# Color temperature to set for day and night [default: 6500-4500] # The neutral temperature is 6500K. Using this value will not change the color # temperature of the display. Setting the color temperature to a value higher # than this results in more blue light, and setting a lower value will result # in more red light. #temperature = 5000 #(day=night=5000) #temperature = "6500-4500" #(day=6500, night=4500) temperature = "4600-3600" # Additional gamma correction to apply for day and night [default: 1.0] # # Either set it for all colors, or each color channel individually #gamma = 0.9 #(day=night=0.9) #gamma = "1.0 - 0.8:0.9:0.9" #(day=1.0, night=(R=0.8, G=0.9, B=0.9)) gamma = "0.9:0.9:0.9 - 0.85:0.9:0.9" # Screen brightness to apply for day and night [default: 1.0] # # It is a fake brightness adjustment obtained by manipulating the gamma ramps # which means that it does not reduce the backlight of the screen #brightness = 1.0 #(day=night=0.8) #brightness = "1.0-0.8" #(day=1.0, night=0.8) # Transition scheme [default: 3:-6] # # Either time ranges or elevation angles. By default, Reddish Shift will use # the current elevation of the sun to determine whether it is daytime, night # or in transition (dawn/dusk). You can also use the print command to see solar # elevation angles for the next 24 hours #scheme = "6:00-7:45 - 18:35-20:15" #(dawn=6:00-7:45, dusk=18:35-20:15) #scheme = "7:45 - 18:35" #(day starts at 7:45, night starts at 20:15) #scheme = "3:-6" #(above 3° is day, bellow -6° is night) # Location, used for computation of current solar elevation [default: 0:0] # # It is not needed when using manual time ranges for transition scheme Either # set latitude and longitude manually or select a location provider. Negative # values represent west and south, respectively. #location = "51.48:0.0" #(Greenwich) #location = "geoclue2" #(Currently not available) # Adjustment method to use to apply color settings # # If not set, the first available method will be used #method = "dummy" #(does not affect the display) # XVidMode extension #method = "vidmode" #(apply to $DISPLAY) #method = "vidmode:0" #(apply to screen 0) # XRANDR extension #method = "randr" #(apply to $DISPLAY) #method = "randr:0" #(apply to screen 0) #method = "randr$DISPLAY:62,63" #(apply to $DISPLAY with crtcs 62 and 63) # Direct Rendering Manager #method = "drm" #(apply to /dev/dri/card0) #method = "drm:1" #(apply to /dev/dri/card1) #method = "drm:0:80" #(apply to /dev/dri/card0 with crtc 80) # Windows graphics device interface: #method = "win32gdi" #(apply to current display) # Reset existing gamma ramps before applying new color settings #reset-ramps = false # Disable fading between color temperatures # # It will cause an immediate change between screen temperatures. by default, # the new screen temperature are gradually applied over a # couple of seconds #disable-fade = false # Duration of sleep between screen updates in milliseconds #sleep-duration = 5000 # Duration of sleep between screen updates for fade in milliseconds #sleep-duration_short = 100