#compdef rg ## # zsh completion function for ripgrep # # Run ci/test-complete after building to ensure that the options supported by # this function stay in synch with the `rg` binary. # # For convenience, a completion reference guide is included at the bottom of # this file. # # Originally based on code from the zsh-users project — see copyright notice # below. _rg() { local curcontext=$curcontext no='!' descr ret=1 local -a context line state state_descr args tmp suf local -A opt_args # ripgrep has many options which negate the effect of a more common one — for # example, `--no-column` to negate `--column`, and `--messages` to negate # `--no-messages`. There are so many of these, and they're so infrequently # used, that some users will probably find it irritating if they're completed # indiscriminately, so let's not do that unless either the current prefix # matches one of those negation options or the user has the `complete-all` # style set. Note that this prefix check has to be updated manually to account # for all of the potential negation options listed below! if # We also want to list all of these options during testing [[ $_RG_COMPLETE_LIST_ARGS == (1|t*|y*) ]] || # (--[imnp]* => --ignore*, --messages, --no-*, --pcre2-unicode) [[ $PREFIX$SUFFIX == --[imnp]* ]] || zstyle -t ":completion:${curcontext}:" complete-all then no= fi # We make heavy use of argument groups here to prevent the option specs from # growing unwieldy. These aren't supported in zsh <5.4, though, so we'll strip # them out below if necessary. This makes the exclusions inaccurate on those # older versions, but oh well — it's not that big a deal args=( + '(exclusive)' # Misc. fully exclusive options '(: * -)'{-h,--help}'[display help information]' '(: * -)'{-V,--version}'[display version information]' '(: * -)'--pcre2-version'[print the version of PCRE2 used by ripgrep, if available]' + '(buffered)' # buffering options '--line-buffered[force line buffering]' $no"--no-line-buffered[don't force line buffering]" '--block-buffered[force block buffering]' $no"--no-block-buffered[don't force block buffering]" + '(case)' # Case-sensitivity options {-i,--ignore-case}'[search case-insensitively]' {-s,--case-sensitive}'[search case-sensitively]' {-S,--smart-case}'[search case-insensitively if pattern is all lowercase]' + '(context-a)' # Context (after) options '(context-c)'{-A+,--after-context=}'[specify lines to show after each match]:number of lines' + '(context-b)' # Context (before) options '(context-c)'{-B+,--before-context=}'[specify lines to show before each match]:number of lines' + '(context-c)' # Context (combined) options '(context-a context-b)'{-C+,--context=}'[specify lines to show before and after each match]:number of lines' + '(column)' # Column options '--column[show column numbers for matches]' $no"--no-column[don't show column numbers for matches]" + '(count)' # Counting options {-c,--count}'[only show count of matching lines for each file]' '--count-matches[only show count of individual matches for each file]' '--include-zero[include files with zero matches in summary]' $no"--no-include-zero[don't include files with zero matches in summary]" + '(encoding)' # Encoding options {-E+,--encoding=}'[specify text encoding of files to search]: :_rg_encodings' $no'--no-encoding[use default text encoding]' + '(engine)' # Engine choice options '--engine=[select which regex engine to use]:when:(( default\:"use default engine" pcre2\:"identical to --pcre2" auto\:"identical to --auto-hybrid-regex" ))' + file # File-input options '(1)*'{-f+,--file=}'[specify file containing patterns to search for]: :_files' + '(file-match)' # Files with/without match options '(stats)'{-l,--files-with-matches}'[only show names of files with matches]' '(stats)--files-without-match[only show names of files without matches]' + '(file-name)' # File-name options {-H,--with-filename}'[show file name for matches]' {-I,--no-filename}"[don't show file name for matches]" + '(file-system)' # File system options "--one-file-system[don't descend into directories on other file systems]" $no'--no-one-file-system[descend into directories on other file systems]' + '(fixed)' # Fixed-string options {-F,--fixed-strings}'[treat pattern as literal string instead of regular expression]' $no"--no-fixed-strings[don't treat pattern as literal string]" + '(follow)' # Symlink-following options {-L,--follow}'[follow symlinks]' $no"--no-follow[don't follow symlinks]" + '(generate)' # Options for generating ancillary data '--generate=[generate man page or completion scripts]:when:(( man\:"man page" complete-bash\:"shell completions for bash" complete-zsh\:"shell completions for zsh" complete-fish\:"shell completions for fish" complete-powershell\:"shell completions for PowerShell" ))' + glob # File-glob options '*'{-g+,--glob=}'[include/exclude files matching specified glob]:glob' '*--iglob=[include/exclude files matching specified case-insensitive glob]:glob' + '(glob-case-insensitive)' # File-glob case sensitivity options '--glob-case-insensitive[treat -g/--glob patterns case insensitively]' $no'--no-glob-case-insensitive[treat -g/--glob patterns case sensitively]' + '(heading)' # Heading options '(pretty-vimgrep)--heading[show matches grouped by file name]' "(pretty-vimgrep)--no-heading[don't show matches grouped by file name]" + '(hidden)' # Hidden-file options {-.,--hidden}'[search hidden files and directories]' $no"--no-hidden[don't search hidden files and directories]" + '(hybrid)' # hybrid regex options '--auto-hybrid-regex[DEPRECATED: dynamically use PCRE2 if necessary]' $no"--no-auto-hybrid-regex[DEPRECATED: don't dynamically use PCRE2 if necessary]" + '(ignore)' # Ignore-file options "(--no-ignore-global --no-ignore-parent --no-ignore-vcs --no-ignore-dot)--no-ignore[don't respect ignore files]" $no'(--ignore-global --ignore-parent --ignore-vcs --ignore-dot)--ignore[respect ignore files]' + '(ignore-file-case-insensitive)' # Ignore-file case sensitivity options '--ignore-file-case-insensitive[process ignore files case insensitively]' $no'--no-ignore-file-case-insensitive[process ignore files case sensitively]' + '(ignore-exclude)' # Local exclude (ignore)-file options "--no-ignore-exclude[don't respect local exclude (ignore) files]" $no'--ignore-exclude[respect local exclude (ignore) files]' + '(ignore-global)' # Global ignore-file options "--no-ignore-global[don't respect global ignore files]" $no'--ignore-global[respect global ignore files]' + '(ignore-parent)' # Parent ignore-file options "--no-ignore-parent[don't respect ignore files in parent directories]" $no'--ignore-parent[respect ignore files in parent directories]' + '(ignore-vcs)' # VCS ignore-file options "--no-ignore-vcs[don't respect version control ignore files]" $no'--ignore-vcs[respect version control ignore files]' + '(require-git)' # git specific settings "--no-require-git[don't require git repository to respect gitignore rules]" $no'--require-git[require git repository to respect gitignore rules]' + '(ignore-dot)' # .ignore options "--no-ignore-dot[don't respect .ignore files]" $no'--ignore-dot[respect .ignore files]' + '(ignore-files)' # custom global ignore file options "--no-ignore-files[don't respect --ignore-file flags]" $no'--ignore-files[respect --ignore-file files]' + '(json)' # JSON options '--json[output results in JSON Lines format]' $no"--no-json[don't output results in JSON Lines format]" + '(line-number)' # Line-number options {-n,--line-number}'[show line numbers for matches]' {-N,--no-line-number}"[don't show line numbers for matches]" + '(line-terminator)' # Line-terminator options '--crlf[use CRLF as line terminator]' $no"--no-crlf[don't use CRLF as line terminator]" '(text)--null-data[use NUL as line terminator]' + '(max-columns-preview)' # max column preview options '--max-columns-preview[show preview for long lines (with -M)]' $no"--no-max-columns-preview[don't show preview for long lines (with -M)]" + '(max-depth)' # Directory-depth options {-d,--max-depth}'[specify max number of directories to descend]:number of directories' '--maxdepth=[alias for --max-depth]:number of directories' '!--maxdepth=:number of directories' + '(messages)' # Error-message options '(--no-ignore-messages)--no-messages[suppress some error messages]' $no"--messages[don't suppress error messages affected by --no-messages]" + '(messages-ignore)' # Ignore-error message options "--no-ignore-messages[don't show ignore-file parse error messages]" $no'--ignore-messages[show ignore-file parse error messages]' + '(mmap)' # mmap options '--mmap[search using memory maps when possible]' "--no-mmap[don't search using memory maps]" + '(multiline)' # Multiline options {-U,--multiline}'[permit matching across multiple lines]' $no'(multiline-dotall)--no-multiline[restrict matches to at most one line each]' + '(multiline-dotall)' # Multiline DOTALL options '(--no-multiline)--multiline-dotall[allow "." to match newline (with -U)]' $no"(--no-multiline)--no-multiline-dotall[don't allow \".\" to match newline (with -U)]" + '(only)' # Only-match options {-o,--only-matching}'[show only matching part of each line]' + '(passthru)' # Pass-through options '(--vimgrep)--passthru[show both matching and non-matching lines]' '(--vimgrep)--passthrough[alias for --passthru]' + '(pcre2)' # PCRE2 options {-P,--pcre2}'[enable matching with PCRE2]' $no'(pcre2-unicode)--no-pcre2[disable matching with PCRE2]' + '(pcre2-unicode)' # PCRE2 Unicode options $no'(--no-pcre2 --no-pcre2-unicode)--pcre2-unicode[DEPRECATED: enable PCRE2 Unicode mode (with -P)]' '(--no-pcre2 --pcre2-unicode)--no-pcre2-unicode[DEPRECATED: disable PCRE2 Unicode mode (with -P)]' + '(pre)' # Preprocessing options '(-z --search-zip)--pre=[specify preprocessor utility]:preprocessor utility:_command_names -e' $no'--no-pre[disable preprocessor utility]' + pre-glob # Preprocessing glob options '*--pre-glob[include/exclude files for preprocessing with --pre]' + '(pretty-vimgrep)' # Pretty/vimgrep display options '(heading)'{-p,--pretty}'[alias for --color=always --heading -n]' '(heading passthru)--vimgrep[show results in vim-compatible format]' + regexp # Explicit pattern options '(1 file)*'{-e+,--regexp=}'[specify pattern]:pattern' + '(replace)' # Replacement options {-r+,--replace=}'[specify string used to replace matches]:replace string' + '(sort)' # File-sorting options '(threads)--sort=[sort results in ascending order (disables parallelism)]:sort method:(( none\:"no sorting" path\:"sort by file path" modified\:"sort by last modified time" accessed\:"sort by last accessed time" created\:"sort by creation time" ))' '(threads)--sortr=[sort results in descending order (disables parallelism)]:sort method:(( none\:"no sorting" path\:"sort by file path" modified\:"sort by last modified time" accessed\:"sort by last accessed time" created\:"sort by creation time" ))' '(threads)--sort-files[DEPRECATED: sort results by file path (disables parallelism)]' $no"--no-sort-files[DEPRECATED: do not sort results]" + '(stats)' # Statistics options '(--files file-match)--stats[show search statistics]' $no"--no-stats[don't show search statistics]" + '(text)' # Binary-search options {-a,--text}'[search binary files as if they were text]' "--binary[search binary files, don't print binary data]" $no"--no-binary[don't search binary files]" $no"(--null-data)--no-text[don't search binary files as if they were text]" + '(threads)' # Thread-count options '(sort)'{-j+,--threads=}'[specify approximate number of threads to use]:number of threads' + '(trim)' # Trim options '--trim[trim any ASCII whitespace prefix from each line]' $no"--no-trim[don't trim ASCII whitespace prefix from each line]" + type # Type options '*'{-t+,--type=}'[only search files matching specified type]: :_rg_types' '*--type-add=[add new glob for specified file type]: :->typespec' '*--type-clear=[clear globs previously defined for specified file type]: :_rg_types' # This should actually be exclusive with everything but other type options '(: *)--type-list[show all supported file types and their associated globs]' '*'{-T+,--type-not=}"[don't search files matching specified file type]: :_rg_types" + '(word-line)' # Whole-word/line match options {-w,--word-regexp}'[only show matches surrounded by word boundaries]' {-x,--line-regexp}'[only show matches surrounded by line boundaries]' + '(unicode)' # Unicode options $no'--unicode[enable Unicode mode]' '--no-unicode[disable Unicode mode]' + '(zip)' # Compression options '(--pre)'{-z,--search-zip}'[search in compressed files]' $no"--no-search-zip[don't search in compressed files]" + misc # Other options — no need to separate these at the moment '(-b --byte-offset)'{-b,--byte-offset}'[show 0-based byte offset for each matching line]' $no"--no-byte-offset[don't show byte offsets for each matching line]" '--color=[specify when to use colors in output]:when:(( never\:"never use colors" auto\:"use colors or not based on stdout, TERM, etc." always\:"always use colors" ansi\:"always use ANSI colors (even on Windows)" ))' '*--colors=[specify color and style settings]: :->colorspec' '--context-separator=[specify string used to separate non-continuous context lines in output]:separator' $no"--no-context-separator[don't print context separators]" '--debug[show debug messages]' '--field-context-separator[set string to delimit fields in context lines]' '--field-match-separator[set string to delimit fields in matching lines]' '--hostname-bin=[executable for getting system hostname]:hostname executable:_command_names -e' '--hyperlink-format=[specify pattern for hyperlinks]:pattern' '--trace[show more verbose debug messages]' '--dfa-size-limit=[specify upper size limit of generated DFA]:DFA size (bytes)' "(1 stats)--files[show each file that would be searched (but don't search)]" '*--ignore-file=[specify additional ignore file]:ignore file:_files' '(-v --invert-match)'{-v,--invert-match}'[invert matching]' $no"--no-invert-match[do not invert matching]" '(-M --max-columns)'{-M+,--max-columns=}'[specify max length of lines to print]:number of bytes' '(-m --max-count)'{-m+,--max-count=}'[specify max number of matches per file]:number of matches' '--max-filesize=[specify size above which files should be ignored]:file size (bytes)' "--no-config[don't load configuration files]" '(-0 --null)'{-0,--null}'[print NUL byte after file names]' '--path-separator=[specify path separator to use when printing file names]:separator' '(-q --quiet)'{-q,--quiet}'[suppress normal output]' '--regex-size-limit=[specify upper size limit of compiled regex]:regex size (bytes)' '*'{-u,--unrestricted}'[reduce level of "smart" searching]' '--stop-on-nonmatch[stop on first non-matching line after a matching one]' + operand # Operands '(--files --type-list file regexp)1: :_guard "^-*" pattern' '(--type-list)*: :_files' ) # This is used with test-complete to verify that there are no options # listed in the help output that aren't also defined here [[ $_RG_COMPLETE_LIST_ARGS == (1|t*|y*) ]] && { print -rl - $args return 0 } # Strip out argument groups where unsupported (see above) [[ $ZSH_VERSION == (4|5.<0-3>)(.*)# ]] && args=( ${(@)args:#(#i)(+|[a-z0-9][a-z0-9_-]#|\([a-z0-9][a-z0-9_-]#\))} ) _arguments -C -s -S : $args && ret=0 case $state in colorspec) if [[ ${IPREFIX#--*=}$PREFIX == [^:]# ]]; then suf=( -qS: ) tmp=( 'column:specify coloring for column numbers' 'line:specify coloring for line numbers' 'match:specify coloring for match text' 'path:specify coloring for file names' ) descr='color/style type' elif [[ ${IPREFIX#--*=}$PREFIX == (column|line|match|path):[^:]# ]]; then suf=( -qS: ) tmp=( 'none:clear color/style for type' 'bg:specify background color' 'fg:specify foreground color' 'style:specify text style' ) descr='color/style attribute' elif [[ ${IPREFIX#--*=}$PREFIX == [^:]##:(bg|fg):[^:]# ]]; then tmp=( black blue green red cyan magenta yellow white ) descr='color name or r,g,b' elif [[ ${IPREFIX#--*=}$PREFIX == [^:]##:style:[^:]# ]]; then tmp=( {,no}bold {,no}intense {,no}underline ) descr='style name' else _message -e colorspec 'no more arguments' fi (( $#tmp )) && { compset -P '*:' _describe -t colorspec $descr tmp $suf && ret=0 } ;; typespec) if compset -P '[^:]##:include:'; then _sequence -s , _rg_types && ret=0 # @todo This bit in particular could be better, but it's a little # complex, and attempting to solve it seems to run us up against a crash # bug — zsh # 40362 elif compset -P '[^:]##:'; then _message 'glob or include directive' && ret=1 elif [[ ! -prefix *:* ]]; then _rg_types -qS : && ret=0 fi ;; esac return ret } # Complete encodings _rg_encodings() { local -a expl local -aU _encodings _encodings=( !ENCODINGS! ) _wanted encodings expl encoding compadd -a "$@" - _encodings } # Complete file types _rg_types() { local -a expl local -aU _types _types=( ${(@)${(f)"$( _call_program types $words[1] --type-list )"}//:[[:space:]]##/:} ) if zstyle -t ":completion:${curcontext}:types" extra-verbose; then _describe -t types 'file type' _types else _wanted types expl 'file type' compadd "$@" - ${(@)_types%%:*} fi } _rg "$@" ################################################################################ # ZSH COMPLETION REFERENCE # # For the convenience of developers who aren't especially familiar with zsh # completion functions, a brief reference guide follows. This is in no way # comprehensive; it covers just enough of the basic structure, syntax, and # conventions to help someone make simple changes like adding new options. For # more complete documentation regarding zsh completion functions, please see the # following: # # * http://zsh.sourceforge.net/Doc/Release/Completion-System.html # * https://github.com/zsh-users/zsh/blob/master/Etc/completion-style-guide # # OVERVIEW # # Most zsh completion functions are defined in terms of `_arguments`, which is a # shell function that takes a series of argument specifications. The specs for # `rg` are stored in an array, which is common for more complex functions; the # elements of the array are passed to `_arguments` on invocation. # # ARGUMENT-SPECIFICATION SYNTAX # # The following is a contrived example of the argument specs for a simple tool: # # '(: * -)'{-h,--help}'[display help information]' # '(-q -v --quiet --verbose)'{-q,--quiet}'[decrease output verbosity]' # '!(-q -v --quiet --verbose)--silent' # '(-q -v --quiet --verbose)'{-v,--verbose}'[increase output verbosity]' # '--color=[specify when to use colors]:when:(always never auto)' # '*:example file:_files' # # Although there may appear to be six specs here, there are actually nine; we # use brace expansion to combine specs for options that go by multiple names, # like `-q` and `--quiet`. This is customary, and ties in with the fact that zsh # merges completion possibilities together when they have the same description. # # The first line defines the option `-h`/`--help`. With most tools, it isn't # useful to complete anything after `--help` because it effectively overrides # all others; the `(: * -)` at the beginning of the spec tells zsh not to # complete any other operands (`:` and `*`) or options (`-`) after this one has # been used. The `[...]` at the end associates a description with `-h`/`--help`; # as mentioned, zsh will see the identical descriptions and merge these options # together when offering completion possibilities. # # The next line defines `-q`/`--quiet`. Here we don't want to suppress further # completions entirely, but we don't want to offer `-q` if `--quiet` has been # given (since they do the same thing), nor do we want to offer `-v` (since it # doesn't make sense to be quiet and verbose at the same time). We don't need to # tell zsh not to offer `--quiet` a second time, since that's the default # behaviour, but since this line expands to two specs describing `-q` *and* # `--quiet` we do need to explicitly list all of them here. # # The next line defines a hidden option `--silent` — maybe it's a deprecated # synonym for `--quiet`. The leading `!` indicates that zsh shouldn't offer this # option during completion. The benefit of providing a spec for an option that # shouldn't be completed is that, if someone *does* use it, we can correctly # suppress completion of other options afterwards. # # The next line defines `-v`/`--verbose`; this works just like `-q`/`--quiet`. # # The next line defines `--color`. In this example, `--color` doesn't have a # corresponding short option, so we don't need to use brace expansion. Further, # there are no other options it's exclusive with (just itself), so we don't need # to define those at the beginning. However, it does take a mandatory argument. # The `=` at the end of `--color=` indicates that the argument may appear either # like `--color always` or like `--color=always`; this is how most GNU-style # command-line tools work. The corresponding short option would normally use `+` # — for example, `-c+` would allow either `-c always` or `-calways`. For this # option, the arguments are known ahead of time, so we can simply list them in # parentheses at the end (`when` is used as the description for the argument). # # The last line defines an operand (a non-option argument). In this example, the # operand can be used any number of times (the leading `*`), and it should be a # file path, so we tell zsh to call the `_files` function to complete it. The # `example file` in the middle is the description to use for this operand; we # could use a space instead to accept the default provided by `_files`. # # GROUPING ARGUMENT SPECIFICATIONS # # Newer versions of zsh support grouping argument specs together. All specs # following a `+` and then a group name are considered to be members of the # named group. Grouping is useful mostly for organisational purposes; it makes # the relationship between different options more obvious, and makes it easier # to specify exclusions. # # We could rewrite our example above using grouping as follows: # # '(: * -)'{-h,--help}'[display help information]' # '--color=[specify when to use colors]:when:(always never auto)' # '*:example file:_files' # + '(verbosity)' # {-q,--quiet}'[decrease output verbosity]' # '!--silent' # {-v,--verbose}'[increase output verbosity]' # # Here we take advantage of a useful feature of spec grouping — when the group # name is surrounded by parentheses, as in `(verbosity)`, it tells zsh that all # of the options in that group are exclusive with each other. As a result, we # don't need to manually list out the exclusions at the beginning of each # option. # # Groups can also be referred to by name in other argument specs; for example: # # '(xyz)--aaa' '*: :_files' # + xyz --xxx --yyy --zzz # # Here we use the group name `xyz` to tell zsh that `--xxx`, `--yyy`, and # `--zzz` are not to be completed after `--aaa`. This makes the exclusion list # much more compact and reusable. # # CONVENTIONS # # zsh completion functions generally adhere to the following conventions: # # * Use two spaces for indentation # * Combine specs for options with different names using brace expansion # * In combined specs, list the short option first (as in `{-a,--text}`) # * Use `+` or `=` as described above for options that take arguments # * Provide a description for all options, option-arguments, and operands # * Capitalise/punctuate argument descriptions as phrases, not complete # sentences — 'display help information', never 'Display help information.' # (but still capitalise acronyms and proper names) # * Write argument descriptions as verb phrases — 'display x', 'enable y', # 'use z' # * Word descriptions to make it clear when an option expects an argument; # usually this is done with the word 'specify', as in 'specify x' or # 'use specified x') # * Write argument descriptions as tersely as possible — for example, articles # like 'a' and 'the' should be omitted unless it would be confusing # # Other conventions currently used by this function: # # * Order argument specs alphabetically by group name, then option name # * Group options that are directly related, mutually exclusive, or frequently # referenced by other argument specs # * Use only characters in the set [a-z0-9_-] in group names # * Order exclusion lists as follows: short options, long options, groups # * Use American English in descriptions # * Use 'don't' in descriptions instead of 'do not' # * Word descriptions for related options as similarly as possible. For example, # `--foo[enable foo]` and `--no-foo[disable foo]`, or `--foo[use foo]` and # `--no-foo[don't use foo]` # * Word descriptions to make it clear when an option only makes sense with # another option, usually by adding '(with -x)' to the end # * Don't quote strings or variables unnecessarily. When quotes are required, # prefer single-quotes to double-quotes # * Prefix option specs with `$no` when the option serves only to negate the # behaviour of another option that must be provided explicitly by the user. # This prevents rarely used options from cluttering up the completion menu ################################################################################ # ------------------------------------------------------------------------------ # Copyright (c) 2011 Github zsh-users - http://github.com/zsh-users # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are met: # * Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # * Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # * Neither the name of the zsh-users nor the # names of its contributors may be used to endorse or promote products # derived from this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED # WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE # DISCLAIMED. IN NO EVENT SHALL ZSH-USERS BE LIABLE FOR ANY # DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES # (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; # LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND # ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # ------------------------------------------------------------------------------ # Description # ----------- # # Completion script for ripgrep # # ------------------------------------------------------------------------------ # Authors # ------- # # * arcizan # * MaskRay # # ------------------------------------------------------------------------------ # Local Variables: # mode: shell-script # coding: utf-8-unix # indent-tabs-mode: nil # sh-indentation: 2 # sh-basic-offset: 2 # End: # vim: ft=zsh sw=2 ts=2 et