#[doc = "Register `WAKE_EN0` reader"]
pub type R = crate::R<WAKE_EN0_SPEC>;
#[doc = "Register `WAKE_EN0` writer"]
pub type W = crate::W<WAKE_EN0_SPEC>;
#[doc = "Field `clk_sys_clocks` reader - "]
pub type CLK_SYS_CLOCKS_R = crate::BitReader;
#[doc = "Field `clk_sys_clocks` writer - "]
pub type CLK_SYS_CLOCKS_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_adc_adc` reader - "]
pub type CLK_ADC_ADC_R = crate::BitReader;
#[doc = "Field `clk_adc_adc` writer - "]
pub type CLK_ADC_ADC_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_adc` reader - "]
pub type CLK_SYS_ADC_R = crate::BitReader;
#[doc = "Field `clk_sys_adc` writer - "]
pub type CLK_SYS_ADC_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_busctrl` reader - "]
pub type CLK_SYS_BUSCTRL_R = crate::BitReader;
#[doc = "Field `clk_sys_busctrl` writer - "]
pub type CLK_SYS_BUSCTRL_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_busfabric` reader - "]
pub type CLK_SYS_BUSFABRIC_R = crate::BitReader;
#[doc = "Field `clk_sys_busfabric` writer - "]
pub type CLK_SYS_BUSFABRIC_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_dma` reader - "]
pub type CLK_SYS_DMA_R = crate::BitReader;
#[doc = "Field `clk_sys_dma` writer - "]
pub type CLK_SYS_DMA_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_i2c0` reader - "]
pub type CLK_SYS_I2C0_R = crate::BitReader;
#[doc = "Field `clk_sys_i2c0` writer - "]
pub type CLK_SYS_I2C0_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_i2c1` reader - "]
pub type CLK_SYS_I2C1_R = crate::BitReader;
#[doc = "Field `clk_sys_i2c1` writer - "]
pub type CLK_SYS_I2C1_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_io` reader - "]
pub type CLK_SYS_IO_R = crate::BitReader;
#[doc = "Field `clk_sys_io` writer - "]
pub type CLK_SYS_IO_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_jtag` reader - "]
pub type CLK_SYS_JTAG_R = crate::BitReader;
#[doc = "Field `clk_sys_jtag` writer - "]
pub type CLK_SYS_JTAG_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_vreg_and_chip_reset` reader - "]
pub type CLK_SYS_VREG_AND_CHIP_RESET_R = crate::BitReader;
#[doc = "Field `clk_sys_vreg_and_chip_reset` writer - "]
pub type CLK_SYS_VREG_AND_CHIP_RESET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_pads` reader - "]
pub type CLK_SYS_PADS_R = crate::BitReader;
#[doc = "Field `clk_sys_pads` writer - "]
pub type CLK_SYS_PADS_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_pio0` reader - "]
pub type CLK_SYS_PIO0_R = crate::BitReader;
#[doc = "Field `clk_sys_pio0` writer - "]
pub type CLK_SYS_PIO0_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_pio1` reader - "]
pub type CLK_SYS_PIO1_R = crate::BitReader;
#[doc = "Field `clk_sys_pio1` writer - "]
pub type CLK_SYS_PIO1_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_pll_sys` reader - "]
pub type CLK_SYS_PLL_SYS_R = crate::BitReader;
#[doc = "Field `clk_sys_pll_sys` writer - "]
pub type CLK_SYS_PLL_SYS_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_pll_usb` reader - "]
pub type CLK_SYS_PLL_USB_R = crate::BitReader;
#[doc = "Field `clk_sys_pll_usb` writer - "]
pub type CLK_SYS_PLL_USB_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_psm` reader - "]
pub type CLK_SYS_PSM_R = crate::BitReader;
#[doc = "Field `clk_sys_psm` writer - "]
pub type CLK_SYS_PSM_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_pwm` reader - "]
pub type CLK_SYS_PWM_R = crate::BitReader;
#[doc = "Field `clk_sys_pwm` writer - "]
pub type CLK_SYS_PWM_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_resets` reader - "]
pub type CLK_SYS_RESETS_R = crate::BitReader;
#[doc = "Field `clk_sys_resets` writer - "]
pub type CLK_SYS_RESETS_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_rom` reader - "]
pub type CLK_SYS_ROM_R = crate::BitReader;
#[doc = "Field `clk_sys_rom` writer - "]
pub type CLK_SYS_ROM_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_rosc` reader - "]
pub type CLK_SYS_ROSC_R = crate::BitReader;
#[doc = "Field `clk_sys_rosc` writer - "]
pub type CLK_SYS_ROSC_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_rtc_rtc` reader - "]
pub type CLK_RTC_RTC_R = crate::BitReader;
#[doc = "Field `clk_rtc_rtc` writer - "]
pub type CLK_RTC_RTC_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_rtc` reader - "]
pub type CLK_SYS_RTC_R = crate::BitReader;
#[doc = "Field `clk_sys_rtc` writer - "]
pub type CLK_SYS_RTC_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_sio` reader - "]
pub type CLK_SYS_SIO_R = crate::BitReader;
#[doc = "Field `clk_sys_sio` writer - "]
pub type CLK_SYS_SIO_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_peri_spi0` reader - "]
pub type CLK_PERI_SPI0_R = crate::BitReader;
#[doc = "Field `clk_peri_spi0` writer - "]
pub type CLK_PERI_SPI0_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_spi0` reader - "]
pub type CLK_SYS_SPI0_R = crate::BitReader;
#[doc = "Field `clk_sys_spi0` writer - "]
pub type CLK_SYS_SPI0_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_peri_spi1` reader - "]
pub type CLK_PERI_SPI1_R = crate::BitReader;
#[doc = "Field `clk_peri_spi1` writer - "]
pub type CLK_PERI_SPI1_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_spi1` reader - "]
pub type CLK_SYS_SPI1_R = crate::BitReader;
#[doc = "Field `clk_sys_spi1` writer - "]
pub type CLK_SYS_SPI1_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_sram0` reader - "]
pub type CLK_SYS_SRAM0_R = crate::BitReader;
#[doc = "Field `clk_sys_sram0` writer - "]
pub type CLK_SYS_SRAM0_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_sram1` reader - "]
pub type CLK_SYS_SRAM1_R = crate::BitReader;
#[doc = "Field `clk_sys_sram1` writer - "]
pub type CLK_SYS_SRAM1_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_sram2` reader - "]
pub type CLK_SYS_SRAM2_R = crate::BitReader;
#[doc = "Field `clk_sys_sram2` writer - "]
pub type CLK_SYS_SRAM2_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `clk_sys_sram3` reader - "]
pub type CLK_SYS_SRAM3_R = crate::BitReader;
#[doc = "Field `clk_sys_sram3` writer - "]
pub type CLK_SYS_SRAM3_W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
    #[doc = "Bit 0"]
    #[inline(always)]
    pub fn clk_sys_clocks(&self) -> CLK_SYS_CLOCKS_R {
        CLK_SYS_CLOCKS_R::new((self.bits & 1) != 0)
    }
    #[doc = "Bit 1"]
    #[inline(always)]
    pub fn clk_adc_adc(&self) -> CLK_ADC_ADC_R {
        CLK_ADC_ADC_R::new(((self.bits >> 1) & 1) != 0)
    }
    #[doc = "Bit 2"]
    #[inline(always)]
    pub fn clk_sys_adc(&self) -> CLK_SYS_ADC_R {
        CLK_SYS_ADC_R::new(((self.bits >> 2) & 1) != 0)
    }
    #[doc = "Bit 3"]
    #[inline(always)]
    pub fn clk_sys_busctrl(&self) -> CLK_SYS_BUSCTRL_R {
        CLK_SYS_BUSCTRL_R::new(((self.bits >> 3) & 1) != 0)
    }
    #[doc = "Bit 4"]
    #[inline(always)]
    pub fn clk_sys_busfabric(&self) -> CLK_SYS_BUSFABRIC_R {
        CLK_SYS_BUSFABRIC_R::new(((self.bits >> 4) & 1) != 0)
    }
    #[doc = "Bit 5"]
    #[inline(always)]
    pub fn clk_sys_dma(&self) -> CLK_SYS_DMA_R {
        CLK_SYS_DMA_R::new(((self.bits >> 5) & 1) != 0)
    }
    #[doc = "Bit 6"]
    #[inline(always)]
    pub fn clk_sys_i2c0(&self) -> CLK_SYS_I2C0_R {
        CLK_SYS_I2C0_R::new(((self.bits >> 6) & 1) != 0)
    }
    #[doc = "Bit 7"]
    #[inline(always)]
    pub fn clk_sys_i2c1(&self) -> CLK_SYS_I2C1_R {
        CLK_SYS_I2C1_R::new(((self.bits >> 7) & 1) != 0)
    }
    #[doc = "Bit 8"]
    #[inline(always)]
    pub fn clk_sys_io(&self) -> CLK_SYS_IO_R {
        CLK_SYS_IO_R::new(((self.bits >> 8) & 1) != 0)
    }
    #[doc = "Bit 9"]
    #[inline(always)]
    pub fn clk_sys_jtag(&self) -> CLK_SYS_JTAG_R {
        CLK_SYS_JTAG_R::new(((self.bits >> 9) & 1) != 0)
    }
    #[doc = "Bit 10"]
    #[inline(always)]
    pub fn clk_sys_vreg_and_chip_reset(&self) -> CLK_SYS_VREG_AND_CHIP_RESET_R {
        CLK_SYS_VREG_AND_CHIP_RESET_R::new(((self.bits >> 10) & 1) != 0)
    }
    #[doc = "Bit 11"]
    #[inline(always)]
    pub fn clk_sys_pads(&self) -> CLK_SYS_PADS_R {
        CLK_SYS_PADS_R::new(((self.bits >> 11) & 1) != 0)
    }
    #[doc = "Bit 12"]
    #[inline(always)]
    pub fn clk_sys_pio0(&self) -> CLK_SYS_PIO0_R {
        CLK_SYS_PIO0_R::new(((self.bits >> 12) & 1) != 0)
    }
    #[doc = "Bit 13"]
    #[inline(always)]
    pub fn clk_sys_pio1(&self) -> CLK_SYS_PIO1_R {
        CLK_SYS_PIO1_R::new(((self.bits >> 13) & 1) != 0)
    }
    #[doc = "Bit 14"]
    #[inline(always)]
    pub fn clk_sys_pll_sys(&self) -> CLK_SYS_PLL_SYS_R {
        CLK_SYS_PLL_SYS_R::new(((self.bits >> 14) & 1) != 0)
    }
    #[doc = "Bit 15"]
    #[inline(always)]
    pub fn clk_sys_pll_usb(&self) -> CLK_SYS_PLL_USB_R {
        CLK_SYS_PLL_USB_R::new(((self.bits >> 15) & 1) != 0)
    }
    #[doc = "Bit 16"]
    #[inline(always)]
    pub fn clk_sys_psm(&self) -> CLK_SYS_PSM_R {
        CLK_SYS_PSM_R::new(((self.bits >> 16) & 1) != 0)
    }
    #[doc = "Bit 17"]
    #[inline(always)]
    pub fn clk_sys_pwm(&self) -> CLK_SYS_PWM_R {
        CLK_SYS_PWM_R::new(((self.bits >> 17) & 1) != 0)
    }
    #[doc = "Bit 18"]
    #[inline(always)]
    pub fn clk_sys_resets(&self) -> CLK_SYS_RESETS_R {
        CLK_SYS_RESETS_R::new(((self.bits >> 18) & 1) != 0)
    }
    #[doc = "Bit 19"]
    #[inline(always)]
    pub fn clk_sys_rom(&self) -> CLK_SYS_ROM_R {
        CLK_SYS_ROM_R::new(((self.bits >> 19) & 1) != 0)
    }
    #[doc = "Bit 20"]
    #[inline(always)]
    pub fn clk_sys_rosc(&self) -> CLK_SYS_ROSC_R {
        CLK_SYS_ROSC_R::new(((self.bits >> 20) & 1) != 0)
    }
    #[doc = "Bit 21"]
    #[inline(always)]
    pub fn clk_rtc_rtc(&self) -> CLK_RTC_RTC_R {
        CLK_RTC_RTC_R::new(((self.bits >> 21) & 1) != 0)
    }
    #[doc = "Bit 22"]
    #[inline(always)]
    pub fn clk_sys_rtc(&self) -> CLK_SYS_RTC_R {
        CLK_SYS_RTC_R::new(((self.bits >> 22) & 1) != 0)
    }
    #[doc = "Bit 23"]
    #[inline(always)]
    pub fn clk_sys_sio(&self) -> CLK_SYS_SIO_R {
        CLK_SYS_SIO_R::new(((self.bits >> 23) & 1) != 0)
    }
    #[doc = "Bit 24"]
    #[inline(always)]
    pub fn clk_peri_spi0(&self) -> CLK_PERI_SPI0_R {
        CLK_PERI_SPI0_R::new(((self.bits >> 24) & 1) != 0)
    }
    #[doc = "Bit 25"]
    #[inline(always)]
    pub fn clk_sys_spi0(&self) -> CLK_SYS_SPI0_R {
        CLK_SYS_SPI0_R::new(((self.bits >> 25) & 1) != 0)
    }
    #[doc = "Bit 26"]
    #[inline(always)]
    pub fn clk_peri_spi1(&self) -> CLK_PERI_SPI1_R {
        CLK_PERI_SPI1_R::new(((self.bits >> 26) & 1) != 0)
    }
    #[doc = "Bit 27"]
    #[inline(always)]
    pub fn clk_sys_spi1(&self) -> CLK_SYS_SPI1_R {
        CLK_SYS_SPI1_R::new(((self.bits >> 27) & 1) != 0)
    }
    #[doc = "Bit 28"]
    #[inline(always)]
    pub fn clk_sys_sram0(&self) -> CLK_SYS_SRAM0_R {
        CLK_SYS_SRAM0_R::new(((self.bits >> 28) & 1) != 0)
    }
    #[doc = "Bit 29"]
    #[inline(always)]
    pub fn clk_sys_sram1(&self) -> CLK_SYS_SRAM1_R {
        CLK_SYS_SRAM1_R::new(((self.bits >> 29) & 1) != 0)
    }
    #[doc = "Bit 30"]
    #[inline(always)]
    pub fn clk_sys_sram2(&self) -> CLK_SYS_SRAM2_R {
        CLK_SYS_SRAM2_R::new(((self.bits >> 30) & 1) != 0)
    }
    #[doc = "Bit 31"]
    #[inline(always)]
    pub fn clk_sys_sram3(&self) -> CLK_SYS_SRAM3_R {
        CLK_SYS_SRAM3_R::new(((self.bits >> 31) & 1) != 0)
    }
}
impl W {
    #[doc = "Bit 0"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_clocks(&mut self) -> CLK_SYS_CLOCKS_W<WAKE_EN0_SPEC> {
        CLK_SYS_CLOCKS_W::new(self, 0)
    }
    #[doc = "Bit 1"]
    #[inline(always)]
    #[must_use]
    pub fn clk_adc_adc(&mut self) -> CLK_ADC_ADC_W<WAKE_EN0_SPEC> {
        CLK_ADC_ADC_W::new(self, 1)
    }
    #[doc = "Bit 2"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_adc(&mut self) -> CLK_SYS_ADC_W<WAKE_EN0_SPEC> {
        CLK_SYS_ADC_W::new(self, 2)
    }
    #[doc = "Bit 3"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_busctrl(&mut self) -> CLK_SYS_BUSCTRL_W<WAKE_EN0_SPEC> {
        CLK_SYS_BUSCTRL_W::new(self, 3)
    }
    #[doc = "Bit 4"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_busfabric(&mut self) -> CLK_SYS_BUSFABRIC_W<WAKE_EN0_SPEC> {
        CLK_SYS_BUSFABRIC_W::new(self, 4)
    }
    #[doc = "Bit 5"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_dma(&mut self) -> CLK_SYS_DMA_W<WAKE_EN0_SPEC> {
        CLK_SYS_DMA_W::new(self, 5)
    }
    #[doc = "Bit 6"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_i2c0(&mut self) -> CLK_SYS_I2C0_W<WAKE_EN0_SPEC> {
        CLK_SYS_I2C0_W::new(self, 6)
    }
    #[doc = "Bit 7"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_i2c1(&mut self) -> CLK_SYS_I2C1_W<WAKE_EN0_SPEC> {
        CLK_SYS_I2C1_W::new(self, 7)
    }
    #[doc = "Bit 8"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_io(&mut self) -> CLK_SYS_IO_W<WAKE_EN0_SPEC> {
        CLK_SYS_IO_W::new(self, 8)
    }
    #[doc = "Bit 9"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_jtag(&mut self) -> CLK_SYS_JTAG_W<WAKE_EN0_SPEC> {
        CLK_SYS_JTAG_W::new(self, 9)
    }
    #[doc = "Bit 10"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_vreg_and_chip_reset(&mut self) -> CLK_SYS_VREG_AND_CHIP_RESET_W<WAKE_EN0_SPEC> {
        CLK_SYS_VREG_AND_CHIP_RESET_W::new(self, 10)
    }
    #[doc = "Bit 11"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_pads(&mut self) -> CLK_SYS_PADS_W<WAKE_EN0_SPEC> {
        CLK_SYS_PADS_W::new(self, 11)
    }
    #[doc = "Bit 12"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_pio0(&mut self) -> CLK_SYS_PIO0_W<WAKE_EN0_SPEC> {
        CLK_SYS_PIO0_W::new(self, 12)
    }
    #[doc = "Bit 13"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_pio1(&mut self) -> CLK_SYS_PIO1_W<WAKE_EN0_SPEC> {
        CLK_SYS_PIO1_W::new(self, 13)
    }
    #[doc = "Bit 14"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_pll_sys(&mut self) -> CLK_SYS_PLL_SYS_W<WAKE_EN0_SPEC> {
        CLK_SYS_PLL_SYS_W::new(self, 14)
    }
    #[doc = "Bit 15"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_pll_usb(&mut self) -> CLK_SYS_PLL_USB_W<WAKE_EN0_SPEC> {
        CLK_SYS_PLL_USB_W::new(self, 15)
    }
    #[doc = "Bit 16"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_psm(&mut self) -> CLK_SYS_PSM_W<WAKE_EN0_SPEC> {
        CLK_SYS_PSM_W::new(self, 16)
    }
    #[doc = "Bit 17"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_pwm(&mut self) -> CLK_SYS_PWM_W<WAKE_EN0_SPEC> {
        CLK_SYS_PWM_W::new(self, 17)
    }
    #[doc = "Bit 18"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_resets(&mut self) -> CLK_SYS_RESETS_W<WAKE_EN0_SPEC> {
        CLK_SYS_RESETS_W::new(self, 18)
    }
    #[doc = "Bit 19"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_rom(&mut self) -> CLK_SYS_ROM_W<WAKE_EN0_SPEC> {
        CLK_SYS_ROM_W::new(self, 19)
    }
    #[doc = "Bit 20"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_rosc(&mut self) -> CLK_SYS_ROSC_W<WAKE_EN0_SPEC> {
        CLK_SYS_ROSC_W::new(self, 20)
    }
    #[doc = "Bit 21"]
    #[inline(always)]
    #[must_use]
    pub fn clk_rtc_rtc(&mut self) -> CLK_RTC_RTC_W<WAKE_EN0_SPEC> {
        CLK_RTC_RTC_W::new(self, 21)
    }
    #[doc = "Bit 22"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_rtc(&mut self) -> CLK_SYS_RTC_W<WAKE_EN0_SPEC> {
        CLK_SYS_RTC_W::new(self, 22)
    }
    #[doc = "Bit 23"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_sio(&mut self) -> CLK_SYS_SIO_W<WAKE_EN0_SPEC> {
        CLK_SYS_SIO_W::new(self, 23)
    }
    #[doc = "Bit 24"]
    #[inline(always)]
    #[must_use]
    pub fn clk_peri_spi0(&mut self) -> CLK_PERI_SPI0_W<WAKE_EN0_SPEC> {
        CLK_PERI_SPI0_W::new(self, 24)
    }
    #[doc = "Bit 25"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_spi0(&mut self) -> CLK_SYS_SPI0_W<WAKE_EN0_SPEC> {
        CLK_SYS_SPI0_W::new(self, 25)
    }
    #[doc = "Bit 26"]
    #[inline(always)]
    #[must_use]
    pub fn clk_peri_spi1(&mut self) -> CLK_PERI_SPI1_W<WAKE_EN0_SPEC> {
        CLK_PERI_SPI1_W::new(self, 26)
    }
    #[doc = "Bit 27"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_spi1(&mut self) -> CLK_SYS_SPI1_W<WAKE_EN0_SPEC> {
        CLK_SYS_SPI1_W::new(self, 27)
    }
    #[doc = "Bit 28"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_sram0(&mut self) -> CLK_SYS_SRAM0_W<WAKE_EN0_SPEC> {
        CLK_SYS_SRAM0_W::new(self, 28)
    }
    #[doc = "Bit 29"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_sram1(&mut self) -> CLK_SYS_SRAM1_W<WAKE_EN0_SPEC> {
        CLK_SYS_SRAM1_W::new(self, 29)
    }
    #[doc = "Bit 30"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_sram2(&mut self) -> CLK_SYS_SRAM2_W<WAKE_EN0_SPEC> {
        CLK_SYS_SRAM2_W::new(self, 30)
    }
    #[doc = "Bit 31"]
    #[inline(always)]
    #[must_use]
    pub fn clk_sys_sram3(&mut self) -> CLK_SYS_SRAM3_W<WAKE_EN0_SPEC> {
        CLK_SYS_SRAM3_W::new(self, 31)
    }
    #[doc = r" Writes raw bits to the register."]
    #[doc = r""]
    #[doc = r" # Safety"]
    #[doc = r""]
    #[doc = r" Passing incorrect value can cause undefined behaviour. See reference manual"]
    #[inline(always)]
    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
        self.bits = bits;
        self
    }
}
#[doc = "enable clock in wake mode  

You can [`read`](crate::generic::Reg::read) this register and get [`wake_en0::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`wake_en0::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct WAKE_EN0_SPEC;
impl crate::RegisterSpec for WAKE_EN0_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [`wake_en0::R`](R) reader structure"]
impl crate::Readable for WAKE_EN0_SPEC {}
#[doc = "`write(|w| ..)` method takes [`wake_en0::W`](W) writer structure"]
impl crate::Writable for WAKE_EN0_SPEC {
    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
}
#[doc = "`reset()` method sets WAKE_EN0 to value 0xffff_ffff"]
impl crate::Resettable for WAKE_EN0_SPEC {
    const RESET_VALUE: u32 = 0xffff_ffff;
}