM5703 FlashLED driver probing...4 [ 1.844983] [0: swapper/0: 1] sm5703-fled sm5703-fled: flash_current = <1200> [ 1.844998] [0: swapper/0: 1] sm5703-fled sm5703-fled: movie_current = <170> [ 1.845102] [0: swapper/0: 1] sm-flash-led:smfled_probe() line-230: Siliconmitus FlashLED Driver is probing [ 1.847313] [0: swapper/0: 1] sm-flash-led:smfled_probe() line-248: Siliconmitus FlashLED Driver initialized successfully [ 1.847423] [0: swapper/0: 1] sm5703-fled:sm5703_fled_probe() line-994: led1-gpio:938 [ 1.847491] [0: swapper/0: 1] sm5703-fled:sm5703_fled_probe() line-1001: led2-gpio:936 [ 1.847530] [1: kworker/u8:3: 44] mmc0: new HS200 MMC card at address 0001 [ 1.847791] [0: swapper/0: 1] sm5703-fled:sm5703_fled_probe() line-1036: End : X [ 1.847974] [1: kworker/u8:3: 44] [mmc_blk_probe]mmcblk0: mmc0:0001 Q316BB 14.6 GiB , card->type:0 [ 1.848175] [1: kworker/u8:3: 44] mmcblk0rpmb: mmc0:0001 Q316BB partition 3 4.00 MiB [ 1.849550] [0: swapper/0: 1] KTD2692_LED Probe [ 1.851250] [2: kworker/u8:3: 44] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 [ 1.851750] [0: swapper/0: 1] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ [ 1.852131] [0: swapper/0: 1] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000 [ 1.852152] [0: swapper/0: 1] qce 720000.qcedev: CE device = 0x0 [ 1.852152] [0: swapper/0: 1] , IO base, CE = 0xc5dc0000 [ 1.852152] [0: swapper/0: 1] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3 [ 1.852152] [0: swapper/0: 1] IO base BAM = 0x (null) [ 1.852152] [0: swapper/0: 1] BAM IRQ 239 [ 1.852152] [0: swapper/0: 1] Engines Availability = 0x2010853 [ 1.854173] [2: kworker/u8:3: 44] mmc1: sdhci_do_set_ios: HC_VEN_PWR_REG before reset all 0x1 [ 1.854189] [2: kworker/u8:3: 44] mmc1: before SDHCI_RESET_ALL, PWRCTL_REG = 0x1 [ 1.852224] [0: swapper/0: 1] sps:BAM 0x00704000 is registered. [ 1.857373] [0: swapper/0: 1] sps:BAM 0x00704000 (va:0xc5f40000) enabled: ver:0x25, number of pipes:8 [ 1.861976] [0: swapper/0: 1] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239 [ 1.862140] [0: swapper/0: 1] QCE50: qce_disable_clk: QMCK: qce_disable_clk start [ 1.862164] [0: swapper/0: 1] QCE50: qce_disable_clk: QMCK: qce_disable_clk end [ 1.862416] [0: swapper/0: 1] qcedev: FIPS140-2 Known Answer Tests : Skipped [ 1.863008] [0: swapper/0: 1] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ [ 1.863364] [0: swapper/0: 1] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000 [ 1.863385] [0: swapper/0: 1] qcrypto 720000.qcrypto: CE device = 0x0 [ 1.863385] [0: swapper/0: 1] , IO base, CE = 0xc6440000 [ 1.863385] [0: swapper/0: 1] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5 [ 1.863385] [0: swapper/0: 1] IO base BAM = 0x (null) [ 1.863385] [0: swapper/0: 1] BAM IRQ 239 [ 1.863385] [0: swapper/0: 1] Engines Availability = 0x2010853 [ 1.872306] [0: swapper/0: 1] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239 [ 1.872469] [0: swapper/0: 1] QCE50: qce_disable_clk: QMCK: qce_disable_clk start [ 1.872490] [0: swapper/0: 1] QCE50: qce_disable_clk: QMCK: qce_disable_clk end [ 1.872907] [1: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-ecb-aes [ 1.873063] [1: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-cbc-aes [ 1.873195] [0: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-ctr-aes [ 1.873318] [1: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-ecb-des [ 1.873444] [1: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-cbc-des [ 1.873565] [0: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-ecb-3des [ 1.873676] [1: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-cbc-3des [ 1.873795] [0: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-xts-aes [ 1.873921] [0: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-sha1 [ 1.874047] [0: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-sha256 [ 1.874172] [0: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes [ 1.874282] [1: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des [ 1.874400] [0: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des [ 1.874524] [0: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes [ 1.874634] [1: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des [ 1.874753] [0: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des [ 1.874879] [0: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-hmac-sha1 [ 1.875006] [0: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-hmac-sha256 [ 1.875115] [1: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-aes-ccm [ 1.875238] [0: swapper/0: 1] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm [ 1.875252] [0: swapper/0: 1] qcrypto: FIPS140-2 Known Answer Tests: Skipped [ 1.875606] [0: swapper/0: 1] hidraw: raw HID events driver (C) Jiri Kosina [ 1.877151] [0: swapper/0: 1] Successfully registered hid_synaptics_driver [ 1.877209] [0: swapper/0: 1] usbcore: registered new interface driver usbhid [ 1.877222] [0: swapper/0: 1] usbhid: USB HID core driver [ 1.877516] [0: swapper/0: 1] zram: Created 1 device(s) ... [ 1.877785] [0: swapper/0: 1] ashmem: initialized [ 1.877847] [0: swapper/0: 1] logger: created 1024K log 'log_main' [ 1.877904] [0: swapper/0: 1] logger: created 512K log 'log_events' [ 1.877961] [0: swapper/0: 1] logger: created 2048K log 'log_radio' [ 1.878017] [0: swapper/0: 1] logger: created 512K log 'log_system' [ 1.878033] [0: swapper/0: 1] sec_getlog_supply_loggerinfo: 0xc14fb5c8 0xc15fb5c8 0xc17fb5c8 0xc187b5c8 [ 1.878950] [0: swapper/0: 1] sps:BAM 0x078c4000 is registered. [ 1.879338] [0: swapper/0: 1] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot [ 1.879366] [0: swapper/0: 1] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown) [ 1.879603] [0: swapper/0: 1] input: qpnp_pon as /devices/virtual/input/input4 [ 1.880163] [0: swapper/0: 1] qpnp_pon_input_dispatch: PWR key is released [ 1.880179] [0: swapper/0: 1] sec_debug_check_crash_key code 116 value 0 state 0 enable 0 [ 1.880193] [0: swapper/0: 1] (sec_debug_set_upload_cause) cafebabe [ 1.881061] [0: swapper/0: 1] qpnp_pon_input_dispatch: VOLUME DOWN key is released [ 1.881077] [0: swapper/0: 1] sec_debug_check_crash_key code 114 value 0 state 0 enable 0 [ 1.881866] [0: swapper/0: 1] PMIC@SID0: PM8916 v2.0 options: 0, 2, 0, 0 [ 1.883278] [0: swapper/0: 1] armbw-pm qcom,armbw-pm.32: BW HWmon governor registered. [ 1.884140] [1: swapper/0: 1] devfreq 0.qcom,cpubw: Couldn't update frequency transition information. [ 1.884676] [1: swapper/0: 1] mckernelapi : Mobicore API module initialized! [ 1.884890] [1: swapper/0: 1] MobiCore mcd: MobiCore Driver, Build: Tue Jan 3 01:36:29 2017 [ 1.884906] [1: swapper/0: 1] MobiCore mcd: MobiCore mcDrvModuleApi version is 1.1 [ 1.884919] [1: swapper/0: 1] MobiCore mcd: MobiCore t-base-QC-MSM8916-Android-301C-V001-107_107 [ 1.885307] [1: swapper/0: 1] sm5703_fuelgauge_init [ 1.885586] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_fuelgauge_probe: SM5703 Fuelgauge Driver Loading [ 1.885626] [1: swapper/0: 1] fuelgauge_parse_dt reading fg_irq = 1023 [ 1.885641] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 1.885659] [1: swapper/0: 1] fuelgauge_parse_dt: fg_irq: 1023, calculation_type: 0x17, fuel_alert_soc: 1, [ 1.885659] [1: swapper/0: 1] repeated_fuelalert: 0 [ 1.885685] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703 sec_hal_fg_init... [ 1.885705] [1: swapper/0: 1] sm5703_fg_parse_dt() line-878: battery id = 0 [ 1.885732] [1: swapper/0: 1] sm5703_fg_parse_dt() line-905: battery0,rce_value = <0x749 0x580 0x371> [ 1.885748] [1: swapper/0: 1] sm5703_fg_parse_dt() line-912: battery0,dtcd_value = <0x1> [ 1.885772] [1: swapper/0: 1] sm5703_fg_parse_dt() line-923: battery0,rs_value = <0x1ae 0x47a 0x3800 0xa4> [ 1.885788] [1: swapper/0: 1] sm5703_fg_parse_dt() line-930: battery0,vit_period = <0x3506> [ 1.885807] [1: swapper/0: 1] sm5703_fg_parse_dt() line-941: battery0,mix_value = <0x503 0x4> [ 1.885822] [1: swapper/0: 1] sm5703_fg_parse_dt() line-948: battery0,battery_type = <4350> [ 1.885838] [1: swapper/0: 1] sm5703_fg_parse_dt() line-958: battery0,topoff_soc = <0x0 0x5> [ 1.885854] [1: swapper/0: 1] sm5703_fg_parse_dt() line-965: battery0,volt_cal = <0x8000> [ 1.885870] [1: swapper/0: 1] sm5703_fg_parse_dt() line-971: battery0,curr_cal = <0x7500> [ 1.885885] [1: swapper/0: 1] sm5703_fg_parse_dt() line-978: battery0,temp_std = <25> [ 1.885900] [1: swapper/0: 1] sm5703_fg_parse_dt() line-985: battery0,temp_offset = <10> [ 1.885916] [1: swapper/0: 1] sm5703_fg_parse_dt() line-992: battery0,temp_offset_cal = <0x1> [ 1.885931] [1: swapper/0: 1] sm5703_fg_parse_dt() line-999: battery0,charge_offset_cal = <0xffffffff> [ 1.885948] [1: swapper/0: 1] sm5703_fg_parse_dt() line-1008: battery0,min_charge_curr = <150> [ 1.885966] [1: swapper/0: 1] sm5703_fg_parse_dt() line-1023: battery0,ext_temp_cal = <0, 10, 1, 1, 1, 7, 1, 2> [ 1.885984] [1: swapper/0: 1] sm5703_fg_parse_dt() line-1035: battery0,tem_poff = <3400, 100, 3320, 100> [ 1.886480] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_device_id: device_id = 0xa [ 1.886963] [1: swapper/0: 1] sm5703_fg_init: SM5703_REG_CNTL reg : 0xc421 [ 1.888220] [1: swapper/0: 1] sm5703_get_charging_health : charger->is_charging = 0, charger->cable_type = 0, is_current_reduced = 0 [ 1.888234] [1: swapper/0: 1] sm5703_get_charging_health : vbus_status = 32 [ 1.888247] [1: swapper/0: 1] sm5703_get_charging_health : Health : 1 [ 1.888731] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_vbat: read = 0x3e8, vbat = 3906 [ 1.888746] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_vbat: batt_avgvoltage = 976 [ 1.889700] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_ocv: read = 0x3e7, ocv = 3902 [ 1.890232] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_fg_init: sm5703 FG 0x30 = 0x1e49 [ 1.890716] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_fg_init: sm5703 FG 0x31 = 0x1e4a [ 1.891199] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_fg_init: sm5703 FG 0x32 = 0x1e4a [ 1.891681] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_fg_init: sm5703 FG 0x33 = 0x1e4a [ 1.892164] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_fg_init: sm5703 FG 0x34 = 0x1e4a [ 1.892647] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_fg_init: sm5703 FG 0x35 = 0x1e4b [ 1.893129] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_fg_init: sm5703 FG 0x36 = 0x1e4a [ 1.893610] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_fg_init: sm5703 FG 0x37 = 0x1e4b [ 1.894095] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_fg_init: sm5703 FG 0x40 = 0x1e48 [ 1.894579] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_fg_init: sm5703 FG 0x41 = 0x1e48 [ 1.895062] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_fg_init: sm5703 FG 0x42 = 0x1e48 [ 1.895546] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_fg_init: sm5703 FG 0x43 = 0x1e48 [ 1.895561] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: SM5703 Fuel-Gauge Ver 0.0.0.1 [ 1.895576] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703 hal fg init OK [ 1.895979] [1: swapper/0: 1] sm5703_get_charging_status chg_status3 = 3 [ 1.896378] [1: swapper/0: 1] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 1.896779] [1: swapper/0: 1] sm5703_get_charging_health : charger->is_charging = 0, charger->cable_type = 0, is_current_reduced = 0 [ 1.896793] [1: swapper/0: 1] sm5703_get_charging_health : vbus_status = 32 [ 1.896805] [1: swapper/0: 1] sm5703_get_charging_health : Health : 1 [ 1.896821] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_soc: curr_cal = 0x7500 , ta_exist = 0 [ 1.897306] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: fg_vbatocv_check: iocv_error_count (0) [ 1.897322] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: fg_vbatocv_check: mode change to mix RS auto mode [ 1.898194] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_soc: temp_fg = 323 , batt_temp = 250, volt_cal = 0x8000, curr_cal = 0x7500, high_temp_cal_fact = 0, low_temp_cal_fact = 0 [ 1.899062] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_soc: read = 0x3a34, soc = 582 [ 1.900988] [1: swapper/0: 1] 0xAC=0x1f60, 0xAD=0x20e9, 0xAE=0x225c, 0xAF=0x2399 [ 1.902865] [1: swapper/0: 1] 0xBC=0x1f60, 0xBD=0x20e9, 0xBE=0x225c, 0xBF=0x2399 [ 1.904744] [1: swapper/0: 1] 0xCC=0x0c40, 0xCD=0x10e2, 0xCE=0x1497, 0xCF=0x149c [ 1.906628] [1: swapper/0: 1] 0x85=0x000d, 0x86=0x0080, 0x87=0x17fc, 0x28=0x0c28 [ 1.907146] [1: swapper/0: 1] sm5703_get_charging_status chg_status3 = 3 [ 1.907545] [1: swapper/0: 1] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 1.907950] [1: swapper/0: 1] sm5703_get_charging_status chg_status3 = 3 [ 1.908349] [1: swapper/0: 1] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 1.908835] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_vbat: read = 0x3e8, vbat = 3906 [ 1.908850] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_vbat: batt_avgvoltage = 3906 [ 1.909253] [1: swapper/0: 1] sm5703_get_charging_status chg_status3 = 3 [ 1.909651] [1: swapper/0: 1] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 1.910083] [1: swapper/0: 1] sm5703_get_charging_status chg_status3 = 3 [ 1.910483] [1: swapper/0: 1] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 1.910969] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x800d, curr = -50 [ 1.910984] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = -12 [ 1.911388] [1: swapper/0: 1] sm5703_get_charging_status chg_status3 = 3 [ 1.911787] [1: swapper/0: 1] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 1.912273] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x800d, curr = -50 [ 1.912288] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = -18 [ 1.912691] [1: swapper/0: 1] sm5703_get_charging_status chg_status3 = 3 [ 1.913090] [1: swapper/0: 1] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 1.913107] [1: swapper/0: 1] power_supply sm5703-fuelgauge: driver failed to report `energy_now' property: -22 [ 1.913609] [1: swapper/0: 1] sm5703_get_charging_status chg_status3 = 3 [ 1.914008] [1: swapper/0: 1] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 1.914515] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sec_hal_fg_fuelalert_init: sec_hal_fg_fuelalert_init [ 1.914939] [1: kworker/1:1: 29] sm5703_get_charging_status chg_status3 = 3 [ 1.915338] [1: kworker/1:1: 29] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 1.915743] [1: kworker/1:1: 29] sm5703_get_charging_status chg_status3 = 3 [ 1.916142] [1: kworker/1:1: 29] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 1.917120] [1: kworker/1:1: 29] sm5703-fuelgauge 10-0071: sm5703_get_vbat: read = 0x3e8, vbat = 3906 [ 1.917136] [1: kworker/1:1: 29] sm5703-fuelgauge 10-0071: sm5703_get_vbat: batt_avgvoltage = 3906 [ 1.917540] [1: kworker/1:1: 29] sm5703_get_charging_status chg_status3 = 3 [ 1.917939] [1: kworker/1:1: 29] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 1.918344] [1: kworker/1:1: 29] sm5703_get_charging_status chg_status3 = 3 [ 1.918742] [1: kworker/1:1: 29] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 1.919228] [1: kworker/1:1: 29] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x800d, curr = -50 [ 1.919243] [1: kworker/1:1: 29] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = -21 [ 1.919646] [1: kworker/1:1: 29] sm5703_get_charging_status chg_status3 = 3 [ 1.920075] [1: kworker/1:1: 29] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 1.920719] [1: kworker/1:1: 29] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x800d, curr = -50 [ 1.920735] [1: kworker/1:1: 29] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = -23 [ 1.921140] [1: kworker/1:1: 29] sm5703_get_charging_status chg_status3 = 3 [ 1.921539] [1: kworker/1:1: 29] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 1.921556] [1: kworker/1:1: 29] power_supply sm5703-fuelgauge: driver failed to report `energy_now' property: -22 [ 1.924753] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sec_hal_fg_fuelalert_init: irq_ctrl=0xfffffff1, REG_CNTL=0xc421, V_ALARM=0x2b4, SOC_ALARM=0x100 [ 1.924786] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_fuelgauge_probe: fg_irq = 440 [ 1.925006] [0: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_fuelgauge_probe: SEC Fuelgauge Driver Loaded [ 1.925088] [0: swapper/0: 1] [SENSOR] k2hh_probe: Probe Start! [ 1.925140] [0: swapper/0: 1] [SENSOR] k2hh_regulator_onoff: on [ 1.959782] [1: swapper/0: 1] k2hh_regulator_onoff VIO put [ 1.960727] [1: swapper/0: 1] [SENSOR] k2hh_set_mode: change mode 1 [ 1.961125] [1: swapper/0: 1] [SENSOR] k2hh_probe: chip id success 0x41 [ 1.961252] [1: swapper/0: 1] input: accelerometer_sensor as /devices/virtual/input/input5 [ 1.962158] [1: swapper/0: 1] [SENSOR] k2hh_set_range: 0x20 [ 1.962850] [1: swapper/0: 1] [SENSOR] k2hh_set_mode: change mode 0 [ 1.962863] [1: swapper/0: 1] [SENSOR] k2hh_probe: Probe done! [ 1.963107] [1: swapper/0: 1] gp2a_i2c_probe, start [ 1.963121] [1: swapper/0: 1] gp2a_regulator_onoff on [ 1.989911] [1: swapper/0: 1] input: proximity_sensor as /devices/virtual/input/input6 [ 1.990384] [1: swapper/0: 1] gp2a_setup_irq,request_irq(441) success for gpio 1015 [ 1.990746] [1: swapper/0: 1] gp2a_i2c_probe done [ 1.990785] [1: swapper/0: 1] [VIB] sm5703_vibrator_init [ 1.991118] [1: swapper/0: 1] [VIB] sm5703_vibrator_probe [ 1.991169] [1: swapper/0: 1] sm5703_vibrator_probe: vib_power init.. [ 1.991183] [1: swapper/0: 1] [sm5703_vibrator_probe] ldo_name[VDD_MOTOR] ldo_volt[3300000] [ 1.991588] [1: swapper/0: 1] sm5703-regulator VDD_MOTOR sm5703_regulator_is_enabled ret (0) [ 1.991601] [1: swapper/0: 1] sm5703-regulator select = 5, output list count = 8 [ 1.991614] [1: swapper/0: 1] sm5703-regulator Vout = 3300000 [ 1.992305] [1: swapper/0: 1] sm5703-regulator VDD_MOTOR sm5703_regulator_set_voltage_sel ret (0) [ 1.992702] [1: swapper/0: 1] sm5703-regulator VDD_MOTOR sm5703_regulator_is_enabled ret (0)<6>[ 1.993198] [1: swapper/0: 1] usbcore: registered new interface driver snd-usb-audio [ 1.994239] [1: swapper/0: 1] spmi msm8x16_wcd_codec-10: Driver wcd-spmi-core requests probe deferral [ 1.994273] [1: swapper/0: 1] spmi msm8x16_wcd_codec-11: Driver wcd-spmi-core requests probe deferral [ 2.004237] [1: swapper/0: 1] msm-pcm-lpa qcom,msm-pcm-lpa.41: msm_pcm_probe: dev name qcom,msm-pcm-lpa.41 [ 2.004933] [1: swapper/0: 1] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral [ 2.005290] [1: swapper/0: 1] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral [ 2.009273] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 2.009292] [1: swapper/0: 1] msm8x16-asoc-wcd sound.29: msm8x16_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node [ 2.009308] [1: swapper/0: 1] populate_ext_snd_card_dailinks: CARD is 8x16 wcd internal card [ 2.009328] [1: swapper/0: 1] msm8x16-asoc-wcd sound.29: default codec configured [ 2.009343] [1: swapper/0: 1] msm8x16_asoc_machine_probe: ext_pa = 1 [ 2.009446] [1: swapper/0: 1] get_cdc_gpio_lines [ 2.009513] [1: swapper/0: 1] get_cdc_gpio_lines: no external PA connected 1 [ 2.009530] [1: swapper/0: 1] msm8x16-asoc-wcd sound.29: Headset is using internal micbias [ 2.010490] [1: swapper/0: 1] msm8x16-asoc-wcd sound.29: ASoC: platform (null) not registered [ 2.010530] [1: swapper/0: 1] msm8x16-asoc-wcd sound.29: snd_soc_register_card failed (-517) [ 2.010576] [1: swapper/0: 1] platform sound.29: Driver msm8x16-asoc-wcd requests probe deferral [ 2.010909] [1: swapper/0: 1] Mirror/redirect action on [ 2.010925] [1: swapper/0: 1] u32 classifier [ 2.010936] [1: swapper/0: 1] Actions configured [ 2.010952] [1: swapper/0: 1] Netfilter messages via NETLINK v0.30. [ 2.011029] [1: swapper/0: 1] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 2.011402] [1: swapper/0: 1] ctnetlink v0.93: registering with nfnetlink. [ 2.011468] [1: swapper/0: 1] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 2.011482] [1: swapper/0: 1] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 2.011818] [1: swapper/0: 1] xt_time: kernel timezone is -0000 [ 2.011848] [1: swapper/0: 1] 939-23012-001-quicksec-vpnclient-for-android-3.5-4155-1a877303f36b-4155 [ 2.011860] [1: swapper/0: 1] vpnclient kernel spd loaded. [ 2.012104] [1: swapper/0: 1] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.012248] [1: swapper/0: 1] arp_tables: (C) 2002 David S. Miller [ 2.012291] [1: swapper/0: 1] TCP: bic registered [ 2.012305] [1: swapper/0: 1] TCP: cubic registered [ 2.012318] [1: swapper/0: 1] Initializing XFRM netlink socket [ 2.012626] [1: swapper/0: 1] NET: Registered protocol family 10 [ 2.013260] [1: swapper/0: 1] mip6: Mobile IPv6 [ 2.013294] [1: swapper/0: 1] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.013420] [1: swapper/0: 1] sit: IPv6 over IPv4 tunneling driver [ 2.013815] [1: swapper/0: 1] NET: Registered protocol family 17 [ 2.013844] [1: swapper/0: 1] NET: Registered protocol family 15 [ 2.013917] [1: swapper/0: 1] Bridge firewalling registered [ 2.013934] [1: swapper/0: 1] Ebtables v2.0 registered [ 2.013972] [1: swapper/0: 1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.013993] [1: swapper/0: 1] Bluetooth: HIDP socket layer initialized [ 2.014202] [1: kworker/u8:3: 44] gpiochip_find_base: found new base at 675 [ 2.014289] [1: kworker/u8:3: 44] gpiochip_add: registered GPIOs 675 to 706 on device: slave-kernel [ 2.014584] [1: kworker/u8:3: 44] gpiochip_find_base: found new base at 643 [ 2.014649] [1: kworker/u8:3: 44] gpiochip_add: registered GPIOs 643 to 674 on device: master-kernel [ 2.014737] [1: kworker/u8:3: 44] gpiochip_find_base: found new base at 611 [ 2.014802] [1: kworker/u8:3: 44] gpiochip_add: registered GPIOs 611 to 642 on device: slave-kernel [ 2.015081] [1: kworker/u8:3: 44] gpiochip_find_base: found new base at 579 [ 2.015143] [1: kworker/u8:3: 44] gpiochip_add: registered GPIOs 579 to 610 on device: master-kernel [ 2.017742] [1: kworker/u8:3: 44] sec-thermistor sec_thermistor.73: sec_therm_probe: SEC Thermistor Driver Loading [ 2.017790] [1: kworker/u8:3: 44] ap_thm invalid channel num, using default value [ 2.019202] [0: kworker/u8:3: 44] spmi msm8x16_wcd_codec-10: Driver wcd-spmi-core requests probe deferral [ 2.019248] [0: kworker/u8:3: 44] spmi msm8x16_wcd_codec-11: Driver wcd-spmi-core requests probe deferral [ 2.021104] [0: kworker/u8:3: 44] of_get_named_gpio_flags: can't parse gpios property [ 2.021123] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: msm8x16_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node [ 2.021139] [0: kworker/u8:3: 44] populate_ext_snd_card_dailinks: CARD is 8x16 wcd internal card [ 2.021158] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: default codec configured [ 2.021173] [0: kworker/u8:3: 44] msm8x16_asoc_machine_probe: ext_pa = 1 [ 2.021279] [0: kworker/u8:3: 44] get_cdc_gpio_lines [ 2.021344] [0: kworker/u8:3: 44] get_cdc_gpio_lines: no external PA connected 1 [ 2.021361] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: Headset is using internal micbias [ 2.022393] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: ASoC: CODEC (null) not registered [ 2.022432] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: snd_soc_register_card failed (-517) [ 2.022477] [0: kworker/u8:3: 44] platform sound.29: Driver msm8x16-asoc-wcd requests probe deferral [ 2.022535] [0: kworker/u8:3: 44] spmi msm8x16_wcd_codec-10: Driver wcd-spmi-core requests probe deferral [ 2.022578] [0: kworker/u8:3: 44] spmi msm8x16_wcd_codec-11: Driver wcd-spmi-core requests probe deferral [ 2.024175] [0: swapper/0: 1] Registering SWP/SWPB emulation handler [ 2.024965] [0: swapper/0: 1] zswap: loading zswap [ 2.024979] [0: swapper/0: 1] zpool: creating pool type zsmalloc [ 2.025125] [0: swapper/0: 1] zpool: created zsmalloc pool [ 2.025138] [0: swapper/0: 1] zswap: using zsmalloc pool [ 2.025172] [0: swapper/0: 1] zswap: using lz4 compressor [ 2.135777] [0: swapper/0: 1] sm5703-regulator CAM_SENSOR_CORE_1.2V sm5703_regulator_is_enabled ret (0) [ 2.136183] [0: swapper/0: 1] sm5703-regulator VDD_MOTOR sm5703_regulator_is_enabled ret (0)sm5703-regulator CAM_SENSOR_A2.8V sm5703_regulator_is_enabled ret (0) [ 2.136980] [0: swapper/0: 1] sm5703-regulator USBLDO2 sm5703_regulator_is_enabled ret (0)<6>[ 2.137011] [0: swapper/0: 1] mem_acc_corner: disabling [ 2.137024] [0: swapper/0: 1] regulator-dummy: disabling [ 2.137577] [1: kworker/u8:3: 44] of_get_named_gpio_flags: can't parse gpios property [ 2.137598] [1: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: msm8x16_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node [ 2.137614] [1: kworker/u8:3: 44] populate_ext_snd_card_dailinks: CARD is 8x16 wcd internal card [ 2.137633] [1: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: default codec configured [ 2.137649] [1: kworker/u8:3: 44] msm8x16_asoc_machine_probe: ext_pa = 1 [ 2.137768] [1: kworker/u8:3: 44] get_cdc_gpio_lines [ 2.137833] [1: kworker/u8:3: 44] get_cdc_gpio_lines: no external PA connected 1 [ 2.137851] [1: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: Headset is using internal micbias [ 2.138898] [1: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: ASoC: CODEC (null) not registered [ 2.138936] [1: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: snd_soc_register_card failed (-517) [ 2.138983] [1: kworker/u8:3: 44] platform sound.29: Driver msm8x16-asoc-wcd requests probe deferral [ 2.139058] [1: kworker/u8:3: 44] spmi msm8x16_wcd_codec-10: Driver wcd-spmi-core requests probe deferral [ 2.139102] [1: kworker/u8:3: 44] spmi msm8x16_wcd_codec-11: Driver wcd-spmi-core requests probe deferral [ 2.139359] [1: swapper/0: 1] sm5703 9-0025: sm5703_muic_probe:sm5703 muic probe called [ 2.139432] [1: swapper/0: 1] sm5703_muic_parse_dt: irq-gpio: 914 [ 2.140000] [1: swapper/0: 1] sm5703_muic_reg_init is called [ 2.140405] [1: swapper/0: 1] sm5703 9-0025: sm5703_muic_reg_init dev ID: 0x1 [ 2.142468] [0: kworker/u8:3: 44] of_get_named_gpio_flags: can't parse gpios property [ 2.142487] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: msm8x16_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node [ 2.142503] [0: kworker/u8:3: 44] populate_ext_snd_card_dailinks: CARD is 8x16 wcd internal card [ 2.142521] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: default codec configured [ 2.142540] [0: kworker/u8:3: 44] msm8x16_asoc_machine_probe: ext_pa = 1 [ 2.142706] [0: kworker/u8:3: 44] get_cdc_gpio_lines [ 2.142770] [0: kworker/u8:3: 44] get_cdc_gpio_lines: no external PA connected 1 [ 2.142785] [1: swapper/0: 1] sec_jack_probe - defer as codec_probe_done is false [ 2.142794] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: Headset is using internal micbias [ 2.142819] [1: swapper/0: 1] platform earjack.81: Driver sec_jack requests probe deferral [ 2.143921] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: ASoC: CODEC (null) not registered [ 2.143958] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: snd_soc_register_card failed (-517) [ 2.144004] [0: kworker/u8:3: 44] platform sound.29: Driver msm8x16-asoc-wcd requests probe deferral [ 2.144079] [0: kworker/u8:3: 44] spmi msm8x16_wcd_codec-10: Driver wcd-spmi-core requests probe deferral [ 2.144124] [0: kworker/u8:3: 44] spmi msm8x16_wcd_codec-11: Driver wcd-spmi-core requests probe deferral [ 2.144385] [1: swapper/0: 1] usb: android_bind disconnect [ 2.144454] [1: swapper/0: 1] file system registered [ 2.144519] [1: swapper/0: 1] mbim_init: initialize 1 instances [ 2.144584] [1: swapper/0: 1] mbim_init: Initialized 1 ports [ 2.144597] [1: swapper/0: 1] mbim_bam_setup: no_ports:1 [ 2.144734] [1: swapper/0: 1] mbim_bam_setup: Initialized 1 ports [ 2.145237] [1: swapper/0: 1] [mtp_setup] line = [1782] [ 2.145394] [1: swapper/0: 1] mtp: mtp_setup success to create guid attr [ 2.145549] [1: swapper/0: 1] rndis_qc_init: initialize rndis QC instance [ 2.145940] [1: swapper/0: 1] android_usb gadget: Mass Storage Function, version: 2009/09/11 [ 2.145955] [1: swapper/0: 1] android_usb gadget: Number of LUNs=2 [ 2.145970] [1: swapper/0: 1] lun0: LUN: removable CD-ROM file: (no medium) [ 2.145984] [1: swapper/0: 1] lun1: LUN: removable file: (no medium) [ 2.146161] [1: swapper/0: 1] conn_gadget_function_init(#) call conn_gadget_setup [ 2.146174] [1: swapper/0: 1] conn_gadget_setup [ 2.146426] [1: swapper/0: 1] android_usb gadget: android_usb ready [ 2.146444] [1: swapper/0: 1] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 16 [ 2.146534] [1: swapper/0: 1] android_probe : return is 0! [ 2.147219] [0: kworker/u8:3: 44] sec_jack_probe - defer as codec_probe_done is false [ 2.147243] [0: kworker/u8:3: 44] platform earjack.81: Driver sec_jack requests probe deferral [ 2.147323] [1: swapper/0: 1] usb_notifier: notifier_probe [ 2.147340] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 2.147353] [1: swapper/0: 1] usb_notifier: There is not USB 3.0 redriver pin [ 2.147366] [1: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt: usb30_redriver_en: Invalied gpio pins [ 2.147378] [1: swapper/0: 1] usb_notifier: redriver_en : -2 [ 2.147390] [1: swapper/0: 1] usb_notifier: disable_control_en : 0 [ 2.147403] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 2.147415] [1: swapper/0: 1] usb_notifier: There is no otg_en pin [ 2.147428] [1: swapper/0: 1] usb_notify: registered otg_notify + [ 2.147549] [1: swapper/0: 1] usb_notify: registered otg_notify - [ 2.147565] [1: swapper/0: 1] usb_notifier usb-notifier.34: usb notifier probe [ 2.147646] [0: kworker/u8:3: 44] of_get_named_gpio_flags: can't parse gpios property [ 2.147664] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: msm8x16_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node [ 2.147680] [0: kworker/u8:3: 44] populate_ext_snd_card_dailinks: CARD is 8x16 wcd internal card [ 2.147699] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: default codec configured [ 2.147714] [0: kworker/u8:3: 44] msm8x16_asoc_machine_probe: ext_pa = 1 [ 2.147831] [0: kworker/u8:3: 44] get_cdc_gpio_lines [ 2.147896] [0: kworker/u8:3: 44] get_cdc_gpio_lines: no external PA connected 1 [ 2.147913] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: Headset is using internal micbias [ 2.148754] [1: swapper/0: 1] gpiod_set_debounce: gpio-1011 status -22 [ 2.148897] [1: swapper/0: 1] gpiod_set_debounce: gpio-1009 status -22 [ 2.149145] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: ASoC: CODEC (null) not registered [ 2.149172] [1: swapper/0: 1] input: gpio-keys as /devices/soc.0/gpio_keys.77/input/input7 [ 2.149187] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: snd_soc_register_card failed (-517) [ 2.149231] [0: kworker/u8:3: 44] platform sound.29: Driver msm8x16-asoc-wcd requests probe deferral [ 2.149311] [0: kworker/u8:3: 44] spmi msm8x16_wcd_codec-10: Driver wcd-spmi-core requests probe deferral [ 2.149358] [0: kworker/u8:3: 44] spmi msm8x16_wcd_codec-11: Driver wcd-spmi-core requests probe deferral [ 2.149567] [1: swapper/0: 1] hall_init start [ 2.149945] [0: kworker/u8:3: 44] sec_jack_probe - defer as codec_probe_done is false [ 2.149966] [0: kworker/u8:3: 44] platform earjack.81: Driver sec_jack requests probe deferral [ 2.150549] [0: kworker/u8:3: 44] of_get_named_gpio_flags: can't parse gpios property [ 2.150567] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: msm8x16_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node [ 2.150583] [0: kworker/u8:3: 44] populate_ext_snd_card_dailinks: CARD is 8x16 wcd internal card [ 2.150602] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: default codec configured [ 2.150617] [0: kworker/u8:3: 44] msm8x16_asoc_machine_probe: ext_pa = 1 [ 2.150221] [1: swapper/0: 1] hall_probe called [ 2.150638] [1: swapper/0: 1] init_hall_ic_irq : success [ 2.150727] [0: kworker/u8:3: 44] get_cdc_gpio_lines [ 2.150776] [1: swapper/0: 1] input: hall as /devices/soc.0/hall.78/input/input8 [ 2.150790] [0: kworker/u8:3: 44] get_cdc_gpio_lines: no external PA connected 1 [ 2.150807] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: Headset is using internal micbias [ 2.150843] [1: swapper/0: 1] hall_probe end [ 2.151206] [1: swapper/0: 1] qcom,qpnp-rtc qpnp-rtc-4: setting system clock to 2015-02-02 00:39:31 UTC (1422837571) [ 2.151939] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: ASoC: CODEC (null) not registered [ 2.151977] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: snd_soc_register_card failed (-517) [ 2.152005] [1: swapper/0: 1] msm_thermal:interrupt_mode_init Interrupt mode init [ 2.152027] [0: kworker/u8:3: 44] platform sound.29: Driver msm8x16-asoc-wcd requests probe deferral [ 2.152172] [0: kworker/u8:3: 44] spmi msm8x16_wcd_codec-10: Driver wcd-spmi-core requests probe deferral [ 2.152265] [0: kworker/u8:3: 44] spmi msm8x16_wcd_codec-11: Driver wcd-spmi-core requests probe deferral [ 2.152884] [0: kworker/u8:3: 44] sec_jack_probe - defer as codec_probe_done is false [ 2.152898] [1: swapper/0: 1] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster [ 2.152920] [0: kworker/u8:3: 44] platform earjack.81: Driver sec_jack requests probe deferral [ 2.153357] [0: kworker/u8:3: 44] of_get_named_gpio_flags: can't parse gpios property [ 2.153376] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: msm8x16_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node [ 2.153392] [0: kworker/u8:3: 44] populate_ext_snd_card_dailinks: CARD is 8x16 wcd internal card [ 2.153410] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: default codec configured [ 2.153425] [0: kworker/u8:3: 44] msm8x16_asoc_machine_probe: ext_pa = 1 [ 2.153527] [0: kworker/u8:3: 44] get_cdc_gpio_lines [ 2.153594] [0: kworker/u8:3: 44] get_cdc_gpio_lines: no external PA connected 1 [ 2.153610] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: Headset is using internal micbias [ 2.154732] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: ASoC: CODEC (null) not registered [ 2.154770] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: snd_soc_register_card failed (-517) [ 2.154819] [0: kworker/u8:3: 44] platform sound.29: Driver msm8x16-asoc-wcd requests probe deferral [ 2.154903] [0: kworker/u8:3: 44] spmi msm8x16_wcd_codec-10: Driver wcd-spmi-core requests probe deferral [ 2.154948] [0: kworker/u8:3: 44] spmi msm8x16_wcd_codec-11: Driver wcd-spmi-core requests probe deferral [ 2.155470] [0: kworker/u8:3: 44] sec_jack_probe - defer as codec_probe_done is false [ 2.155492] [0: kworker/u8:3: 44] platform earjack.81: Driver sec_jack requests probe deferral [ 2.155854] [0: kworker/u8:3: 44] of_get_named_gpio_flags: can't parse gpios property [ 2.155872] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: msm8x16_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node [ 2.155888] [0: kworker/u8:3: 44] populate_ext_snd_card_dailinks: CARD is 8x16 wcd internal card [ 2.155897] [1: swapper/0: 1] qcom,cc-debug-8916 1874000.qcom,cc-debug: Registered Debug Mux successfully [ 2.155922] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: default codec configured [ 2.155938] [0: kworker/u8:3: 44] msm8x16_asoc_machine_probe: ext_pa = 1 [ 2.156049] [0: kworker/u8:3: 44] get_cdc_gpio_lines [ 2.156113] [0: kworker/u8:3: 44] get_cdc_gpio_lines: no external PA connected 1 [ 2.156130] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: Headset is using internal micbias [ 2.157278] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: ASoC: CODEC (null) not registered [ 2.157316] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: snd_soc_register_card failed (-517) [ 2.157365] [0: kworker/u8:3: 44] platform sound.29: Driver msm8x16-asoc-wcd requests probe deferral [ 2.157384] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 2.157399] [1: swapper/0: 1] sec_bat_parse_dt reading bat_int_gpio is empty [ 2.157416] [1: swapper/0: 1] sec_bat_parse_dt: bat_irq_attr is Empty [ 2.157434] [1: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property [ 2.157451] [1: swapper/0: 1] sec_bat_parse_dt: ta_irq_attr is Empty [ 2.157459] [0: kworker/u8:3: 44] spmi msm8x16_wcd_codec-10: Driver wcd-spmi-core requests probe deferral [ 2.157495] [1: swapper/0: 1] sec_bat_parse_dt: chg_temp_check: 0 [ 2.157504] [0: kworker/u8:3: 44] spmi msm8x16_wcd_codec-11: Driver wcd-spmi-core requests probe deferral [ 2.157527] [1: swapper/0: 1] sec_bat_parse_dt: swelling_mode_skip: 0 [ 2.157644] [1: swapper/0: 1] sec_bat_parse_dt: swelling low temp chg current is Empty, Defualt value 1300mA [ 2.157657] [1: swapper/0: 1] sec_bat_parse_dt: swelling_chg_current : 0 [ 2.157674] [1: swapper/0: 1] sec_bat_parse_dt: swelling high temp chg current is Empty, Defualt value 1300mA [ 2.157687] [1: swapper/0: 1] sec_bat_parse_dt: swelling_high_chg_current : 0 [ 2.157704] [1: swapper/0: 1] sec_bat_parse_dt: swelling low temp chg current is Empty, Defualt value 1300mA [ 2.157717] [1: swapper/0: 1] sec_bat_parse_dt: swelling_low_chg_current : 0 [ 2.157734] [1: swapper/0: 1] sec_bat_parse_dt: swelling_full_check_current_2nd is Empty [ 2.157747] [1: swapper/0: 1] sec_bat_parse_dt: swelling_full_check_current_2nd : 0 [ 2.157777] [1: swapper/0: 1] sec_bat_parse_dt : SWELLING_CHG_CURRENT(0) SWELLING_HIGH_CHG_CURRENT(0) [ 2.157777] [1: swapper/0: 1] SWELLING_LOW_CHG_CURRENT(0) SWELLING_FULL_CHECK_CURRENT(0) [ 2.158133] [1: swapper/0: 1] sec_bat_parse_dt: vendor : SDI SDI, technology : 2, cable_check_type : 4 [ 2.158133] [1: swapper/0: 1] cable_source_type : 3, event_waiting_time : 600 [ 2.158133] [1: swapper/0: 1] polling_type : 1, initial_count : 3, check_count : 0 [ 2.158133] [1: swapper/0: 1] check_adc_max : 1440000, check_adc_min : 0 [ 2.158133] [1: swapper/0: 1] ovp_uvlo_check_type : 3, thermal_source : 2 [ 2.158133] [1: swapper/0: 1] temp_check_type : 2, temp_check_count : 1 [ 2.158194] [1: swapper/0: 1] board_battery_init : assign temp adc table [ 2.158254] [0: kworker/u8:3: 44] sec_jack_probe - defer as codec_probe_done is false [ 2.158370] [0: kworker/u8:3: 44] platform earjack.81: Driver sec_jack requests probe deferral [ 2.158755] [0: kworker/u8:3: 44] of_get_named_gpio_flags: can't parse gpios property [ 2.158773] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: msm8x16_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node [ 2.158789] [0: kworker/u8:3: 44] populate_ext_snd_card_dailinks: CARD is 8x16 wcd internal card [ 2.158807] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: default codec configured [ 2.158816] [1: swapper/0: 1] sm5703_get_charging_status chg_status3 = 3 [ 2.158837] [0: kworker/u8:3: 44] msm8x16_asoc_machine_probe: ext_pa = 1 [ 2.158933] [0: kworker/u8:3: 44] get_cdc_gpio_lines [ 2.158997] [0: kworker/u8:3: 44] get_cdc_gpio_lines: no external PA connected 1 [ 2.159014] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: Headset is using internal micbias [ 2.159213] [1: swapper/0: 1] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 2.159702] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_vbat: read = 0x3e9, vbat = 3910 [ 2.159753] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_vbat: batt_avgvoltage = 3907 [ 2.160093] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: ASoC: CODEC (null) not registered [ 2.160129] [0: kworker/u8:3: 44] msm8x16-asoc-wcd sound.29: snd_soc_register_card failed (-517) [ 2.160171] [1: swapper/0: 1] sm5703_get_charging_status chg_status3 = 3 [ 2.160180] [0: kworker/u8:3: 44] platform sound.29: Driver msm8x16-asoc-wcd requests probe deferral [ 2.160584] [1: swapper/0: 1] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 2.161070] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_vbat: read = 0x3e9, vbat = 3910 [ 2.161085] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_vbat: batt_avgvoltage = 3907 [ 2.161487] [1: swapper/0: 1] sm5703_get_charging_status chg_status3 = 3 [ 2.161886] [1: swapper/0: 1] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 2.162371] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_ocv: read = 0x3e7, ocv = 3902 [ 2.162774] [1: swapper/0: 1] sm5703_get_charging_status chg_status3 = 3 [ 2.163172] [1: swapper/0: 1] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 2.163658] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x800d, curr = -50 [ 2.163674] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = -24 [ 2.164075] [1: swapper/0: 1] sm5703_get_charging_status chg_status3 = 3 [ 2.164474] [1: swapper/0: 1] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 2.164959] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x800d, curr = -50 [ 2.164974] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = -24 [ 2.172380] [1: swapper/0: 1] sm5703_test_read: 0x4 = 0xbe, 0x5 = 0xef, 0x6 = 0xf3, 0x7 = 0xff, 0x8 = 0x08, 0x9 = 0x08, 0xa = 0x03, 0xb = 0x00, 0xc = 0x55, 0xd = 0x08, 0xe = 0x03, 0xf = 0x11, 0x10 = 0x17, 0x11 = 0x44, 0x12 = 0xfa, 0x13 = 0x08, 0x60 = 0x03, 0x6b = 0x20, 0x66 = 0x80, [ 2.190394] [1: swapper/0: 1] sec-battery battery.83: sec_bat_get_temperature_by_adc: Temp(237), Temp-ADC(34104) [ 2.190413] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sec_hal_fg_set_property: psp=53 [ 2.190431] [1: swapper/0: 1] sec-battery battery.83: sec_bat_get_temperature_by_adc: Temp(288), Temp-ADC(33000) [ 2.190448] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sec_hal_fg_set_property: psp=58 [ 2.190852] [1: swapper/0: 1] sm5703_get_charging_status chg_status3 = 3 [ 2.191252] [1: swapper/0: 1] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 2.191653] [1: swapper/0: 1] sm5703_get_charging_health : charger->is_charging = 0, charger->cable_type = 0, is_current_reduced = 0 [ 2.191667] [1: swapper/0: 1] sm5703_get_charging_health : vbus_status = 32 [ 2.191680] [1: swapper/0: 1] sm5703_get_charging_health : Health : 1 [ 2.191696] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_soc: curr_cal = 0x7500 , ta_exist = 0 [ 2.192181] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: fg_vbatocv_check: iocv_error_count (0) [ 2.192197] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: fg_vbatocv_check: mode change to mix RS auto mode [ 2.193068] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_soc: temp_fg = 323 , batt_temp = 237, volt_cal = 0x8000, curr_cal = 0x7500, high_temp_cal_fact = 0, low_temp_cal_fact = 2 [ 2.193937] [1: swapper/0: 1] sm5703-fuelgauge 10-0071: sm5703_get_soc: read = 0x3a34, soc = 582 [ 2.195817] [1: swapper/0: 1] 0xAC=0x1f60, 0xAD=0x20e9, 0xAE=0x225c, 0xAF=0x2399 [ 2.197694] [1: swapper/0: 1] 0xBC=0x1f60, 0xBD=0x20e9, 0xBE=0x225c, 0xBF=0x2399 [ 2.199574] [1: swapper/0: 1] 0xCC=0x0c40, 0xCD=0x10e2, 0xCE=0x1497, 0xCF=0x149c [ 2.201514] [1: swapper/0: 1] 0x85=0x018b, 0x86=0x0080, 0x87=0x17fc, 0x28=0x0c28 [ 2.201535] [1: swapper/0: 1] sec-battery battery.83: sec_bat_get_battery_info:Vnow(3910mV),Inow(-50mA),Imax(950mA),SOC(58%),Tbat(237),Tchg(0),is_hc_usb(0) [ 2.202463] [1: swapper/0: 1] cable_initial_check : current_cable_type : (1) [ 2.202867] [1: swapper/0: 1] sec_chg_get_property: Charger Cable type : 0 [ 2.202896] [1: swapper/0: 1] sec-battery battery.83: sec_battery_probe: SEC Battery Driver Loaded [ 2.203001] [1: kworker/u8:1: 36] spmi msm8x16_wcd_codec-10: Driver wcd-spmi-core requests probe deferral [ 2.203046] [1: kworker/u8:1: 36] spmi msm8x16_wcd_codec-11: Driver wcd-spmi-core requests probe deferral [ 2.203343] [0: kworker/u8:3: 44] sm5703_get_charging_status chg_status3 = 3 [ 2.203587] [1: kworker/u8:1: 36] sec_jack_probe - defer as codec_probe_done is false [ 2.203607] [1: kworker/u8:1: 36] platform earjack.81: Driver sec_jack requests probe deferral [ 2.203745] [0: kworker/u8:3: 44] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 2.203970] [1: kworker/u8:1: 36] of_get_named_gpio_flags: can't parse gpios property [ 2.203988] [1: kworker/u8:1: 36] msm8x16-asoc-wcd sound.29: msm8x16_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node [ 2.204004] [1: kworker/u8:1: 36] populate_ext_snd_card_dailinks: CARD is 8x16 wcd internal card [ 2.204021] [1: kworker/u8:1: 36] msm8x16-asoc-wcd sound.29: default codec configured [ 2.204037] [1: kworker/u8:1: 36] msm8x16_asoc_machine_probe: ext_pa = 1 [ 2.204133] [1: kworker/u8:1: 36] get_cdc_gpio_lines [ 2.204198] [1: kworker/u8:1: 36] get_cdc_gpio_lines: no external PA connected 1 [ 2.204214] [1: kworker/u8:1: 36] msm8x16-asoc-wcd sound.29: Headset is using internal micbias [ 2.204233] [0: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_vbat: read = 0x3fb, vbat = 3980 [ 2.204249] [0: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_vbat: batt_avgvoltage = 3926 [ 2.204653] [0: kworker/u8:3: 44] sm5703_get_charging_status chg_status3 = 3 [ 2.205052] [0: kworker/u8:3: 44] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 2.205255] [1: kworker/u8:1: 36] msm8x16-asoc-wcd sound.29: ASoC: CODEC (null) not registered [ 2.205290] [1: kworker/u8:1: 36] msm8x16-asoc-wcd sound.29: snd_soc_register_card failed (-517) [ 2.205334] [1: kworker/u8:1: 36] platform sound.29: Driver msm8x16-asoc-wcd requests probe deferral [ 2.205544] [0: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_vbat: read = 0x3fb, vbat = 3980 [ 2.205559] [0: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_vbat: batt_avgvoltage = 3935 [ 2.205660] [1: swapper/0: 1] clock_late_init: Removing enables held for handed-off clocks [ 2.206114] [0: kworker/u8:3: 44] sm5703_get_charging_status chg_status3 = 3 [ 2.206987] [0: kworker/u8:3: 44] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 2.208195] [0: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_ocv: read = 0x3e7, ocv = 3902 [ 2.208689] [1: swapper/0: 1] ALSA device list: [ 2.208703] [1: swapper/0: 1] No soundcards found. [ 2.208885] [1: swapper/0: 1] Warning: unable to open an initial console. [ 2.208965] [1: swapper/0: 1] Freeing unused kernel memory: 64K (c1200000 - c1210000) [ 2.209931] [0: kworker/u8:3: 44] sm5703_get_charging_status chg_status3 = 3 [ 2.210519] [1: init: 1] !@Boot: start init process [ 2.210597] [0: kworker/u8:3: 44] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 2.210643] [1: init: 1] init: init started! [ 2.211023] [1: init: 1] check_simslot_count_dt:simslot_pin : 974 [ 2.211037] [1: init: 1] check_simslot_count_dt:low_is_dual : 1 [ 2.211061] [1: init: 1] check_simslot_count_dt:SIM Check : DUAL_SIM [0] [ 2.211131] [1: init: 1] init: property_set("ro.multisim.simslotcount", "2") failed [ 2.211156] [1: init: 1] init: property_set("persist.radio.multisim.config", "dsds") failed [ 2.211343] [1: init: 1] init: Function: selinux_compare_spd_ram, index[0], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0033 [ 2.211397] [0: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x800d, curr = -50 [ 2.211413] [0: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = -37 [ 2.212070] [0: kworker/u8:3: 44] sm5703_get_charging_status chg_status3 = 3 [ 2.212719] [0: kworker/u8:3: 44] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 2.213505] [0: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x800d, curr = -50 [ 2.213522] [0: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = -43 [ 2.219649] [1: init: 1] SELinux: 2048 avtab hash slots, 29555 rules. [ 2.225657] [0: kworker/u8:3: 44] sm5703_test_read: 0x4 = 0xbe, 0x5 = 0xef, 0x6 = 0xf3, 0x7 = 0xff, 0x8 = 0x08, 0x9 = 0x08, 0xa = 0x03, 0xb = 0x00, 0xc = 0x55, 0xd = 0x08, 0xe = 0x03, 0xf = 0x11, 0x10 = 0x17, 0x11 = 0x44, 0x12 = 0xfa, 0x13 = 0x08, 0x60 = 0x03, 0x6b = 0x20, 0x66 = 0x80, [ 2.241329] [1: init: 1] SELinux: 2048 avtab hash slots, 29555 rules. [ 2.241433] [1: init: 1] SELinux: 1 users, 2 roles, 2682 types, 0 bools, 1 sens, 1024 cats [ 2.241449] [1: init: 1] SELinux: 87 classes, 29555 rules [ 2.244320] [0: kworker/u8:3: 44] sec-battery battery.83: sec_bat_get_temperature_by_adc: Temp(237), Temp-ADC(34102) [ 2.244350] [0: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sec_hal_fg_set_property: psp=53 [ 2.244370] [0: kworker/u8:3: 44] sec-battery battery.83: sec_bat_get_temperature_by_adc: Temp(288), Temp-ADC(33000) [ 2.244387] [0: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sec_hal_fg_set_property: psp=58 [ 2.245048] [0: kworker/u8:3: 44] sm5703_get_charging_status chg_status3 = 3 [ 2.245694] [0: kworker/u8:3: 44] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 2.246345] [0: kworker/u8:3: 44] sm5703_get_charging_health : charger->is_charging = 0, charger->cable_type = 0, is_current_reduced = 0 [ 2.246359] [0: kworker/u8:3: 44] sm5703_get_charging_health : vbus_status = 32 [ 2.246372] [0: kworker/u8:3: 44] sm5703_get_charging_health : Health : 1 [ 2.246389] [0: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_soc: curr_cal = 0x7500 , ta_exist = 0 [ 2.247174] [0: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: fg_vbatocv_check: iocv_error_count (0) [ 2.247190] [0: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: fg_vbatocv_check: mode change to mix RS auto mode [ 2.248616] [0: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_soc: temp_fg = 323 , batt_temp = 237, volt_cal = 0x8000, curr_cal = 0x7500, high_temp_cal_fact = 0, low_temp_cal_fact = 2 [ 2.248841] [1: init: 1] SELinux: Completing initialization. [ 2.248857] [1: init: 1] SELinux: Setting up existing superblocks. [ 2.248886] [1: init: 1] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 2.248909] [1: init: 1] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 2.248975] [1: init: 1] SELinux: initialized (dev bdev, type bdev), not configured for labeling [ 2.249003] [1: init: 1] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 2.249037] [1: init: 1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 2.249068] [1: init: 1] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 2.250102] [0: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_soc: read = 0x3a34, soc = 582 [ 2.253157] [0: kworker/u8:3: 44] 0xAC=0x1f60, 0xAD=0x20e9, 0xAE=0x225c, 0xAF=0x2399 [ 2.254956] [1: init: 1] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 2.254982] [1: init: 1] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 2.255005] [1: init: 1] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 2.255025] [1: init: 1] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 2.255058] [1: init: 1] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 2.255124] [1: init: 1] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts [ 2.255141] [1: init: 1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 2.255173] [1: init: 1] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 2.256202] [0: kworker/u8:3: 44] 0xBC=0x1f60, 0xBD=0x20e9, 0xBE=0x225c, 0xBF=0x2399 [ 2.259246] [0: kworker/u8:3: 44] 0xCC=0x0c40, 0xCD=0x10e2, 0xCE=0x1497, 0xCF=0x149c [ 2.262344] [0: kworker/u8:3: 44] 0x85=0x018b, 0x86=0x0080, 0x87=0x17fc, 0x28=0x0c28 [ 2.262367] [0: kworker/u8:3: 44] sec-battery battery.83: sec_bat_get_battery_info:Vnow(3980mV),Inow(-50mA),Imax(950mA),SOC(58%),Tbat(237),Tchg(0),is_hc_usb(0) [ 2.262385] [0: kworker/u8:3: 44] sec-battery battery.83: sec_bat_battery_cable_check: Battery Connected [ 2.262406] [0: kworker/u8:3: 44] sec-battery battery.83: sec_bat_monitor_work: Status(Discharging), Mode(None), Health(Good), Cable(1), Vendor(SDI SDI), level(100%) [ 2.325226] [0: init: 1] init: SELinux: Loaded policy from /sepolicy [ 2.419777] [0: init: 1] inside Iccc_SaveData_Kernel [ 2.419796] [0: init: 1] Iccc_SaveData_Kernel: Not ready! type:0xff000002, ret:1 [ 2.420749] [0: init: 1] init: (Initializing SELinux enforcing took 0.21s.) [ 2.421032] [0: init: 1] init: Function: selinux_compare_spd_ram, index[3], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0033 [ 2.501533] [0: init: 1] init: SELinux: Loaded file_contexts contexts from /file_contexts. [ 2.503800] [0: init: 1] init: SELinux: set fc_digest(/sbin) [ 2.507357] [1: init: 1] init: init second stage started! [ 2.508935] [1: init: 1] check_simslot_count_dt:simslot_pin : 974 [ 2.508952] [1: init: 1] check_simslot_count_dt:low_is_dual : 1 [ 2.508979] [1: init: 1] check_simslot_count_dt:SIM Check : DUAL_SIM [0] [ 2.509339] [1: init: 1] init: Function: selinux_compare_spd_ram, index[3], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0033 [ 2.589495] [1: init: 1] init: SELinux: Loaded file_contexts contexts from /file_contexts. [ 2.589607] [1: init: 1] init: Function: selinux_compare_spd_ram, index[2], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0033 [ 2.593210] [1: init: 1] init: SELinux: Loaded property_contexts from /property_contexts. [ 2.593288] [1: init: 1] init: Function: selinux_compare_spd_ram, index[6], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0033 [ 2.779791] [2: kworker/2:1: 31] msm_bam_device_lpm_ok: Going to LPM now [ 2.782849] [2: kworker/2:1: 31] msm_otg 78d9000.usb: USB in low power mode [ 2.968001] [1: init: 1] init: waitpid failed: No child processes [ 2.968343] [1: init: 1] init: (Loading properties from /default.prop took 0.00s.) [ 2.970694] [1: init: 1] init: /init.rc: 28: invalid command 'ffu' [ 2.972223] [1: init: 1] init: /init.rc: 1366: invalid option 'symlink' [ 2.972609] [1: init: 1] init: (Parsing /init.environ.rc took 0.00s.) [ 2.972876] [1: init: 1] init: (Parsing /init.usb.rc took 0.00s.) [ 2.973890] [1: init: 1] init: /init.qcom.rc: 599: user option requires a user id [ 2.974851] [1: init: 1] init: /init.qcom.rc: 1065: ignored duplicate definition of service 'bugreport' [ 2.977435] [1: init: 1] init: (Parsing init.qcom.usb.rc took 0.00s.) [ 2.977963] [1: init: 1] init: init.target.rc: 243: ignored duplicate definition of service 'hbtp' [ 2.978055] [1: init: 1] init: (Parsing init.target.rc took 0.00s.) [ 2.978545] [1: init: 1] init: could not import file 'init.remove_recovery.rc' from 'init.qcom.factory.rc' [ 2.978574] [1: init: 1] init: (Parsing init.qcom.factory.rc took 0.00s.) [ 2.978598] [1: init: 1] init: (Parsing /init.qcom.rc took 0.01s.) [ 2.978982] [1: init: 1] init: (Parsing /init.usb.configfs.rc took 0.00s.) [ 2.979063] [1: init: 1] init: (Parsing /init.zygote32.rc took 0.00s.) [ 2.979171] [1: init: 1] init: (Parsing /init.trace.rc took 0.00s.) [ 2.979213] [1: init: 1] init: could not import file '/init.sec_debug.rc' from '/init.rc' [ 2.979446] [1: init: 1] init: /init.carrier.rc: 122: ignored duplicate definition of service 'umount_service' [ 2.979495] [1: init: 1] init: /init.carrier.rc: 134: ignored duplicate definition of service 'ftm_ptt' [ 2.979646] [1: init: 1] init: /init.carrier.rc: 217: ignored duplicate definition of service 'insthk' [ 2.979699] [1: init: 1] init: /init.carrier.rc: 231: ignored duplicate definition of service 'tbaseLoader' [ 2.979899] [1: init: 1] init: could not import file 'init.fac.rc' from '/init.carrier.rc' [ 2.979925] [1: init: 1] init: (Parsing /init.carrier.rc took 0.00s.) [ 2.980100] [1: init: 1] init: (Parsing /init.container.rc took 0.00s.) [ 2.980194] [1: init: 1] init: /init.rilcommon.rc: 16: ignored duplicate definition of service 'at_distributor' [ 2.980230] [1: init: 1] init: /init.rilcommon.rc: 21: ignored duplicate definition of service 'DR-daemon' [ 2.980264] [1: init: 1] init: /init.rilcommon.rc: 26: ignored duplicate definition of service 'BCS-daemon' [ 2.980336] [1: init: 1] init: could not import file '/init.rilcarrier.rc' from '/init.rilcommon.rc' [ 2.980422] [1: init: 1] init: /init.rilchip.rc: 8: ignored duplicate definition of service 'ril-daemon' [ 2.980479] [1: init: 1] init: /init.rilchip.rc: 22: ignored duplicate definition of service 'qmuxd' [ 2.980517] [1: init: 1] init: /init.rilchip.rc: 27: ignored duplicate definition of service 'diag_mdlog_start' [ 2.980556] [1: init: 1] init: /init.rilchip.rc: 34: ignored duplicate definition of service 'diag_mdlog_stop' [ 2.980622] [1: init: 1] init: /init.rilchip.rc: 49: ignored duplicate definition of service 'SMD-daemon' [ 2.980702] [1: init: 1] init: (Parsing /init.rilchip.rc took 0.00s.) [ 2.980768] [1: init: 1] init: /init.rilepdg.rc: 10: ignored duplicate definition of service 'vpnclientd' [ 2.980806] [1: init: 1] init: (Parsing /init.rilepdg.rc took 0.00s.) [ 2.980830] [1: init: 1] init: (Parsing /init.rilcommon.rc took 0.00s.) [ 2.980853] [1: init: 1] init: (Parsing /init.rc took 0.01s.) [ 2.981232] [1: init: 1] init: Starting service 'ueventd'... [ 2.986140] [0: ueventd: 207] ueventd: ueventd started! [ 2.987627] [0: ueventd: 207] ueventd: Function: selinux_compare_spd_ram, index[3], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0033 [ 3.068413] [0: ueventd: 207] ueventd: SELinux: Loaded file_contexts contexts from /file_contexts. [ 3.072774] [0: ueventd: 207] ueventd: Function: selinux_compare_spd_ram, index[3], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0033 [ 3.080779] [1: init: 1] init: Waiting for /dev/.coldboot_done... [ 3.153445] [0: ueventd: 207] ueventd: SELinux: Loaded file_contexts contexts from /file_contexts. [ 3.263166] [1: kworker/u8:3: 44] sm5703_get_charging_status chg_status3 = 3 [ 3.263815] [1: kworker/u8:3: 44] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 3.264599] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_vbat: read = 0x3f9, vbat = 3972 [ 3.264614] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_vbat: batt_avgvoltage = 3955 [ 3.265264] [1: kworker/u8:3: 44] sm5703_get_charging_status chg_status3 = 3 [ 3.265906] [1: kworker/u8:3: 44] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 3.266687] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_vbat: read = 0x3f9, vbat = 3972 [ 3.266702] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_vbat: batt_avgvoltage = 3965 [ 3.267350] [1: kworker/u8:3: 44] sm5703_get_charging_status chg_status3 = 3 [ 3.267991] [1: kworker/u8:3: 44] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 3.268772] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_ocv: read = 0x3e7, ocv = 3902 [ 3.269420] [1: kworker/u8:3: 44] sm5703_get_charging_status chg_status3 = 3 [ 3.270164] [1: kworker/u8:3: 44] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 3.270952] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x45, curr = 269 [ 3.270968] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = 33 [ 3.271620] [1: kworker/u8:3: 44] sm5703_get_charging_status chg_status3 = 3 [ 3.272262] [1: kworker/u8:3: 44] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 3.273045] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x45, curr = 269 [ 3.273061] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = 71 [ 3.285187] [1: kworker/u8:3: 44] sm5703_test_read: 0x4 = 0xbe, 0x5 = 0xef, 0x6 = 0xf3, 0x7 = 0xff, 0x8 = 0x08, 0x9 = 0x08, 0xa = 0x03, 0xb = 0x00, 0xc = 0x55, 0xd = 0x08, 0xe = 0x03, 0xf = 0x11, 0x10 = 0x17, 0x11 = 0x44, 0x12 = 0xfa, 0x13 = 0x08, 0x60 = 0x03, 0x6b = 0x20, 0x66 = 0x80, [ 3.303808] [1: kworker/u8:3: 44] sec-battery battery.83: sec_bat_get_temperature_by_adc: Temp(237), Temp-ADC(34100) [ 3.303834] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sec_hal_fg_set_property: psp=53 [ 3.303851] [1: kworker/u8:3: 44] sec-battery battery.83: sec_bat_get_temperature_by_adc: Temp(288), Temp-ADC(33000) [ 3.303869] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sec_hal_fg_set_property: psp=58 [ 3.304526] [1: kworker/u8:3: 44] sm5703_get_charging_status chg_status3 = 3 [ 3.305169] [1: kworker/u8:3: 44] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 3.305814] [1: kworker/u8:3: 44] sm5703_get_charging_health : charger->is_charging = 0, charger->cable_type = 0, is_current_reduced = 0 [ 3.305828] [1: kworker/u8:3: 44] sm5703_get_charging_health : vbus_status = 32 [ 3.305841] [1: kworker/u8:3: 44] sm5703_get_charging_health : Health : 1 [ 3.305857] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_soc: curr_cal = 0x7500 , ta_exist = 1 [ 3.306639] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: fg_vbatocv_check: iocv_error_count (0) [ 3.306654] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: fg_vbatocv_check: mode change to mix RS auto mode [ 3.308070] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_soc: temp_fg = 323 , batt_temp = 237, volt_cal = 0x8000, curr_cal = 0x7400, high_temp_cal_fact = 0, low_temp_cal_fact = 1 [ 3.309480] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_soc: read = 0x3a34, soc = 582 [ 3.312580] [1: kworker/u8:3: 44] 0xAC=0x1f60, 0xAD=0x20e9, 0xAE=0x20e9, 0xAF=0x2399 [ 3.315623] [1: kworker/u8:3: 44] 0xBC=0x1f60, 0xBD=0x20e9, 0xBE=0x225c, 0xBF=0x2399 [ 3.318670] [1: kworker/u8:3: 44] 0xCC=0x2399, 0xCD=0x10e2, 0xCE=0x1497, 0xCF=0x149c [ 3.321780] [1: kworker/u8:3: 44] 0x85=0x019a, 0x86=0x805f, 0x87=0x17fc, 0x28=0x0b54 [ 3.321804] [1: kworker/u8:3: 44] sec-battery battery.83: sec_bat_get_battery_info:Vnow(3972mV),Inow(269mA),Imax(950mA),SOC(58%),Tbat(237),Tchg(0),is_hc_usb(0) [ 3.321822] [1: kworker/u8:3: 44] sec-battery battery.83: sec_bat_battery_cable_check: Battery Connected [ 3.321841] [1: kworker/u8:3: 44] sec-battery battery.83: sec_bat_monitor_work: Status(Discharging), Mode(None), Health(Good), Cable(1), Vendor(SDI SDI), level(100%) [ 3.413170] [0: ueventd: 207] sm5703_get_charging_status chg_status3 = 3 [ 3.413816] [0: ueventd: 207] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 3.414469] [0: ueventd: 207] sm5703_get_charging_status chg_status3 = 3 [ 3.415110] [0: ueventd: 207] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 3.415891] [0: ueventd: 207] sm5703-fuelgauge 10-0071: sm5703_get_vbat: read = 0x3fb, vbat = 3980 [ 3.415907] [0: ueventd: 207] sm5703-fuelgauge 10-0071: sm5703_get_vbat: batt_avgvoltage = 3970 [ 3.416555] [0: ueventd: 207] sm5703_get_charging_status chg_status3 = 3 [ 3.417196] [0: ueventd: 207] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 3.417845] [0: ueventd: 207] sm5703_get_charging_status chg_status3 = 3 [ 3.418486] [0: ueventd: 207] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 3.419267] [0: ueventd: 207] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x45, curr = 269 [ 3.419282] [0: ueventd: 207] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = 170 [ 3.419984] [0: ueventd: 207] sm5703_get_charging_status chg_status3 = 3 [ 3.420627] [0: ueventd: 207] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 3.421409] [0: ueventd: 207] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x45, curr = 269 [ 3.421425] [0: ueventd: 207] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = 219 [ 3.422073] [0: ueventd: 207] sm5703_get_charging_status chg_status3 = 3 [ 3.422714] [0: ueventd: 207] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 3.422732] [0: ueventd: 207] power_supply sm5703-fuelgauge: driver failed to report `energy_now' property: -22 [ 3.425626] [0: ueventd: 207] sm5703_get_charging_status chg_status3 = 3 [ 3.426270] [0: ueventd: 207] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 3.426919] [0: ueventd: 207] sm5703_get_charging_health : charger->is_charging = 0, charger->cable_type = 0, is_current_reduced = 0 [ 3.426933] [0: ueventd: 207] sm5703_get_charging_health : vbus_status = 32 [ 3.426947] [0: ueventd: 207] sm5703_get_charging_health : Health : 1 [ 3.427593] [0: ueventd: 207] sec_chg_get_property: batt_present : 1 [ 3.428235] [0: ueventd: 207] sec_chg_get_property: Charger Cable type : 0 [ 3.440398] [0: ueventd: 207] sm5703_test_read: 0x4 = 0xbe, 0x5 = 0xef, 0x6 = 0xf3, 0x7 = 0xff, 0x8 = 0x08, 0x9 = 0x08, 0xa = 0x03, 0xb = 0x00, 0xc = 0x55, 0xd = 0x08, 0xe = 0x03, 0xf = 0x11, 0x10 = 0x17, 0x11 = 0x44, 0x12 = 0xfa, 0x13 = 0x08, 0x60 = 0x03, 0x6b = 0x20, 0x66 = 0x80, [ 3.441692] [0: ueventd: 207] power_supply sm5703-charger: driver failed to report `input_current_max' property: -22 [ 4.322571] [1: kworker/u8:3: 44] sm5703_get_charging_status chg_status3 = 3 [ 4.323217] [1: kworker/u8:3: 44] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 4.324001] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_vbat: read = 0x3fc, vbat = 3984 [ 4.324016] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_vbat: batt_avgvoltage = 3974 [ 4.324665] [1: kworker/u8:3: 44] sm5703_get_charging_status chg_status3 = 3 [ 4.325307] [1: kworker/u8:3: 44] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 4.326087] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_vbat: read = 0x3fc, vbat = 3984 [ 4.326102] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_vbat: batt_avgvoltage = 3976 [ 4.326749] [1: kworker/u8:3: 44] sm5703_get_charging_status chg_status3 = 3 [ 4.327390] [1: kworker/u8:3: 44] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 4.328170] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_ocv: read = 0x3e7, ocv = 3902 [ 4.328817] [1: kworker/u8:3: 44] sm5703_get_charging_status chg_status3 = 3 [ 4.329457] [1: kworker/u8:3: 44] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 4.330342] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x42, curr = 257 [ 4.330361] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = 241 [ 4.331013] [1: kworker/u8:3: 44] sm5703_get_charging_status chg_status3 = 3 [ 4.331656] [1: kworker/u8:3: 44] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 4.332439] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x42, curr = 257 [ 4.332455] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = 252 [ 4.344543] [1: kworker/u8:3: 44] sm5703_test_read: 0x4 = 0xbe, 0x5 = 0xef, 0x6 = 0xf3, 0x7 = 0xff, 0x8 = 0x08, 0x9 = 0x08, 0xa = 0x03, 0xb = 0x00, 0xc = 0x55, 0xd = 0x08, 0xe = 0x03, 0xf = 0x11, 0x10 = 0x17, 0x11 = 0x44, 0x12 = 0xfa, 0x13 = 0x08, 0x60 = 0x03, 0x6b = 0x20, 0x66 = 0x80, [ 4.363074] [1: kworker/u8:3: 44] sec-battery battery.83: sec_bat_get_temperature_by_adc: Temp(237), Temp-ADC(34099) [ 4.363098] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sec_hal_fg_set_property: psp=53 [ 4.363116] [1: kworker/u8:3: 44] sec-battery battery.83: sec_bat_get_temperature_by_adc: Temp(288), Temp-ADC(33000) [ 4.363132] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sec_hal_fg_set_property: psp=58 [ 4.363786] [1: kworker/u8:3: 44] sm5703_get_charging_status chg_status3 = 3 [ 4.364428] [1: kworker/u8:3: 44] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 0 [ 4.365072] [1: kworker/u8:3: 44] sm5703_get_charging_health : charger->is_charging = 0, charger->cable_type = 0, is_current_reduced = 0 [ 4.365086] [1: kworker/u8:3: 44] sm5703_get_charging_health : vbus_status = 32 [ 4.365099] [1: kworker/u8:3: 44] sm5703_get_charging_health : Health : 1 [ 4.365115] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_soc: curr_cal = 0x7500 , ta_exist = 1 [ 4.365896] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: fg_vbatocv_check: iocv_error_count (0) [ 4.365912] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: fg_vbatocv_check: mode change to mix RS auto mode [ 4.367328] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_soc: temp_fg = 323 , batt_temp = 237, volt_cal = 0x8000, curr_cal = 0x7400, high_temp_cal_fact = 0, low_temp_cal_fact = 1 [ 4.368739] [1: kworker/u8:3: 44] sm5703-fuelgauge 10-0071: sm5703_get_soc: read = 0x3a40, soc = 582 [ 4.371821] [1: kworker/u8:3: 44] 0xAC=0x1f60, 0xAD=0x20e9, 0xAE=0x20e9, 0xAF=0x2399 [ 4.374862] [1: kworker/u8:3: 44] 0xBC=0x1f60, 0xBD=0x1f60, 0xBE=0x225c, 0xBF=0x2399 [ 4.377908] [1: kworker/u8:3: 44] 0xCC=0x0c40, 0xCD=0x10e2, 0xCE=0x1497, 0xCF=0x149c [ 4.381007] [1: kworker/u8:3: 44] 0x85=0x01bc, 0x86=0x805d, 0x87=0x17fe, 0x28=0x0a84 [ 4.381030] [1: kworker/u8:3: 44] sec-battery battery.83: sec_bat_get_battery_info:Vnow(3984mV),Inow(257mA),Imax(950mA),SOC(58%),Tbat(237),Tchg(0),is_hc_usb(0) [ 4.381048] [1: kworker/u8:3: 44] sec-battery battery.83: sec_bat_battery_cable_check: Battery Connected [ 4.381067] [1: kworker/u8:3: 44] sec-battery battery.83: sec_bat_monitor_work: Status(Discharging), Mode(None), Health(Good), Cable(1), Vendor(SDI SDI), level(100%) [ 4.472581] [0: ueventd: 207] ueventd: Coldboot took 1.40s. [ 4.473141] [2: init: 1] init: Waiting for /dev/.coldboot_done took 1.39s. [ 4.477746] [2: init: 1] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.478537] [2: init: 1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.481106] [2: init: 1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.481320] [2: init: 1] init: SELinux: set fc_digest(/mnt) [ 4.484346] [2: init: 1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.485034] [2: init: 1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.485265] [2: init: 1] init: SELinux: set fc_digest(/mnt/secure/asec) [ 4.487172] [2: init: 1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.487388] [2: init: 1] init: SELinux: set fc_digest(/mnt/asec) [ 4.490409] [2: init: 1] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.505605] [0: init: 1] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts [ 4.506410] [1: init: 212] fs_mgr: fs_mgr_mount_all [ 4.506610] [1: init: 212] fs_mgr: debug: ro.security_mode is 1526595584 [ 4.506633] [1: init: 212] fs_mgr: KAP is disabled [ 4.511978] [1: init: 212] EXT4-fs (mmcblk0p25): mounted filesystem without journal. Opts: errors=panic,noload,block_validity [ 4.512012] [1: init: 212] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr [ 4.512212] [1: init: 212] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/system,target=/system,type=ext4)=0 [ 4.513429] [1: init: 212] CryptfsFSCK: Decryption operation succeeded [ 4.514483] [1: init: 212] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/userdata [ 4.596815] [0: init: 212] e2fsck: e2fsck 1.42.9 (28-Dec-2013) [ 4.596815] [0: init: 212] [ 4.596890] [0: init: 212] e2fsck: skipping journal recoverybecause INCOMPAT_RECOVER was clear. [ 4.596890] [0: init: 212] [ 4.596921] [0: init: 212] e2fsck: check whether gdt & bitmap free count is vaild [ 4.596921] [0: init: 212] [ 4.596951] [0: init: 212] e2fsck: /dev/block/bootdevice/by-name/userdata: clean, 3373/399840 files, 405414/3196407 blocks [ 4.596951] [0: init: 212] [ 4.596980] [0: init: 212] e2fsck: ext2fs_close2 : normal operation, return 0 [ 4.596980] [0: init: 212] [ 4.601162] [1: init: 212] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_async_commit,errors=panic [ 4.601194] [1: init: 212] SELinux: initialized (dev mmcblk0p28, type ext4), uses xattr [ 4.601267] [1: init: 212] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=0 [ 4.601572] [1: init: 212] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/efs [ 4.622584] [0: init: 212] e2fsck: e2fsck 1.42.9 (28-Dec-2013) [ 4.622584] [0: init: 212] [ 4.622632] [0: init: 212] e2fsck: skipping journal recoverybecause INCOMPAT_RECOVER was clear. [ 4.622632] [0: init: 212] [ 4.622664] [0: init: 212] e2fsck: check whether gdt & bitmap free count is vaild [ 4.622664] [0: init: 212] [ 4.622693] [0: init: 212] e2fsck: /dev/block/bootdevice/by-name/efs: clean, 92/896 files, 1166/3584 blocks [ 4.622693] [0: init: 212] [ 4.622722] [0: init: 212] e2fsck: ext2fs_close2 : normal operation, return 0 [ 4.622722] [0: init: 212] [ 4.626308] [1: init: 212] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_async_commit,errors=panic [ 4.626339] [1: init: 212] SELinux: initialized (dev mmcblk0p13, type ext4), uses xattr [ 4.626408] [1: init: 212] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/efs,target=/efs,type=ext4)=0 [ 4.626672] [1: init: 212] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/cache [ 4.648813] [0: init: 212] e2fsck: e2fsck 1.42.9 (28-Dec-2013) [ 4.648813] [0: init: 212] [ 4.648863] [0: init: 212] e2fsck: skipping journal recoverybecause INCOMPAT_RECOVER was clear. [ 4.648863] [0: init: 212] [ 4.648894] [0: init: 212] e2fsck: check whether gdt & bitmap free count is vaild [ 4.648894] [0: init: 212] [ 4.648923] [0: init: 212] e2fsck: /dev/block/bootdevice/by-name/cache: clean, 28/12800 files, 2144/51200 blocks [ 4.648923] [0: init: 212] [ 4.648952] [0: init: 212] e2fsck: ext2fs_close2 : normal operation, return 0 [ 4.648952] [0: init: 212] [ 4.652416] [1: init: 212] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_async_commit,errors=panic [ 4.652449] [1: init: 212] SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr [ 4.652518] [1: init: 212] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/cache,target=/cache,type=ext4)=0 [ 4.653897] [1: init: 1] init: Running /dev/block/bootdevice/by-name/cache on ext4 [ 4.670931] [0: e2fsck: 229] e2fsck 1.42.9 (28-Dec-2013) [ 4.671149] [0: e2fsck: 229] /dev/block/bootdevice/by-name/cache is in use. [ 4.671179] [0: e2fsck: 229] e2fsck: Cannot continue, aborting. [ 4.671179] [0: e2fsck: 229] [ 4.671179] [0: e2fsck: 229] [ 4.672042] [0: init: 1] init: Running /dev/block/bootdevice/by-name/persist on ext4 [ 4.688827] [0: e2fsck: 232] e2fsck 1.42.9 (28-Dec-2013) [ 4.691309] [1: e2fsck: 232] skipping journal recoverybecause INCOMPAT_RECOVER was clear. [ 4.691359] [1: e2fsck: 232] check whether gdt & bitmap free count is vaild [ 4.691480] [1: e2fsck: 232] /dev/block/bootdevice/by-name/persist: clean, 33/512 files, 1085/2048 blocks [ 4.691816] [1: e2fsck: 232] ext2fs_close2 : normal operation, return 0 [ 4.695616] [1: init: 1] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_async_commit,errors=panic [ 4.695647] [1: init: 1] SELinux: initialized (dev mmcblk0p22, type ext4), uses xattr [ 4.696946] [1: init: 1] init: SELinux: Skipping restorecon_recursive(/persist) [ 4.697024] [1: init: 1] init: Running /dev/block/bootdevice/by-name/efs on ext4 [ 4.713776] [1: e2fsck: 237] e2fsck 1.42.9 (28-Dec-2013) [ 4.713990] [1: e2fsck: 237] /dev/block/bootdevice/by-name/efs is in use. [ 4.714020] [1: e2fsck: 237] e2fsck: Cannot continue, aborting. [ 4.714020] [1: e2fsck: 237] [ 4.714020] [1: e2fsck: 237] [ 4.732529] [1: init: 1] FAT-fs (mmcblk0p1[179:1]): trying to mount... [ 4.737367] [1: init: 1] FAT-fs (mmcblk0p1[179:1]): mounted successfully! [ 4.737663] [1: init: 1] SELinux: initialized (dev mmcblk0p1, type vfat), uses mountpoint labeling [ 4.738000] [1: init: 1] FAT-fs (mmcblk0p2[179:2]): trying to mount... [ 4.743142] [1: init: 1] FAT-fs (mmcblk0p2[179:2]): mounted successfully! [ 4.743182] [1: init: 1] SELinux: initialized (dev mmcblk0p2, type vfat), uses mountpoint labeling [ 4.748489] [1: init: 1] init: Running /dev/block/bootdevice/by-name/persdata on ext4 [ 4.765513] [0: e2fsck: 240] e2fsck 1.42.9 (28-Dec-2013) [ 4.767848] [1: e2fsck: 240] skipping journal recoverybecause INCOMPAT_RECOVER was clear. [ 4.767897] [1: e2fsck: 240] check whether gdt & bitmap free count is vaild [ 4.768017] [1: e2fsck: 240] /dev/block/bootdevice/by-name/persdata: clean, 18/576 files, 1074/2304 blocks [ 4.768352] [1: e2fsck: 240] ext2fs_close2 : normal operation, return 0 [ 4.772610] [1: init: 1] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: barrier=1 [ 4.772643] [1: init: 1] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr [ 4.776517] [1: init: 1] init: SELinux: Skipping restorecon_recursive(/cache) [ 4.779683] [1: init: 1] init: cannot find '/system/vendor/itson/itson-bootstrapper.sh', disabling 'itsonbs' [ 4.807423] [1: init: 1] init: property_set("ro.hwui.text_large_cache_height", "2048") failed [ 4.813490] [1: init: 1] init: property_set("ro.use_data_netmgrd", "false") failed [ 4.829443] [1: init: 1] init: /recovery not specified in fstab [ 4.832561] [1: init: 1] init: Function: selinux_compare_spd_ram, index[0], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0033 [ 4.834801] [1: init: 1] init: Function: selinux_compare_spd_ram, index[3], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0033 [ 4.849794] [1: kworker/1:1: 29] sm5703 9-0025: sm5703_muic_init_detect [ 4.850241] [1: kworker/1:1: 29] sm5703 9-0025: sm5703_muic_init_detect: intr1 : 0x0 [ 4.850674] [1: kworker/1:1: 29] sm5703 9-0025: sm5703_muic_init_detect: intr2 : 0x0 [ 4.851105] [1: kworker/1:1: 29] sm5703 9-0025: sm5703_muic_init_detect: intr1 : 0x0 [ 4.851537] [1: kworker/1:1: 29] sm5703 9-0025: sm5703_muic_init_detect: intr2 : 0x0 [ 4.854462] [1: kworker/1:1: 29] sm5703 9-0025: dev1: 0x4, dev2: 0x0, dev3: 0x0, Carkit: 0x0, ADC: 0x1f, vbus:0x3, Jig: OFF, chg_type:0x4 [ 4.854475] [1: kworker/1:1: 29] [SM5703_MUIC MUIC] USB Connected [ 4.854498] [1: kworker/1:1: 29] sm5703_muic_callback, called : cable_type :1 [ 4.854511] [1: kworker/1:1: 29] sm5703_muic_callback USB Cable status attached (1) [ 4.854525] [1: kworker/1:1: 29] usb_notify: send_otg_notify event=vbus(1) enable=1 [ 4.854539] [1: kworker/1:1: 29] usb_notify: otg_notifier_callback event=vbus(1) [ 4.854565] [1: kworker/1:1: 29] sm5703_muic_callback:MUIC setting the cable type as (4) [ 4.854575] [0: kworker/u8:3: 44] usb_notify: otg_notify_state+ event=vbus(1), enable=on [ 4.854602] [1: kworker/1:1: 29] sec-battery battery.83: sec_bat_set_property: current_cable(4), wc_status(0), wire_status(4) [ 4.854609] [0: kworker/u8:3: 44] usb_notifier: usb: msm-usb power_supply_set_present(1) [ 4.854616] [0: kworker/u8:3: 44] PMIC: BSV set [ 4.854654] [0: kworker/u8:3: 44] usb_notify: otg_notify_state- event=vbus, cable=vbus [ 4.855091] [0: kworker/u8:2: 43] sec_chg_set_property: float voltage(4350) [ 4.856331] [0: kworker/u8:2: 43] sm5703_set_regulation_voltage : SM5703_CHGCNTL3 (Battery regulation voltage) : 0x17 [ 4.857504] [0: kworker/u8:2: 43] sm5703_set_aicl_irq : SM5703_INTMSK1 (AICH-MASK) : 0xbe, mask : 0 [ 4.857517] [0: kworker/u8:2: 43] sec_chg_set_property:[BATT] Set charging, Cable type = 4 [ 4.857530] [0: kworker/u8:2: 43] sm5703_configure_charger : Set config charging [ 4.859115] [0: kworker/u8:2: 43] sm5703_configure_charger : input current (500mA) [ 4.859548] [0: kworker/u8:2: 43] sm5703_get_charging_status chg_status3 = 3 [ 4.860414] [0: kworker/u8:2: 43] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 4.861513] [0: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_ocv: read = 0x3e7, ocv = 3902 [ 4.861530] [0: kworker/u8:2: 43] sm5703_configure_charger : led_mode = 0 [ 4.861544] [0: kworker/u8:2: 43] sm5703_configure_charger : inval = 3902 [ 4.861911] [0: kworker/u8:1: 36] msm_otg 78d9000.usb: USB exited from low power mode [ 4.863582] [0: kworker/u8:2: 43] sm5703_set_input_current_limit : SM5703_VBUSCNTL (Input current limit) : 0x08 [ 4.863597] [0: kworker/u8:2: 43] sm5703_configure_charger : float voltage (4350mV) [ 4.863887] [2: kworker/u8:1: 36] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received [ 4.863914] [2: kworker/u8:1: 36] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received [ 4.864833] [0: kworker/u8:2: 43] sm5703_set_regulation_voltage : SM5703_CHGCNTL3 (Battery regulation voltage) : 0x17 [ 4.864848] [0: kworker/u8:2: 43] sm5703_configure_charger : fast charging current (500mA) [ 4.864862] [0: kworker/u8:2: 43] sm5703_configure_charger : termination current (200mA) [ 4.864876] [0: kworker/u8:2: 43] sm5703_set_charging_current adj_current = 500mA charger->siop_level = 100 [ 4.865602] [0: kworker/u8:2: 43] __sm5703_set_fast_charging_current : SM5703_CHGCNTL2 (fastchg current) : 0x08 [ 4.865616] [0: kworker/u8:2: 43] __sm5703_set_termination_current_limit : Set Termination [ 4.866749] [0: kworker/u8:2: 43] __sm5703_set_termination_current_limit : SM5703_CHGCNTL4 (Top-off current threshold) : 0x24 [ 4.866763] [0: kworker/u8:2: 43] sm5703_enable_charger_switch: turn on charger [ 4.867184] [0: kworker/u8:2: 43] sm5703-fled:sm5703_charger_notification() line-289: sm5703_charger_notification, info->boost = 0, info->powersharing = 0, mode = 0, vbus_valid = 32 [ 4.867201] [0: kworker/u8:2: 43] sm5703-fled:sm5703_charger_notification() line-290: sm5703_charger_notification, info->ta_exist = 1, info->chgon_call = 1, info->flash_status = 0 [ 4.869792] [0: kworker/u8:2: 43] sm5703-fled:sm5703_charger_notification() line-334: sm5703_charger_notification, OperationMode = 5 [ 4.870522] [0: kworker/u8:2: 43] sm5703_enable_charger_switch : STATUS OF CHARGER ON(0)/OFF(1): 0 [ 4.878262] [0: kworker/u8:2: 43] sm5703_test_read: 0x4 = 0xbe, 0x5 = 0xef, 0x6 = 0xf3, 0x7 = 0xff, 0x8 = 0x08, 0x9 = 0x08, 0xa = 0x03, 0xb = 0x00, 0xc = 0x55, 0xd = 0x08, 0xe = 0x03, 0xf = 0x08, 0x10 = 0x17, 0x11 = 0x24, 0x12 = 0xfa, 0x13 = 0x08, 0x60 = 0x02, 0x6b = 0x20, 0x66 = 0x80, [ 4.878288] [0: kworker/u8:2: 43] sec-battery battery.83: sec_bat_cable_work: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes [ 4.878304] [0: kworker/u8:2: 43] sec-battery battery.83: sec_bat_cable_work: Polling time is reset to 30 sec. [ 4.920595] [1: init: 1] init: SELinux: Loaded file_contexts contexts from /file_contexts. [ 4.920696] [1: init: 1] init: Function: selinux_compare_spd_ram, index[2], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0033 [ 4.924271] [1: init: 1] init: SELinux: Loaded property_contexts from /property_contexts. [ 4.924344] [1: init: 1] init: Function: selinux_compare_spd_ram, index[6], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0033 [ 4.959910] [1: init: 1] [oemflag]set_fuse_default [ 4.959928] [1: init: 1] [oemflag]set_fuse_name : 3 [ 4.959962] [1: init: 1] [oemflag]tamper_fuse before = 0 [ 4.959974] [1: init: 1] [oemflag]ioctl set_fuse [ 4.960002] [1: init: 1] [oemflag]tamper_fuse after = 1 [ 4.960014] [1: init: 1] [oemflag]set_fuse_name : 4 [ 4.960030] [1: init: 1] [oemflag]tamper_fuse before = 0 [ 4.960042] [1: init: 1] [oemflag]ioctl set_fuse [ 4.960061] [1: init: 1] [oemflag]tamper_fuse after = 1 [ 4.960073] [1: init: 1] [oemflag]set_fuse_name : 5 [ 4.960089] [1: init: 1] [oemflag]tamper_fuse before = 0 [ 4.960100] [1: init: 1] [oemflag]ioctl set_fuse [ 4.960120] [1: init: 1] [oemflag]tamper_fuse after = 1 [ 4.960132] [1: init: 1] [oemflag]set_fuse_name : 6 [ 4.960147] [1: init: 1] [oemflag]tamper_fuse before = 0 [ 4.960159] [1: init: 1] [oemflag]ioctl set_fuse [ 4.960178] [1: init: 1] [oemflag]tamper_fuse after = 1 [ 4.971219] [1: init: 1] init: SELinux: Skipping restorecon_recursive(/data/system) [ 4.989500] [2: init: 1] init: SELinux: Skipping restorecon_recursive(/data) [ 4.998139] [2: init: 1] init: do_restorecon: Could not access /carrier [ 5.312487] [2: init: 1] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}' [ 5.312522] [2: init: 1] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug' [ 5.312557] [2: init: 1] init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}' [ 5.312583] [2: init: 1] init: cannot expand '${persist.sys.mba_boot_timeout}' while writing to '/sys/module/pil_msa/parameters/pbl_mba_boot_timeout_ms' [ 5.312615] [2: init: 1] init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}' [ 5.312640] [2: init: 1] init: cannot expand '${persist.sys.modem_auth_timeout}' while writing to '/sys/module/pil_msa/parameters/modem_auth_timeout_ms' [ 5.312670] [2: init: 1] init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}' [ 5.312695] [2: init: 1] init: cannot expand '${persist.sys.pil_proxy_timeout}' while writing to '/sys/module/peripheral_loader/parameters/proxy_timeout_ms' [ 5.319290] [2: init: 1] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x86800000 to 0x8c000000 [ 5.325478] [3: init: 1] pil-q6v5-mss 4080000.qcom,mss: MBA: loading from 0xa9600000 to 0xa9700000 [ 5.370192] [2: kworker/u8:2: 43] sm5703_get_charging_status chg_status3 = 3 [ 5.370616] [2: kworker/u8:2: 43] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 5.371129] [2: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_vbat: read = 0x3f6, vbat = 3960 [ 5.371144] [2: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_vbat: batt_avgvoltage = 3974 [ 5.371568] [2: kworker/u8:2: 43] sm5703_get_charging_status chg_status3 = 3 [ 5.371985] [2: kworker/u8:2: 43] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 5.372497] [2: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_vbat: read = 0x3f6, vbat = 3960 [ 5.372514] [2: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_vbat: batt_avgvoltage = 3973 [ 5.372936] [2: kworker/u8:2: 43] sm5703_get_charging_status chg_status3 = 3 [ 5.373353] [2: kworker/u8:2: 43] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 5.373861] [2: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_ocv: read = 0x3e7, ocv = 3902 [ 5.374283] [2: kworker/u8:2: 43] sm5703_get_charging_status chg_status3 = 3 [ 5.374701] [2: kworker/u8:2: 43] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 5.375210] [2: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x22, curr = 132 [ 5.375225] [2: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = 223 [ 5.375646] [2: kworker/u8:2: 43] sm5703_get_charging_status chg_status3 = 3 [ 5.376062] [2: kworker/u8:2: 43] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 5.376571] [2: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x22, curr = 132 [ 5.376586] [2: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = 208 [ 5.384426] [2: kworker/u8:2: 43] sm5703_test_read: 0x4 = 0xbe, 0x5 = 0xef, 0x6 = 0xf3, 0x7 = 0xff, 0x8 = 0x00, 0x9 = 0x08, 0xa = 0x03, 0xb = 0x00, 0xc = 0x55, 0xd = 0x08, 0xe = 0x03, 0xf = 0x08, 0x10 = 0x17, 0x11 = 0x24, 0x12 = 0xfa, 0x13 = 0x08, 0x60 = 0x02, 0x6b = 0x20, 0x66 = 0x80, [ 5.402336] [2: kworker/u8:2: 43] sec-battery battery.83: sec_bat_get_temperature_by_adc: Temp(237), Temp-ADC(34097) [ 5.402362] [2: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sec_hal_fg_set_property: psp=53 [ 5.402379] [2: kworker/u8:2: 43] sec-battery battery.83: sec_bat_get_temperature_by_adc: Temp(288), Temp-ADC(33000) [ 5.402396] [2: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sec_hal_fg_set_property: psp=58 [ 5.402827] [2: kworker/u8:2: 43] sm5703_get_charging_status chg_status3 = 3 [ 5.403247] [2: kworker/u8:2: 43] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 5.403673] [2: kworker/u8:2: 43] sm5703_get_charging_health : charger->is_charging = 1, charger->cable_type = 4, is_current_reduced = 0 [ 5.403687] [2: kworker/u8:2: 43] sm5703_get_charging_health : vbus_status = 32 [ 5.403700] [2: kworker/u8:2: 43] sm5703_get_charging_health : Health : 1 [ 5.403716] [2: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_soc: curr_cal = 0x7500 , ta_exist = 1 [ 5.404227] [2: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: fg_vbatocv_check: iocv_error_count (1) [ 5.404243] [2: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: fg_vbatocv_check: mode change to mix RS auto mode [ 5.405158] [2: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_soc: temp_fg = 323 , batt_temp = 237, volt_cal = 0x8000, curr_cal = 0x7400, high_temp_cal_fact = 0, low_temp_cal_fact = 1 [ 5.406074] [2: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_soc: read = 0x3a40, soc = 582 [ 5.407254] [0: init: 1] pil-q6v5-mss 4080000.qcom,mss: MBA boot done [ 5.408173] [2: kworker/u8:2: 43] 0xAC=0x1f60, 0xAD=0x20e9, 0xAE=0x225c, 0xAF=0x2399 [ 5.410180] [2: kworker/u8:2: 43] 0xBC=0x1f60, 0xBD=0x20e9, 0xBE=0x225c, 0xBF=0x2399 [ 5.412155] [2: kworker/u8:2: 43] 0xCC=0x0c40, 0xCD=0x10e2, 0xCE=0x1497, 0xCF=0x149c [ 5.414143] [2: kworker/u8:2: 43] 0x85=0x013e, 0x86=0x805d, 0x87=0x17fe, 0x28=0x0a84 [ 5.414166] [2: kworker/u8:2: 43] sec-battery battery.83: sec_bat_get_battery_info:Vnow(3960mV),Inow(132mA),Imax(500mA),SOC(58%),Tbat(237),Tchg(0),is_hc_usb(0) [ 5.432015] [0: kworker/u8:2: 43] sec-battery battery.83: sec_bat_battery_cable_check: Battery Connected [ 5.432508] [0: kworker/u8:2: 43] sm5703_get_charging_health : charger->is_charging = 1, charger->cable_type = 4, is_current_reduced = 0 [ 5.432524] [0: kworker/u8:2: 43] sm5703_get_charging_health : vbus_status = 32 [ 5.432538] [0: kworker/u8:2: 43] sm5703_get_charging_health : Health : 1 [ 5.432558] [0: kworker/u8:2: 43] sec-battery battery.83: sec_bat_time_management: Charging Time : 1 secs [ 5.432577] [0: kworker/u8:2: 43] sec-battery battery.83: sec_bat_temperature: HLT(2000) HLR(2000) HT(580), HR(530), LT(-50), LR(0) [ 5.433019] [0: kworker/u8:2: 43] sec_bat_swelling_check: status(1), swell_mode(0:0), cv(0x10fe), temp(237) [ 5.433037] [0: kworker/u8:2: 43] sec-battery battery.83: sec_bat_fullcharged_check: Charging Mode : Normal [ 5.433055] [0: kworker/u8:2: 43] sec-battery battery.83: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%) [ 5.433561] [0: kworker/u8:2: 43] sm5703_get_charging_status chg_status3 = 3 [ 5.433989] [0: kworker/u8:2: 43] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 5.434555] [0: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_vbat: read = 0x3f6, vbat = 3960 [ 5.434572] [0: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_vbat: batt_avgvoltage = 3966 [ 5.435026] [0: kworker/u8:2: 43] sm5703_get_charging_status chg_status3 = 3 [ 5.435470] [0: kworker/u8:2: 43] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 5.436019] [0: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_vbat: read = 0x3f6, vbat = 3960 [ 5.436035] [0: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_vbat: batt_avgvoltage = 3963 [ 5.436482] [0: kworker/u8:2: 43] sm5703_get_charging_status chg_status3 = 3 [ 5.436939] [0: kworker/u8:2: 43] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 5.437474] [0: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_ocv: read = 0x3e7, ocv = 3902 [ 5.437939] [0: kworker/u8:2: 43] sm5703_get_charging_status chg_status3 = 3 [ 5.438384] [0: kworker/u8:2: 43] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 5.438935] [0: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x22, curr = 132 [ 5.438951] [0: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = 170 [ 5.439390] [0: kworker/u8:2: 43] sm5703_get_charging_status chg_status3 = 3 [ 5.439816] [0: kworker/0:1: 30] sec_chg_get_property: slow-charging mode [ 5.440043] [0: kworker/u8:2: 43] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 5.440575] [0: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x22, curr = 132 [ 5.440591] [0: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = 151 [ 5.448870] [0: kworker/u8:2: 43] sm5703_test_read: 0x4 = 0xbe, 0x5 = 0xef, 0x6 = 0xf3, 0x7 = 0xff, 0x8 = 0x00, 0x9 = 0x08, 0xa = 0x03, 0xb = 0x00, 0xc = 0x55, 0xd = 0x08, 0xe = 0x03, 0xf = 0x08, 0x10 = 0x17, 0x11 = 0x24, 0x12 = 0xfa, 0x13 = 0x08, 0x60 = 0x02, 0x6b = 0x20, 0x66 = 0x80, [ 5.466937] [3: kworker/u8:2: 43] sec-battery battery.83: sec_bat_get_temperature_by_adc: Temp(237), Temp-ADC(34098) [ 5.466970] [3: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sec_hal_fg_set_property: psp=53 [ 5.466988] [3: kworker/u8:2: 43] sec-battery battery.83: sec_bat_get_temperature_by_adc: Temp(288), Temp-ADC(33000) [ 5.467006] [3: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sec_hal_fg_set_property: psp=58 [ 5.467453] [3: kworker/u8:2: 43] sm5703_get_charging_status chg_status3 = 3 [ 5.467884] [3: kworker/u8:2: 43] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 5.468320] [3: kworker/u8:2: 43] sm5703_get_charging_health : charger->is_charging = 1, charger->cable_type = 4, is_current_reduced = 0 [ 5.468334] [3: kworker/u8:2: 43] sm5703_get_charging_health : vbus_status = 32 [ 5.468347] [3: kworker/u8:2: 43] sm5703_get_charging_health : Health : 1 [ 5.468364] [3: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_soc: curr_cal = 0x7500 , ta_exist = 1 [ 5.468889] [3: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: fg_vbatocv_check: iocv_error_count (2) [ 5.468905] [3: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: fg_vbatocv_check: mode change to mix RS auto mode [ 5.469894] [3: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_soc: temp_fg = 323 , batt_temp = 237, volt_cal = 0x8000, curr_cal = 0x7400, high_temp_cal_fact = 0, low_temp_cal_fact = 1 [ 5.470843] [3: kworker/u8:2: 43] sm5703-fuelgauge 10-0071: sm5703_get_soc: read = 0x3a40, soc = 582 [ 5.472872] [3: kworker/u8:2: 43] 0xAC=0x1f60, 0xAD=0x20e9, 0xAE=0x225c, 0xAF=0x2399 [ 5.474895] [3: kworker/u8:2: 43] 0xBC=0x1f60, 0xBD=0x20e9, 0xBE=0x225c, 0xBF=0x2399 [ 5.476904] [3: kworker/u8:2: 43] 0xCC=0x0c40, 0xCD=0x10e2, 0xCE=0x1497, 0xCF=0x149c [ 5.478933] [3: kworker/u8:2: 43] 0x85=0x013e, 0x86=0x805d, 0x87=0x17fe, 0x28=0x0a84 [ 5.478964] [3: kworker/u8:2: 43] sec-battery battery.83: sec_bat_get_battery_info:Vnow(3960mV),Inow(132mA),Imax(500mA),SOC(58%),Tbat(237),Tchg(0),is_hc_usb(0) [ 5.496131] [0: kworker/u8:2: 43] sec-battery battery.83: sec_bat_battery_cable_check: Battery Connected [ 5.496605] [0: kworker/u8:2: 43] sm5703_get_charging_health : charger->is_charging = 1, charger->cable_type = 4, is_current_reduced = 0 [ 5.496624] [0: kworker/u8:2: 43] sm5703_get_charging_health : vbus_status = 32 [ 5.496637] [0: kworker/u8:2: 43] sm5703_get_charging_health : Health : 1 [ 5.496660] [0: kworker/u8:2: 43] sec-battery battery.83: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%) [ 5.496741] [0: kworker/0:1: 30] sec_chg_get_property: slow-charging mode [ 6.043734] [0: init: 1] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset [ 6.143842] I[0: swapper/0: 0] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up [ 6.143897] [0: irq/444-modem: 188] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received [ 6.144203] [0: init: 1] memshare: Modem Restart has happened [ 6.144532] [0: irq/444-modem: 188] M-Notify: General: 7 [ 6.147009] [2: kworker/u8:2: 43] sec_jack_probe - defer as codec_probe_done is false [ 6.147037] [2: kworker/u8:2: 43] platform earjack.81: Driver sec_jack requests probe deferral [ 6.147520] [2: kworker/u8:2: 43] of_get_named_gpio_flags: can't parse gpios property [ 6.147539] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: msm8x16_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node [ 6.147556] [2: kworker/u8:2: 43] populate_ext_snd_card_dailinks: CARD is 8x16 wcd internal card [ 6.147574] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: default codec configured [ 6.147589] [2: kworker/u8:2: 43] msm8x16_asoc_machine_probe: ext_pa = 1 [ 6.147700] [2: kworker/u8:2: 43] get_cdc_gpio_lines [ 6.147771] [2: kworker/u8:2: 43] get_cdc_gpio_lines: no external PA connected 1 [ 6.147789] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: Headset is using internal micbias [ 6.155967] [2: kworker/u8:2: 43] msm-pcm-routing qcom,msm-pcm-routing.39: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer [ 6.155990] [2: kworker/u8:2: 43] msm-pcm-routing qcom,msm-pcm-routing.39: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer [ 6.175873] [2: kworker/u8:2: 43] msm-pcm-routing qcom,msm-pcm-routing.39: ASoC: mux SLIM_0_RX AANC MUX has no paths [ 6.181940] [2: kworker/u8:2: 43] wcd-spmi-core msm8x16_wcd_codec-10: Error: regulator not found [ 6.187607] [2: kworker/u8:2: 43] wcd-spmi-core msm8x16_wcd_codec-10: ASoC: mux RX3 MIX1 INP3 has no paths [ 6.187763] [2: kworker/u8:2: 43] wcd-spmi-core msm8x16_wcd_codec-10: ASoC: mux RX2 MIX1 INP3 has no paths [ 6.274026] [0: init: 1] init: property_set("ro.sf.lcd_density", "320") failed [ 6.294500] [0: init: 1] init: property_set("ro.opengles.version", "196608") failed [ 6.511047] [0: init: 1] home_key wakeup status 1 [ 6.511065] [0: init: 1] volume_up wakeup status 0 [ 6.515607] [0: init: 1] init: cannot find '/system/bin/sysmon', disabling 'sysmon' [ 6.522314] [3: healthd: 335] binder: 335:335 transaction failed 29189, size 0-0 [ 6.552575] [2: sswap: 353] Adding 786428k swap on /dev/block/vnswap0. Priority:-1 extents:1 across:786428k SSFS [ 6.625043] [0: init: 1] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64' [ 6.661132] [3: qseecomd: 352] warning: `qseecomd' uses 32-bit capabilities (legacy support in use) [ 6.673617] [3: init: 1] init: cannot find '/system/bin/ss_conn_daemon', disabling 'SIDESYNC_service' [ 6.673677] [3: init: 1] init: cannot find '/system/bin/ss_kbservice_daemon', disabling 'ss_kb_service' [ 6.753410] [3: init: 1] init: cannot find '/system/bin/usb_uicc_client', disabling 'usb_uicc_daemon' [ 6.854856] [3: init: 1] init: cannot find '/system/bin/dts_configurator', disabling 'dts_configurator' [ 6.857677] [3: init: 1] init: cannot find '/system/bin/lptcpController', disabling 'lptcpgc' [ 6.872041] [3: sh: 454] init.sec.boot.sh: start [ 6.885696] [1: kworker/u8:1: 36] diag: In diag_dci_write_proc, invalid data 0xef37e000, peripheral: 0, len: 527 [ 6.903310] [0: kworker/0:0: 4] apr_tal:Modem Is Up [ 6.969909] [3: init: 1] init: cannot find '/system/xbin/perfprofd', disabling 'perfprofd' [ 6.970012] [3: init: 1] init: cannot find '/system/bin/cnd', disabling 'cnd' [ 6.970072] [3: init: 1] init: cannot find '/system/bin/dpmd', disabling 'dpmd' [ 6.986459] [3: init: 1] init: cannot find '/system/vendor/bin/fidodaemon', disabling 'fidodaemon' [ 6.986523] [3: init: 1] init: cannot find '/system/bin/gpu_snapshotd', disabling 'gpu_snapshotd' [ 6.989506] [3: init: 1] init: cannot find '/system/bin/bauthserver', disabling 'bauthserver' [ 6.989571] [3: init: 1] init: cannot find '/system/bin/vcsFPService', disabling 'vcsFPService' [ 7.104864] [1: thermal-engine: 580] msm_thermal:set_enabled enabled = 0 [ 7.162274] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> MultiMedia1 mapping ok [ 7.162786] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> MultiMedia2 mapping ok [ 7.163246] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> CS-VOICE mapping ok [ 7.163679] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> VoIP mapping ok [ 7.164134] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> MultiMedia3 mapping ok [ 7.164887] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> PRI_MI2S_RX_HOSTLESS mapping ok [ 7.165198] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok [ 7.165437] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: msm-stub-rx <-> qcom,msm-dai-q6-afe-proxy-rx.15 mapping ok [ 7.165683] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: msm-stub-tx <-> qcom,msm-dai-q6-afe-proxy-tx.15 mapping ok [ 7.167573] [2: kworker/u8:2: 43] compress asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok [ 7.171368] [1: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok [ 7.181057] [1: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> TERT_MI2S_TX_HOSTLESS mapping ok [ 7.186389] [1: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> MultiMedia5 mapping ok [ 7.191635] [1: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> Voice2 mapping ok [ 7.192434] [1: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> MultiMedia9 mapping ok [ 7.198692] [1: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> VoLTE mapping ok [ 7.200426] [1: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> VoWLAN mapping ok [ 7.210114] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> INT_HFP_BT_HOSTLESS mapping ok [ 7.214042] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> MultiMedia6 mapping ok [ 7.215183] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> LSM1 mapping ok [ 7.220011] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> LSM2 mapping ok [ 7.221890] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> LSM3 mapping ok [ 7.224942] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> LSM4 mapping ok [ 7.226581] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> LSM5 mapping ok [ 7.230980] [2: kworker/u8:2: 43] compress asoc: snd-soc-dummy-dai <-> MultiMedia7 mapping ok [ 7.236010] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> QUAT_MI2S_RX_HOSTLESS mapping ok [ 7.243916] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: msm-stub-rx <-> qcom,msm-pri-auxpcm.55 mapping ok [ 7.250309] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: msm-stub-tx <-> qcom,msm-pri-auxpcm.55 mapping ok [ 7.250620] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: msm-stub-rx <-> qcom,msm-dai-q6-bt-sco-rx.148 mapping ok [ 7.250867] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: msm-stub-tx <-> qcom,msm-dai-q6-bt-sco-tx.149 mapping ok [ 7.251093] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: msm-stub-rx <-> qcom,msm-dai-q6-int-fm-rx.151 mapping ok [ 7.251291] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: msm-stub-tx <-> qcom,msm-dai-q6-int-fm-tx.152 mapping ok [ 7.251498] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: msm-stub-rx <-> qcom,msm-dai-q6-be-afe-pcm-rx.1 mapping ok [ 7.253716] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: msm-stub-tx <-> qcom,msm-dai-q6-be-afe-pcm-tx.1 mapping ok [ 7.254282] [2: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: msm-stub-tx <-> qcom,msm-dai-q6-incall-record-t mapping ok [ 7.259992] [0: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: msm-stub-tx <-> qcom,msm-dai-q6-incall-record-r mapping ok [ 7.266546] [0: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: msm-stub-rx <-> qcom,msm-dai-q6-incall-music-rx mapping ok [ 7.269883] [0: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: msm-stub-rx <-> qcom,msm-dai-q6-incall-music-2- mapping ok [ 7.270216] [0: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> qcom,msm-dai-q6-mi2s-quat.163 mapping ok [ 7.270439] [0: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: snd-soc-dummy-dai <-> qcom,msm-dai-q6-mi2s-quat.163 mapping ok [ 7.270597] [0: kworker/u8:2: 43] msm_audrx_init(),dev_nameqcom,msm-dai-q6-mi2s-prim.161 [ 7.271461] [0: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: msm8x16_wcd_i2s_rx1 <-> qcom,msm-dai-q6-mi2s-prim.161 mapping ok [ 7.278303] [0: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: msm-stub-rx <-> qcom,msm-dai-q6-mi2s-sec.162 mapping ok [ 7.278577] [0: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: msm8x16_wcd_i2s_tx1 <-> qcom,msm-dai-q6-mi2s-tert.164 mapping ok [ 7.278761] [0: kworker/u8:2: 43] msm8x16-asoc-wcd sound.29: msm-stub-rx <-> qcom,msm-dai-q6-bt-a2dp-rx.150 mapping ok [ 7.281037] [3: init: 1] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts: barrier=1 [ 7.281078] [3: init: 1] SELinux: initialized (dev mmcblk0p27, type ext4), uses xattr [ 7.312916] [3: init: 1] usb: enabled: 0, dev->enabled: 0 [ 7.312937] [3: init: 1] enable_store: android_usb: already disabled [ 7.324035] [0: kworker/u8:2: 43] sec_jack_probe : Registering jack driver [ 7.328099] [0: kworker/u8:2: 43] sec_jack_populate_dt_pdata : earjack-detect-gpio =1012 [ 7.328171] [0: kworker/u8:2: 43] sec_jack_populate_dt_pdata : earjack-sendend-gpio =1013 [ 7.328204] [0: kworker/u8:2: 43] of_get_named_gpio_flags: can't parse gpios property [ 7.328237] [0: kworker/u8:2: 43] sec_jack_populate_dt_pdata : can not find the earjack-micbias-gpio in the dt [ 7.328273] [0: kworker/u8:2: 43] of_get_named_gpio_flags: can't parse gpios property [ 7.328300] [0: kworker/u8:2: 43] sec_jack_populate_dt_pdata : No support FSA8038 chip [ 7.328406] [0: kworker/u8:2: 43] sec_jack_populate_dt_pdata : 4, 0, 10000, 10, 0 [ 7.328527] [0: kworker/u8:2: 43] sec_jack_populate_dt_pdata : 4, 977, 10000, 10, 0 [ 7.328655] [0: kworker/u8:2: 43] sec_jack_populate_dt_pdata : 4, 978, 10000, 10, 1 [ 7.328784] [0: kworker/u8:2: 43] sec_jack_populate_dt_pdata : 4, 9999, 10000, 10, 1 [ 7.328839] [0: kworker/u8:2: 43] sec_jack_populate_dt_pdata : 3, 0, 0, 298 [ 7.328919] [0: kworker/u8:2: 43] sec_jack_populate_dt_pdata : 3, 3, 299, 362 [ 7.329027] [0: kworker/u8:2: 43] sec_jack_populate_dt_pdata : 3, 1, 363, 480 [ 7.329142] [0: kworker/u8:2: 43] sec_jack_populate_dt_pdata : 3, 2, 481, 9999 [ 7.329172] [0: kworker/u8:2: 43] sec_jack_populate_dt_pdata - btn-adc-read-count - 1 [ 7.329207] [0: kworker/u8:2: 43] sec_jack_populate_dt_pdata - mpp-channel-scaling - 2 1 1 [ 7.329499] [0: kworker/u8:2: 43] sec_jack_pinctrl_configure - active = 1 [ 7.381096] [0: kworker/u8:1: 36] sec_jack_detect_work: detect_irq(0) [ 7.381119] [0: kworker/u8:1: 36] msm8x16_enable_ear_micbias : str: MIC BIAS2 Power External [ 7.381149] [0: kworker/u8:1: 36] msm8x16_enable_ear_micbias disable the codec pin : 0 with state :0 [ 7.381511] [3: init: 1] usb: enabled: 1, dev->enabled: 0 [ 7.381532] [3: init: 1] usb: enable_store f_holder->f:mtp [ 7.381545] [3: init: 1] usb: enable_store f_holder->f:acm [ 7.381558] [3: init: 1] usb: acm is enabled. (bcdDevice=0x400) [ 7.381571] [3: init: 1] usb: enable_store f_holder->f:ffs [ 7.381588] [3: init: 1] usb: enable_store vendor=4e8,product=6860,bcdDevice=400 [ 7.381600] [3: init: 1] ,Class=0,SubClass=0,Protocol=0 [ 7.381612] [3: init: 1] usb: enable_store next cmd : usb_add_config [ 7.393608] [0: kworker/u8:1: 36] msm8x16_enable_ear_micbias : str: MIC BIAS2 Power External [ 7.393688] [0: kworker/u8:1: 36] msm8x16_enable_ear_micbias disable the codec pin : 0 with state :0 [ 7.414749] [3: init: 1] init: cannot find '/system/bin/launcher', disabling 'launcher' [ 7.476580] [0: keystore: 415] QSEECOM: qseecom_load_app: App (keymaste) does'nt exist, loading apps for first time [ 7.518013] [1: kworker/u8:2: 43] sps:BAM 0x04044000 is registered. [ 7.518960] [1: kworker/u8:2: 43] sps:BAM 0x04044000 (va:0xc7de0000) enabled: ver:0x25, number of pipes:6 [ 7.550706] [3: healthd: 335] healthd: initial Capacity max: '1000' [ 7.550810] [3: healthd: 335] sec-battery battery.83: sec_bat_store_attrs: BATT_CAPACITY_MAX(1000), fg_reset(0) [ 7.550836] [3: healthd: 335] sm5703-fuelgauge 10-0071: sm5703_fg_set_property: capacity_max changed, 1000 -> 1000 [ 7.551268] [3: healthd: 335] sm5703_get_charging_status chg_status3 = 3 [ 7.551686] [3: healthd: 335] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 7.552110] [3: healthd: 335] sm5703_get_charging_health : charger->is_charging = 1, charger->cable_type = 4, is_current_reduced = 0 [ 7.552127] [3: healthd: 335] sm5703_get_charging_health : vbus_status = 32 [ 7.552140] [3: healthd: 335] sm5703_get_charging_health : Health : 1 [ 7.552157] [3: healthd: 335] sm5703-fuelgauge 10-0071: sm5703_get_soc: curr_cal = 0x7500 , ta_exist = 1 [ 7.552661] [3: healthd: 335] sm5703-fuelgauge 10-0071: fg_vbatocv_check: iocv_error_count (3) [ 7.552677] [3: healthd: 335] sm5703-fuelgauge 10-0071: fg_vbatocv_check: mode change to mix RS auto mode [ 7.553570] [3: healthd: 335] sm5703-fuelgauge 10-0071: sm5703_get_soc: temp_fg = 323 , batt_temp = 237, volt_cal = 0x8000, curr_cal = 0x7400, high_temp_cal_fact = 0, low_temp_cal_fact = 1 [ 7.554459] [3: healthd: 335] sm5703-fuelgauge 10-0071: sm5703_get_soc: read = 0x3a40, soc = 582 [ 7.556382] [3: healthd: 335] 0xAC=0x1f60, 0xAD=0x20e9, 0xAE=0x225c, 0xAF=0x2399 [ 7.558300] [3: healthd: 335] 0xBC=0x1f60, 0xBD=0x20e9, 0xBE=0x225c, 0xBF=0x2399 [ 7.563176] [2: adbd: 669] read descriptors [ 7.563201] [2: adbd: 669] read descriptors [ 7.563218] [2: adbd: 669] read strings [ 7.563246] [2: adbd: 669] functionfs_bind : first id = 0 , old string count = 0 , string count = 1 [ 7.563261] [2: adbd: 669] functionfs_bind : first id = 0 , old string count = 0 , string count = 1 [ 7.563280] [2: adbd: 669] [mtpg_function_bind] line = [1356] [ 7.563324] [2: adbd: 669] dual speed mtp: IN/ep1in, OUT/ep1out [ 7.563462] [2: adbd: 669] DUN is registerd [ 7.563496] [2: adbd: 669] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received [ 7.573899] [0: keystore: 415] QSEECOM: qseecom_load_app: App with id 3 (keymaste) now loaded [ 7.573996] [3: qseecomd: 410] QSEECOM: qseecom_load_app: App (keymaste) does'nt exist, loading apps for first time [ 7.598884] [3: qseecomd: 410] scm_call failed: func id 0x32000101, ret: -2, syscall returns: 0xffffffda, 0x0, 0x0 [ 7.598905] [3: qseecomd: 410] QSEECOM: qseecom_load_app: scm_call to load app failed [ 7.598931] [3: qseecomd: 410] QSEECOM: qseecom_ioctl: failed load_app request: -22 [ 7.609805] [2: kworker/2:1: 31] disable_mclk: mclk_enabled 1 mclk_rsc_ref 0 [ 7.609825] [2: kworker/2:1: 31] Disable the mclk [ 7.633266] [3: healthd: 335] 0xCC=0x0c40, 0xCD=0x10e2, 0xCE=0x1497, 0xCF=0x149c [ 7.635202] [3: healthd: 335] 0x85=0x809c, 0x86=0x00a9, 0x87=0x17fe, 0x28=0x09c8 [ 7.635231] [3: healthd: 335] sec-battery battery.83: sec_bat_store_attrs: soc(58)->soc(58), BATT_CAPACITY_MAX(1000) [ 7.635710] [1: kworker/u8:6: 635] sm5703_get_charging_status chg_status3 = 3 [ 7.635936] [3: healthd: 335] healthd: batteryPogoOnlnePath not found [ 7.635966] [3: healthd: 335] healthd: batterySWSelfDischargingPath not found [ 7.635989] [3: healthd: 335] healthd: batterySecEventPath not found [ 7.636125] [1: kworker/u8:6: 635] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 7.636637] [1: kworker/u8:6: 635] sm5703-fuelgauge 10-0071: sm5703_get_vbat: read = 0x3e2, vbat = 3882 [ 7.636653] [1: kworker/u8:6: 635] sm5703-fuelgauge 10-0071: sm5703_get_vbat: batt_avgvoltage = 3942 [ 7.637069] [1: kworker/u8:6: 635] sm5703_get_charging_status chg_status3 = 3 [ 7.637476] [1: kworker/u8:6: 635] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 7.637972] [1: kworker/u8:6: 635] sm5703-fuelgauge 10-0071: sm5703_get_vbat: read = 0x3e2, vbat = 3882 [ 7.637988] [1: kworker/u8:6: 635] sm5703-fuelgauge 10-0071: sm5703_get_vbat: batt_avgvoltage = 3931 [ 7.638381] [3: healthd: 335] sec_chg_get_property: slow-charging mode [ 7.638401] [1: kworker/u8:6: 635] sm5703_get_charging_status chg_status3 = 3 [ 7.638820] [1: kworker/u8:6: 635] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 7.639317] [1: kworker/u8:6: 635] sm5703-fuelgauge 10-0071: sm5703_get_ocv: read = 0x3e7, ocv = 3902 [ 7.639877] [1: kworker/u8:6: 635] sm5703_get_charging_status chg_status3 = 3 [ 7.640295] [1: kworker/u8:6: 635] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 7.640802] [1: kworker/u8:6: 635] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x8021, curr = -128 [ 7.640818] [1: kworker/u8:6: 635] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = 76 [ 7.641237] [1: kworker/u8:6: 635] sm5703_get_charging_status chg_status3 = 3 [ 7.641649] [1: kworker/u8:6: 635] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 7.642159] [1: kworker/u8:6: 635] sm5703-fuelgauge 10-0071: sm5703_get_curr: read = 0x8021, curr = -128 [ 7.642175] [1: kworker/u8:6: 635] sm5703-fuelgauge 10-0071: sm5703_get_curr: batt_avgcurrent = 39 [ 7.644742] [0:mm-qcamera-daem: 457] msm_pm_qos_add_request: add request [ 7.652301] [0:mm-qcamera-daem: 457] msm_eeprom_power_up : E<3>[ 7.652334] [0:mm-qcamera-daem: 457] msm_camera_pinctrl_init:1443 Getting pinctrl handle failed [ 7.652350] [0:mm-qcamera-daem: 457] msm_camera_power_up:1488 Initialization of pinctrl failed [ 7.663319] [3: kworker/u8:6: 635] sm5703_test_read: 0x4 = 0xbe, 0x5 = 0xef, 0x6 = 0xf3, 0x7 = 0xff, 0x8 = 0x00, 0x9 = 0x08, 0xa = 0x03, 0xb = 0x00, 0xc = 0x55, 0xd = 0x08, 0xe = 0x03, 0xf = 0x08, 0x10 = 0x17, 0x11 = 0x24, 0x12 = 0xfa, 0x13 = 0x08, 0x60 = 0x02, 0x6b = 0x20, 0x66 = 0x80, [ 7.665440] I[0: getprop: 673] usb:: isr_reset_handler udc: eea0c000 [ 7.665464] I[0: getprop: 673] usb: composite_disconnect [ 7.665540] [0: kworker/0:0: 4] android_work: android_work: did not send uevent (0 0 (null)) [ 7.668413] [3: healthd: 335] healthd: battery l=58 v=3882 t=23.7 h=2 st=2 c=0 o=4 ca=151 ct=2 ps=0 hv=0 chg=u 2017-02-02 20:38:29.838322551 UTC [ 7.668448] [3: healthd: 335] healthd-android: healthd_mode_android_battery_update [ 7.668472] [3: healthd: 335] BatteryPropertiesRegistrar: notifyListeners : start [ 7.668495] [3: healthd: 335] BatteryPropertiesRegistrar: notifyListeners : done [ 7.690627] [3: kworker/u8:6: 635] sec-battery battery.83: sec_bat_get_temperature_by_adc: Temp(237), Temp-ADC(34101) [ 7.690655] [3: kworker/u8:6: 635] sm5703-fuelgauge 10-0071: sec_hal_fg_set_property: psp=53 [ 7.690673] [3: kworker/u8:6: 635] sec-battery battery.83: sec_bat_get_temperature_by_adc: Temp(288), Temp-ADC(33000) [ 7.690691] [3: kworker/u8:6: 635] sm5703-fuelgauge 10-0071: sec_hal_fg_set_property: psp=58 [ 7.691121] [3: kworker/u8:6: 635] sm5703_get_charging_status chg_status3 = 3 [ 7.691540] [3: kworker/u8:6: 635] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 7.691989] [3: kworker/u8:6: 635] sm5703_get_charging_health : charger->is_charging = 1, charger->cable_type = 4, is_current_reduced = 0 [ 7.692004] [3: kworker/u8:6: 635] sm5703_get_charging_health : vbus_status = 32 [ 7.692017] [3: kworker/u8:6: 635] sm5703_get_charging_health : Health : 1 [ 7.692035] [3: kworker/u8:6: 635] sm5703-fuelgauge 10-0071: sm5703_get_soc: curr_cal = 0x7500 , ta_exist = 0 [ 7.692580] [3: kworker/u8:6: 635] sm5703-fuelgauge 10-0071: fg_vbatocv_check: iocv_error_count (0) [ 7.692600] [3: kworker/u8:6: 635] sm5703-fuelgauge 10-0071: fg_vbatocv_check: mode change to mix RS auto mode [ 7.684145] [0:mm-qcamera-daem: 457] msm_eeprom_power_down : E [ 7.695740] [0:mm-qcamera-daem: 457] msm_eeprom_power_up : E<3>[ 7.695769] [0:mm-qcamera-daem: 457] msm_camera_pinctrl_init:1443 Getting pinctrl handle failed [ 7.695783] [0:mm-qcamera-daem: 457] msm_camera_power_up:1488 Initialization of pinctrl failed [ 7.697657] [3: kworker/u8:6: 635] sm5703-fuelgauge 10-0071: sm5703_get_soc: temp_fg = 323 , batt_temp = 237, volt_cal = 0x8000, curr_cal = 0x7500, high_temp_cal_fact = 0, low_temp_cal_fact = 2 [ 7.698561] [3: kworker/u8:6: 635] sm5703-fuelgauge 10-0071: sm5703_get_soc: read = 0x3a40, soc = 582 [ 7.702766] [0:mm-qcamera-daem: 457] msm_eeprom_power_down : E [ 7.707956] [0:mm-qcamera-daem: 457] msm_eeprom_power_up : E<3>[ 7.707991] [0:mm-qcamera-daem: 457] msm_camera_pinctrl_init:1443 Getting pinctrl handle failed [ 7.708008] [0:mm-qcamera-daem: 457] msm_camera_power_up:1488 Initialization of pinctrl failed [ 7.711163] [3: kworker/u8:6: 635] 0xAC=0x1f60, 0xAD=0x20e9, 0xAE=0x225c, 0xAF=0x2399 [ 7.713094] [3: kworker/u8:6: 635] 0xBC=0x1f60, 0xBD=0x20e9, 0xBE=0x225c, 0xBF=0x2399 [ 7.714477] [0:mm-qcamera-daem: 457] msm_eeprom_power_down : E [ 7.726948] [0:mm-qcamera-daem: 457] msm_eeprom_power_up : E<3>[ 7.726978] [0:mm-qcamera-daem: 457] msm_camera_pinctrl_init:1443 Getting pinctrl handle failed [ 7.726993] [0:mm-qcamera-daem: 457] msm_camera_power_up:1488 Initialization of pinctrl failed [ 7.731824] [3: insthk: 645] QSEECOM: qseecom_load_app: App (sshdcpap) does'nt exist, loading apps for first time [ 7.733435] I[0: rild: 393] usb: GET_DES [ 7.733601] [0: kworker/0:0: 4] android_work: android_work: sent uevent USB_STATE=CONNECTED [ 7.736577] I[0: rild: 393] usb: set_config_number single config num=0 [ 7.736597] I[0: rild: 393] usb: set_interface_count next_interface_id=4 [ 7.736834] I[0: rild: 393] usb: set_config_number single config num=0 [ 7.736850] I[0: rild: 393] usb: set_interface_count next_interface_id=4 [ 7.743536] [0:mm-qcamera-daem: 457] msm_eeprom_power_down : E [ 7.750765] [0:mm-qcamera-daem: 457] msm_sensor_fill_actuator_subdevid_by_name qcom,actuator cell index 0, rc 0 [ 7.751818] [0:mm-qcamera-daem: 457] sm5703-regulator CAM_SENSOR_A2.8V sm5703_regulator_is_enabled ret (0) [ 7.751835] [0:mm-qcamera-daem: 457] sm5703-regulator Enable regulator CAM_SENSOR_A2.8V [ 7.751849] [0:mm-qcamera-daem: 457] sm5703_regulator_enable desc.id = 2 [ 7.753358] [0:mm-qcamera-daem: 457] sec_chg_set_property : led_mode = 0 [ 7.753372] [0:mm-qcamera-daem: 457] sec_chg_set_property : input current psy_soc = !NULL [ 7.753783] [0:mm-qcamera-daem: 457] sm5703_get_charging_status chg_status3 = 3 [ 7.754200] [0:mm-qcamera-daem: 457] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 7.760519] [0:mm-qcamera-daem: 457] sm5703-fuelgauge 10-0071: sm5703_get_ocv: read = 0x3e7, ocv = 3902 [ 7.760542] [0:mm-qcamera-daem: 457] sec_chg_set_property : soc_val.intval = 3902, ldo1 = 8, val->intval = 5 [ 7.761554] [3: kworker/u8:6: 635] 0xCC=0x0c40, 0xCD=0x10e2, 0xCE=0x1497, 0xCF=0x149c [ 7.761727] [0:mm-qcamera-daem: 457] sm5703_set_input_current_limit : SM5703_VBUSCNTL (Input current limit) : 0x08 [ 7.761743] [0:mm-qcamera-daem: 457] sec_chg_set_property : input current (500mA) [ 7.761758] [0:mm-qcamera-daem: 457] CAM_SENSOR_A2.8V sm5703_regulator_enable input current [ 7.761770] [0:mm-qcamera-daem: 457] sm5703-regulator CAM_SENSOR_A2.8V sm5703_regulator_enable ret (0)<6>[ 7.763496] [3: kworker/u8:6: 635] 0x85=0x809c, 0x86=0x00a9, 0x87=0x17fe, 0x28=0x09c8 [ 7.763524] [3: kworker/u8:6: 635] sec-battery battery.83: sec_bat_get_battery_info:Vnow(3882mV),Inow(-128mA),Imax(500mA),SOC(58%),Tbat(237),Tchg(0),is_hc_usb(0) [ 7.780696] [0: insthk: 645] QSEECOM: qseecom_load_app: App with id 4 (sshdcpap) now loaded [ 7.786499] [3: kworker/u8:6: 635] sec-battery battery.83: sec_bat_battery_cable_check: Battery Connected [ 7.786949] [3: kworker/u8:6: 635] sm5703_get_charging_health : charger->is_charging = 1, charger->cable_type = 4, is_current_reduced = 0 [ 7.786965] [3: kworker/u8:6: 635] sm5703_get_charging_health : vbus_status = 32 [ 7.786980] [3: kworker/u8:6: 635] sm5703_get_charging_health : Health : 1 [ 7.787001] [3: kworker/u8:6: 635] sec-battery battery.83: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%) [ 7.787083] [3: kworker/3:1: 32] sec_chg_get_property: slow-charging mode [ 7.788572] [3: healthd: 335] sec_chg_get_property: slow-charging mode [ 7.788808] [3: healthd: 335] healthd: battery l=58 v=3882 t=23.7 h=2 st=2 c=0 o=4 ca=39 ct=2 ps=0 hv=0 chg=u 2017-02-02 20:38:29.988502864 UTC [ 7.788836] [3: healthd: 335] healthd-android: healthd_mode_android_battery_update [ 7.788861] [3: healthd: 335] BatteryPropertiesRegistrar: notifyListeners : start [ 7.788887] [3: healthd: 335] BatteryPropertiesRegistrar: notifyListeners : done [ 7.790380] [1:mm-qcamera-daem: 457] sm5703-regulator CAM_SENSOR_CORE_1.2V sm5703_regulator_is_enabled ret (0) [ 7.790398] [1:mm-qcamera-daem: 457] sm5703-regulator Enable regulator CAM_SENSOR_CORE_1.2V [ 7.790414] [1:mm-qcamera-daem: 457] sm5703_regulator_enable desc.id = 5 [ 7.802048] I[0: getprop: 698] android_usb gadget: high-speed config #1: 86000c8.android_usb [ 7.802115] I[0: getprop: 698] usb: SET_CON [ 7.802131] I[0: getprop: 698] usb: set_config_number single config num=0 [ 7.825541] [3: cs: 644] QSEECOM: qseecom_load_app: App (skm) does'nt exist, loading apps for first time [ 7.791175] [1:mm-qcamera-daem: 457] sm5703-regulator CAM_SENSOR_CORE_1.2V sm5703_regulator_enable ret (0) [ 7.840341] [1:mm-qcamera-daem: 457] msm_cci_init:761: hw_version = 0x10000008 [ 7.840588] [1:mm-qcamera-daem: 457] s5k3l2xx probe succeeded [ 7.840949] [1:mm-qcamera-daem: 457] sensor_subdev_id = -1 i = 0 [ 7.840964] [1:mm-qcamera-daem: 457] sensor_subdev_id = -1 i = 1 [ 7.840977] [1:mm-qcamera-daem: 457] sensor_subdev_id = 0 i = 2 [ 7.840989] [1:mm-qcamera-daem: 457] sensor_subdev_id = 1 i = 3 [ 7.841004] [1:mm-qcamera-daem: 457] sensor_subdev_id = 1 i = 4 [ 7.841022] [1:mm-qcamera-daem: 457] sensor_subdev_id = -1 i = 5 [ 7.841040] [1:mm-qcamera-daem: 457] sensor_subdev_id = 0 i = 6 [ 7.841055] [1:mm-qcamera-daem: 457] sensor_subdev_id = -1 i = 7 [ 7.841070] [1:mm-qcamera-daem: 457] sensor_subdev_id = 0 i = 8 [ 7.841084] [1:mm-qcamera-daem: 457] sensor_subdev_id = -1 i = 9 [ 7.847852] [3: cs: 644] QSEECOM: qseecom_load_app: App with id 5 (skm) now loaded [ 7.848145] [0: insthk: 645] QSEECOM: qseecom_unload_app: App id 4 now unloaded [ 7.849479] [1:mm-qcamera-daem: 457] sm5703-regulator Disable regulator CAM_SENSOR_CORE_1.2V [ 7.849498] [1:mm-qcamera-daem: 457] sm5703_regulator_disable desc.id = 5 [ 7.850425] [1:mm-qcamera-daem: 457] sm5703-regulator sm5703_regulator_disable ret (0) [ 7.850491] [1:mm-qcamera-daem: 457] sm5703-regulator Disable regulator CAM_SENSOR_A2.8V [ 7.850505] [1:mm-qcamera-daem: 457] sm5703_regulator_disable desc.id = 2 [ 7.852035] [1:mm-qcamera-daem: 457] sec_chg_set_property : led_mode = 0 [ 7.852051] [1:mm-qcamera-daem: 457] sec_chg_set_property : input current psy_soc = !NULL [ 7.852486] [1:mm-qcamera-daem: 457] sm5703_get_charging_status chg_status3 = 3 [ 7.852919] [1:mm-qcamera-daem: 457] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 7.853433] [1:mm-qcamera-daem: 457] sm5703-fuelgauge 10-0071: sm5703_get_ocv: read = 0x3e7, ocv = 3902 [ 7.853449] [1:mm-qcamera-daem: 457] sec_chg_set_property : soc_val.intval = 3902, ldo1 = 0, val->intval = 6 [ 7.854915] [1:mm-qcamera-daem: 457] sm5703_set_input_current_limit : SM5703_VBUSCNTL (Input current limit) : 0x08 [ 7.854933] [1:mm-qcamera-daem: 457] sec_chg_set_property : input current (500mA) [ 7.854947] [1:mm-qcamera-daem: 457] CAM_SENSOR_A2.8V sm5703_regulator_disable input current [ 7.854959] [1:mm-qcamera-daem: 457] sm5703-regulator sm5703_regulator_disable ret (0)<6>[ 7.859855] [0: kworker/0:0: 4] android_work: android_work: sent uevent USB_STATE=CONFIGURED [ 7.880320] [1:mm-qcamera-daem: 457] failed: no power_down_setting [ 7.880358] [1:mm-qcamera-daem: 457] msm_sensor_fill_actuator_subdevid_by_name:336 src_node NULL [ 7.880383] [1:mm-qcamera-daem: 457] MSM-SENSOR-INIT msm_sensor_remove_dev_node_for_eeprom:526 [CAM][Front] EEPROM node removed [ 7.880383] [1:mm-qcamera-daem: 457] [ 7.881451] [1:mm-qcamera-daem: 457] sm5703-regulator CAM_SENSOR_A2.8V sm5703_regulator_is_enabled ret (0) [ 7.881468] [1:mm-qcamera-daem: 457] sm5703-regulator Enable regulator CAM_SENSOR_A2.8V [ 7.881481] [1:mm-qcamera-daem: 457] sm5703_regulator_enable desc.id = 2 [ 7.883021] [1:mm-qcamera-daem: 457] sec_chg_set_property : led_mode = 0 [ 7.883037] [1:mm-qcamera-daem: 457] sec_chg_set_property : input current psy_soc = !NULL [ 7.883458] [1:mm-qcamera-daem: 457] sm5703_get_charging_status chg_status3 = 3 [ 7.883866] [1:mm-qcamera-daem: 457] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 7.884381] [1:mm-qcamera-daem: 457] sm5703-fuelgauge 10-0071: sm5703_get_ocv: read = 0x3e7, ocv = 3902 [ 7.884396] [1:mm-qcamera-daem: 457] sec_chg_set_property : soc_val.intval = 3902, ldo1 = 8, val->intval = 5 [ 7.885523] [1:mm-qcamera-daem: 457] sm5703_set_input_current_limit : SM5703_VBUSCNTL (Input current limit) : 0x08 [ 7.885537] [1:mm-qcamera-daem: 457] sec_chg_set_property : input current (500mA) [ 7.885551] [1:mm-qcamera-daem: 457] CAM_SENSOR_A2.8V sm5703_regulator_enable input current [ 7.885562] [1:mm-qcamera-daem: 457] sm5703-regulator CAM_SENSOR_A2.8V sm5703_regulator_enable ret (0)sm5703-regulator CAM_SENSOR_CORE_1.2V sm5703_regulator_is_enabled ret (0) [ 7.900315] [1:mm-qcamera-daem: 457] sm5703-regulator Enable regulator CAM_SENSOR_CORE_1.2V [ 7.900330] [1:mm-qcamera-daem: 457] sm5703_regulator_enable desc.id = 5 [ 7.912655] [1: mc_log: 730] MobiCore mcd: *** duplicated cmd!! [ 7.928960] [1:mm-qcamera-daem: 457] sm5703-regulator Disable regulator CAM_SENSOR_CORE_1.2V [ 7.928978] [1:mm-qcamera-daem: 457] sm5703_regulator_disable desc.id = 5 [ 7.929765] [1:mm-qcamera-daem: 457] sm5703-regulator sm5703_regulator_disable ret (0) [ 7.929820] [1:mm-qcamera-daem: 457] sm5703-regulator Disable regulator CAM_SENSOR_A2.8V [ 7.929834] [1:mm-qcamera-daem: 457] sm5703_regulator_disable desc.id = 2 [ 7.931348] [1:mm-qcamera-daem: 457] sec_chg_set_property : led_mode = 0 [ 7.931363] [1:mm-qcamera-daem: 457] sec_chg_set_property : input current psy_soc = !NULL [ 7.931777] [1:mm-qcamera-daem: 457] sm5703_get_charging_status chg_status3 = 3 [ 7.932183] [1:mm-qcamera-daem: 457] sm5703_get_charging_status charger->full_charged = 0, charger->cable_type = 4 [ 7.932685] [1:mm-qcamera-daem: 457] sm5703-fuelgauge 10-0071: sm5703_get_ocv: read = 0x3e7, ocv = 3902 [ 7.932701] [1:mm-qcamera-daem: 457] sec_chg_set_property : soc_val.intval = 3902, ldo1 = 0, val->intval = 6 [ 7.933805] [1:mm-qcamera-daem: 457] sm5703_set_input_current_limit : SM5703_VBUSCNTL (Input current limit) : 0x08 [ 7.933819] [1:mm-qcamera-daem: 457] sec_chg_set_property : input current (500mA) [ 7.933832] [1:mm-qcamera-daem: 457] CAM_SENSOR_A2.8V sm5703_regulator_disable input current [ 7.933844] [1:mm-qcamera-daem: 457] sm5703-regulator sm5703_regulator_disable ret (0)init: cannot find '/system/bin/ipacm-diag', disabling 'ipacm-diag' [ 8.030358] [1: mc_log: 730] MobiCore mcd: 301|t-base-QC-MSM8916-Android-301C-V002-110_110 [ 8.030381] [1: mc_log: 730] MobiCore mcd: 301|[