/* This is auto-generated file. See bpf_helpers_doc.py for details. */

/* Forward declarations of BPF structs */
struct bpf_fib_lookup;
struct bpf_sk_lookup;
struct bpf_perf_event_data;
struct bpf_perf_event_value;
struct bpf_pidns_info;
struct bpf_sock;
struct bpf_sock_addr;
struct bpf_sock_ops;
struct bpf_sock_tuple;
struct bpf_spin_lock;
struct bpf_sysctl;
struct bpf_tcp_sock;
struct bpf_tunnel_key;
struct bpf_xfrm_state;
struct pt_regs;
struct sk_reuseport_md;
struct sockaddr;
struct tcphdr;
struct seq_file;
struct tcp6_sock;
struct tcp_sock;
struct tcp_timewait_sock;
struct tcp_request_sock;
struct udp6_sock;
struct task_struct;
struct __sk_buff;
struct sk_msg_md;
struct xdp_md;

/*
 * bpf_map_lookup_elem
 *
 * 	Perform a lookup in *map* for an entry associated to *key*.
 *
 * Returns
 * 	Map value associated to *key*, or **NULL** if no entry was
 * 	found.
 */
static void *(*bpf_map_lookup_elem)(void *map, const void *key) = (void *) 1;

/*
 * bpf_map_update_elem
 *
 * 	Add or update the value of the entry associated to *key* in
 * 	*map* with *value*. *flags* is one of:
 *
 * 	**BPF_NOEXIST**
 * 		The entry for *key* must not exist in the map.
 * 	**BPF_EXIST**
 * 		The entry for *key* must already exist in the map.
 * 	**BPF_ANY**
 * 		No condition on the existence of the entry for *key*.
 *
 * 	Flag value **BPF_NOEXIST** cannot be used for maps of types
 * 	**BPF_MAP_TYPE_ARRAY** or **BPF_MAP_TYPE_PERCPU_ARRAY**  (all
 * 	elements always exist), the helper would return an error.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_map_update_elem)(void *map, const void *key, const void *value, __u64 flags) = (void *) 2;

/*
 * bpf_map_delete_elem
 *
 * 	Delete entry with *key* from *map*.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_map_delete_elem)(void *map, const void *key) = (void *) 3;

/*
 * bpf_probe_read
 *
 * 	For tracing programs, safely attempt to read *size* bytes from
 * 	kernel space address *unsafe_ptr* and store the data in *dst*.
 *
 * 	Generally, use **bpf_probe_read_user**\ () or
 * 	**bpf_probe_read_kernel**\ () instead.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_probe_read)(void *dst, __u32 size, const void *unsafe_ptr) = (void *) 4;

/*
 * bpf_ktime_get_ns
 *
 * 	Return the time elapsed since system boot, in nanoseconds.
 * 	Does not include time the system was suspended.
 * 	See: **clock_gettime**\ (**CLOCK_MONOTONIC**)
 *
 * Returns
 * 	Current *ktime*.
 */
static __u64 (*bpf_ktime_get_ns)(void) = (void *) 5;

/*
 * bpf_trace_printk
 *
 * 	This helper is a "printk()-like" facility for debugging. It
 * 	prints a message defined by format *fmt* (of size *fmt_size*)
 * 	to file *\/sys/kernel/debug/tracing/trace* from DebugFS, if
 * 	available. It can take up to three additional **u64**
 * 	arguments (as an eBPF helpers, the total number of arguments is
 * 	limited to five).
 *
 * 	Each time the helper is called, it appends a line to the trace.
 * 	Lines are discarded while *\/sys/kernel/debug/tracing/trace* is
 * 	open, use *\/sys/kernel/debug/tracing/trace_pipe* to avoid this.
 * 	The format of the trace is customizable, and the exact output
 * 	one will get depends on the options set in
 * 	*\/sys/kernel/debug/tracing/trace_options* (see also the
 * 	*README* file under the same directory). However, it usually
 * 	defaults to something like:
 *
 * 	::
 *
 * 		telnet-470   [001] .N.. 419421.045894: 0x00000001: <formatted msg>
 *
 * 	In the above:
 *
 * 		* ``telnet`` is the name of the current task.
 * 		* ``470`` is the PID of the current task.
 * 		* ``001`` is the CPU number on which the task is
 * 		  running.
 * 		* In ``.N..``, each character refers to a set of
 * 		  options (whether irqs are enabled, scheduling
 * 		  options, whether hard/softirqs are running, level of
 * 		  preempt_disabled respectively). **N** means that
 * 		  **TIF_NEED_RESCHED** and **PREEMPT_NEED_RESCHED**
 * 		  are set.
 * 		* ``419421.045894`` is a timestamp.
 * 		* ``0x00000001`` is a fake value used by BPF for the
 * 		  instruction pointer register.
 * 		* ``<formatted msg>`` is the message formatted with
 * 		  *fmt*.
 *
 * 	The conversion specifiers supported by *fmt* are similar, but
 * 	more limited than for printk(). They are **%d**, **%i**,
 * 	**%u**, **%x**, **%ld**, **%li**, **%lu**, **%lx**, **%lld**,
 * 	**%lli**, **%llu**, **%llx**, **%p**, **%s**. No modifier (size
 * 	of field, padding with zeroes, etc.) is available, and the
 * 	helper will return **-EINVAL** (but print nothing) if it
 * 	encounters an unknown specifier.
 *
 * 	Also, note that **bpf_trace_printk**\ () is slow, and should
 * 	only be used for debugging purposes. For this reason, a notice
 * 	bloc (spanning several lines) is printed to kernel logs and
 * 	states that the helper should not be used "for production use"
 * 	the first time this helper is used (or more precisely, when
 * 	**trace_printk**\ () buffers are allocated). For passing values
 * 	to user space, perf events should be preferred.
 *
 * Returns
 * 	The number of bytes written to the buffer, or a negative error
 * 	in case of failure.
 */
static long (*bpf_trace_printk)(const char *fmt, __u32 fmt_size, ...) = (void *) 6;

/*
 * bpf_get_prandom_u32
 *
 * 	Get a pseudo-random number.
 *
 * 	From a security point of view, this helper uses its own
 * 	pseudo-random internal state, and cannot be used to infer the
 * 	seed of other random functions in the kernel. However, it is
 * 	essential to note that the generator used by the helper is not
 * 	cryptographically secure.
 *
 * Returns
 * 	A random 32-bit unsigned value.
 */
static __u32 (*bpf_get_prandom_u32)(void) = (void *) 7;

/*
 * bpf_get_smp_processor_id
 *
 * 	Get the SMP (symmetric multiprocessing) processor id. Note that
 * 	all programs run with preemption disabled, which means that the
 * 	SMP processor id is stable during all the execution of the
 * 	program.
 *
 * Returns
 * 	The SMP id of the processor running the program.
 */
static __u32 (*bpf_get_smp_processor_id)(void) = (void *) 8;

/*
 * bpf_skb_store_bytes
 *
 * 	Store *len* bytes from address *from* into the packet
 * 	associated to *skb*, at *offset*. *flags* are a combination of
 * 	**BPF_F_RECOMPUTE_CSUM** (automatically recompute the
 * 	checksum for the packet after storing the bytes) and
 * 	**BPF_F_INVALIDATE_HASH** (set *skb*\ **->hash**, *skb*\
 * 	**->swhash** and *skb*\ **->l4hash** to 0).
 *
 * 	A call to this helper is susceptible to change the underlying
 * 	packet buffer. Therefore, at load time, all checks on pointers
 * 	previously done by the verifier are invalidated and must be
 * 	performed again, if the helper is used in combination with
 * 	direct packet access.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_skb_store_bytes)(struct __sk_buff *skb, __u32 offset, const void *from, __u32 len, __u64 flags) = (void *) 9;

/*
 * bpf_l3_csum_replace
 *
 * 	Recompute the layer 3 (e.g. IP) checksum for the packet
 * 	associated to *skb*. Computation is incremental, so the helper
 * 	must know the former value of the header field that was
 * 	modified (*from*), the new value of this field (*to*), and the
 * 	number of bytes (2 or 4) for this field, stored in *size*.
 * 	Alternatively, it is possible to store the difference between
 * 	the previous and the new values of the header field in *to*, by
 * 	setting *from* and *size* to 0. For both methods, *offset*
 * 	indicates the location of the IP checksum within the packet.
 *
 * 	This helper works in combination with **bpf_csum_diff**\ (),
 * 	which does not update the checksum in-place, but offers more
 * 	flexibility and can handle sizes larger than 2 or 4 for the
 * 	checksum to update.
 *
 * 	A call to this helper is susceptible to change the underlying
 * 	packet buffer. Therefore, at load time, all checks on pointers
 * 	previously done by the verifier are invalidated and must be
 * 	performed again, if the helper is used in combination with
 * 	direct packet access.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_l3_csum_replace)(struct __sk_buff *skb, __u32 offset, __u64 from, __u64 to, __u64 size) = (void *) 10;

/*
 * bpf_l4_csum_replace
 *
 * 	Recompute the layer 4 (e.g. TCP, UDP or ICMP) checksum for the
 * 	packet associated to *skb*. Computation is incremental, so the
 * 	helper must know the former value of the header field that was
 * 	modified (*from*), the new value of this field (*to*), and the
 * 	number of bytes (2 or 4) for this field, stored on the lowest
 * 	four bits of *flags*. Alternatively, it is possible to store
 * 	the difference between the previous and the new values of the
 * 	header field in *to*, by setting *from* and the four lowest
 * 	bits of *flags* to 0. For both methods, *offset* indicates the
 * 	location of the IP checksum within the packet. In addition to
 * 	the size of the field, *flags* can be added (bitwise OR) actual
 * 	flags. With **BPF_F_MARK_MANGLED_0**, a null checksum is left
 * 	untouched (unless **BPF_F_MARK_ENFORCE** is added as well), and
 * 	for updates resulting in a null checksum the value is set to
 * 	**CSUM_MANGLED_0** instead. Flag **BPF_F_PSEUDO_HDR** indicates
 * 	the checksum is to be computed against a pseudo-header.
 *
 * 	This helper works in combination with **bpf_csum_diff**\ (),
 * 	which does not update the checksum in-place, but offers more
 * 	flexibility and can handle sizes larger than 2 or 4 for the
 * 	checksum to update.
 *
 * 	A call to this helper is susceptible to change the underlying
 * 	packet buffer. Therefore, at load time, all checks on pointers
 * 	previously done by the verifier are invalidated and must be
 * 	performed again, if the helper is used in combination with
 * 	direct packet access.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_l4_csum_replace)(struct __sk_buff *skb, __u32 offset, __u64 from, __u64 to, __u64 flags) = (void *) 11;

/*
 * bpf_tail_call
 *
 * 	This special helper is used to trigger a "tail call", or in
 * 	other words, to jump into another eBPF program. The same stack
 * 	frame is used (but values on stack and in registers for the
 * 	caller are not accessible to the callee). This mechanism allows
 * 	for program chaining, either for raising the maximum number of
 * 	available eBPF instructions, or to execute given programs in
 * 	conditional blocks. For security reasons, there is an upper
 * 	limit to the number of successive tail calls that can be
 * 	performed.
 *
 * 	Upon call of this helper, the program attempts to jump into a
 * 	program referenced at index *index* in *prog_array_map*, a
 * 	special map of type **BPF_MAP_TYPE_PROG_ARRAY**, and passes
 * 	*ctx*, a pointer to the context.
 *
 * 	If the call succeeds, the kernel immediately runs the first
 * 	instruction of the new program. This is not a function call,
 * 	and it never returns to the previous program. If the call
 * 	fails, then the helper has no effect, and the caller continues
 * 	to run its subsequent instructions. A call can fail if the
 * 	destination program for the jump does not exist (i.e. *index*
 * 	is superior to the number of entries in *prog_array_map*), or
 * 	if the maximum number of tail calls has been reached for this
 * 	chain of programs. This limit is defined in the kernel by the
 * 	macro **MAX_TAIL_CALL_CNT** (not accessible to user space),
 * 	which is currently set to 32.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_tail_call)(void *ctx, void *prog_array_map, __u32 index) = (void *) 12;

/*
 * bpf_clone_redirect
 *
 * 	Clone and redirect the packet associated to *skb* to another
 * 	net device of index *ifindex*. Both ingress and egress
 * 	interfaces can be used for redirection. The **BPF_F_INGRESS**
 * 	value in *flags* is used to make the distinction (ingress path
 * 	is selected if the flag is present, egress path otherwise).
 * 	This is the only flag supported for now.
 *
 * 	In comparison with **bpf_redirect**\ () helper,
 * 	**bpf_clone_redirect**\ () has the associated cost of
 * 	duplicating the packet buffer, but this can be executed out of
 * 	the eBPF program. Conversely, **bpf_redirect**\ () is more
 * 	efficient, but it is handled through an action code where the
 * 	redirection happens only after the eBPF program has returned.
 *
 * 	A call to this helper is susceptible to change the underlying
 * 	packet buffer. Therefore, at load time, all checks on pointers
 * 	previously done by the verifier are invalidated and must be
 * 	performed again, if the helper is used in combination with
 * 	direct packet access.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_clone_redirect)(struct __sk_buff *skb, __u32 ifindex, __u64 flags) = (void *) 13;

/*
 * bpf_get_current_pid_tgid
 *
 *
 * Returns
 * 	A 64-bit integer containing the current tgid and pid, and
 * 	created as such:
 * 	*current_task*\ **->tgid << 32 \|**
 * 	*current_task*\ **->pid**.
 */
static __u64 (*bpf_get_current_pid_tgid)(void) = (void *) 14;

/*
 * bpf_get_current_uid_gid
 *
 *
 * Returns
 * 	A 64-bit integer containing the current GID and UID, and
 * 	created as such: *current_gid* **<< 32 \|** *current_uid*.
 */
static __u64 (*bpf_get_current_uid_gid)(void) = (void *) 15;

/*
 * bpf_get_current_comm
 *
 * 	Copy the **comm** attribute of the current task into *buf* of
 * 	*size_of_buf*. The **comm** attribute contains the name of
 * 	the executable (excluding the path) for the current task. The
 * 	*size_of_buf* must be strictly positive. On success, the
 * 	helper makes sure that the *buf* is NUL-terminated. On failure,
 * 	it is filled with zeroes.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_get_current_comm)(void *buf, __u32 size_of_buf) = (void *) 16;

/*
 * bpf_get_cgroup_classid
 *
 * 	Retrieve the classid for the current task, i.e. for the net_cls
 * 	cgroup to which *skb* belongs.
 *
 * 	This helper can be used on TC egress path, but not on ingress.
 *
 * 	The net_cls cgroup provides an interface to tag network packets
 * 	based on a user-provided identifier for all traffic coming from
 * 	the tasks belonging to the related cgroup. See also the related
 * 	kernel documentation, available from the Linux sources in file
 * 	*Documentation/admin-guide/cgroup-v1/net_cls.rst*.
 *
 * 	The Linux kernel has two versions for cgroups: there are
 * 	cgroups v1 and cgroups v2. Both are available to users, who can
 * 	use a mixture of them, but note that the net_cls cgroup is for
 * 	cgroup v1 only. This makes it incompatible with BPF programs
 * 	run on cgroups, which is a cgroup-v2-only feature (a socket can
 * 	only hold data for one version of cgroups at a time).
 *
 * 	This helper is only available is the kernel was compiled with
 * 	the **CONFIG_CGROUP_NET_CLASSID** configuration option set to
 * 	"**y**" or to "**m**".
 *
 * Returns
 * 	The classid, or 0 for the default unconfigured classid.
 */
static __u32 (*bpf_get_cgroup_classid)(struct __sk_buff *skb) = (void *) 17;

/*
 * bpf_skb_vlan_push
 *
 * 	Push a *vlan_tci* (VLAN tag control information) of protocol
 * 	*vlan_proto* to the packet associated to *skb*, then update
 * 	the checksum. Note that if *vlan_proto* is different from
 * 	**ETH_P_8021Q** and **ETH_P_8021AD**, it is considered to
 * 	be **ETH_P_8021Q**.
 *
 * 	A call to this helper is susceptible to change the underlying
 * 	packet buffer. Therefore, at load time, all checks on pointers
 * 	previously done by the verifier are invalidated and must be
 * 	performed again, if the helper is used in combination with
 * 	direct packet access.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_skb_vlan_push)(struct __sk_buff *skb, __be16 vlan_proto, __u16 vlan_tci) = (void *) 18;

/*
 * bpf_skb_vlan_pop
 *
 * 	Pop a VLAN header from the packet associated to *skb*.
 *
 * 	A call to this helper is susceptible to change the underlying
 * 	packet buffer. Therefore, at load time, all checks on pointers
 * 	previously done by the verifier are invalidated and must be
 * 	performed again, if the helper is used in combination with
 * 	direct packet access.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_skb_vlan_pop)(struct __sk_buff *skb) = (void *) 19;

/*
 * bpf_skb_get_tunnel_key
 *
 * 	Get tunnel metadata. This helper takes a pointer *key* to an
 * 	empty **struct bpf_tunnel_key** of **size**, that will be
 * 	filled with tunnel metadata for the packet associated to *skb*.
 * 	The *flags* can be set to **BPF_F_TUNINFO_IPV6**, which
 * 	indicates that the tunnel is based on IPv6 protocol instead of
 * 	IPv4.
 *
 * 	The **struct bpf_tunnel_key** is an object that generalizes the
 * 	principal parameters used by various tunneling protocols into a
 * 	single struct. This way, it can be used to easily make a
 * 	decision based on the contents of the encapsulation header,
 * 	"summarized" in this struct. In particular, it holds the IP
 * 	address of the remote end (IPv4 or IPv6, depending on the case)
 * 	in *key*\ **->remote_ipv4** or *key*\ **->remote_ipv6**. Also,
 * 	this struct exposes the *key*\ **->tunnel_id**, which is
 * 	generally mapped to a VNI (Virtual Network Identifier), making
 * 	it programmable together with the **bpf_skb_set_tunnel_key**\
 * 	() helper.
 *
 * 	Let's imagine that the following code is part of a program
 * 	attached to the TC ingress interface, on one end of a GRE
 * 	tunnel, and is supposed to filter out all messages coming from
 * 	remote ends with IPv4 address other than 10.0.0.1:
 *
 * 	::
 *
 * 		int ret;
 * 		struct bpf_tunnel_key key = {};
 *
 * 		ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), 0);
 * 		if (ret < 0)
 * 			return TC_ACT_SHOT;	// drop packet
 *
 * 		if (key.remote_ipv4 != 0x0a000001)
 * 			return TC_ACT_SHOT;	// drop packet
 *
 * 		return TC_ACT_OK;		// accept packet
 *
 * 	This interface can also be used with all encapsulation devices
 * 	that can operate in "collect metadata" mode: instead of having
 * 	one network device per specific configuration, the "collect
 * 	metadata" mode only requires a single device where the
 * 	configuration can be extracted from this helper.
 *
 * 	This can be used together with various tunnels such as VXLan,
 * 	Geneve, GRE or IP in IP (IPIP).
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_skb_get_tunnel_key)(struct __sk_buff *skb, struct bpf_tunnel_key *key, __u32 size, __u64 flags) = (void *) 20;

/*
 * bpf_skb_set_tunnel_key
 *
 * 	Populate tunnel metadata for packet associated to *skb.* The
 * 	tunnel metadata is set to the contents of *key*, of *size*. The
 * 	*flags* can be set to a combination of the following values:
 *
 * 	**BPF_F_TUNINFO_IPV6**
 * 		Indicate that the tunnel is based on IPv6 protocol
 * 		instead of IPv4.
 * 	**BPF_F_ZERO_CSUM_TX**
 * 		For IPv4 packets, add a flag to tunnel metadata
 * 		indicating that checksum computation should be skipped
 * 		and checksum set to zeroes.
 * 	**BPF_F_DONT_FRAGMENT**
 * 		Add a flag to tunnel metadata indicating that the
 * 		packet should not be fragmented.
 * 	**BPF_F_SEQ_NUMBER**
 * 		Add a flag to tunnel metadata indicating that a
 * 		sequence number should be added to tunnel header before
 * 		sending the packet. This flag was added for GRE
 * 		encapsulation, but might be used with other protocols
 * 		as well in the future.
 *
 * 	Here is a typical usage on the transmit path:
 *
 * 	::
 *
 * 		struct bpf_tunnel_key key;
 * 		     populate key ...
 * 		bpf_skb_set_tunnel_key(skb, &key, sizeof(key), 0);
 * 		bpf_clone_redirect(skb, vxlan_dev_ifindex, 0);
 *
 * 	See also the description of the **bpf_skb_get_tunnel_key**\ ()
 * 	helper for additional information.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_skb_set_tunnel_key)(struct __sk_buff *skb, struct bpf_tunnel_key *key, __u32 size, __u64 flags) = (void *) 21;

/*
 * bpf_perf_event_read
 *
 * 	Read the value of a perf event counter. This helper relies on a
 * 	*map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of
 * 	the perf event counter is selected when *map* is updated with
 * 	perf event file descriptors. The *map* is an array whose size
 * 	is the number of available CPUs, and each cell contains a value
 * 	relative to one CPU. The value to retrieve is indicated by
 * 	*flags*, that contains the index of the CPU to look up, masked
 * 	with **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to
 * 	**BPF_F_CURRENT_CPU** to indicate that the value for the
 * 	current CPU should be retrieved.
 *
 * 	Note that before Linux 4.13, only hardware perf event can be
 * 	retrieved.
 *
 * 	Also, be aware that the newer helper
 * 	**bpf_perf_event_read_value**\ () is recommended over
 * 	**bpf_perf_event_read**\ () in general. The latter has some ABI
 * 	quirks where error and counter value are used as a return code
 * 	(which is wrong to do since ranges may overlap). This issue is
 * 	fixed with **bpf_perf_event_read_value**\ (), which at the same
 * 	time provides more features over the **bpf_perf_event_read**\
 * 	() interface. Please refer to the description of
 * 	**bpf_perf_event_read_value**\ () for details.
 *
 * Returns
 * 	The value of the perf event counter read from the map, or a
 * 	negative error code in case of failure.
 */
static __u64 (*bpf_perf_event_read)(void *map, __u64 flags) = (void *) 22;

/*
 * bpf_redirect
 *
 * 	Redirect the packet to another net device of index *ifindex*.
 * 	This helper is somewhat similar to **bpf_clone_redirect**\
 * 	(), except that the packet is not cloned, which provides
 * 	increased performance.
 *
 * 	Except for XDP, both ingress and egress interfaces can be used
 * 	for redirection. The **BPF_F_INGRESS** value in *flags* is used
 * 	to make the distinction (ingress path is selected if the flag
 * 	is present, egress path otherwise). Currently, XDP only
 * 	supports redirection to the egress interface, and accepts no
 * 	flag at all.
 *
 * 	The same effect can also be attained with the more generic
 * 	**bpf_redirect_map**\ (), which uses a BPF map to store the
 * 	redirect target instead of providing it directly to the helper.
 *
 * Returns
 * 	For XDP, the helper returns **XDP_REDIRECT** on success or
 * 	**XDP_ABORTED** on error. For other program types, the values
 * 	are **TC_ACT_REDIRECT** on success or **TC_ACT_SHOT** on
 * 	error.
 */
static long (*bpf_redirect)(__u32 ifindex, __u64 flags) = (void *) 23;

/*
 * bpf_get_route_realm
 *
 * 	Retrieve the realm or the route, that is to say the
 * 	**tclassid** field of the destination for the *skb*. The
 * 	indentifier retrieved is a user-provided tag, similar to the
 * 	one used with the net_cls cgroup (see description for
 * 	**bpf_get_cgroup_classid**\ () helper), but here this tag is
 * 	held by a route (a destination entry), not by a task.
 *
 * 	Retrieving this identifier works with the clsact TC egress hook
 * 	(see also **tc-bpf(8)**), or alternatively on conventional
 * 	classful egress qdiscs, but not on TC ingress path. In case of
 * 	clsact TC egress hook, this has the advantage that, internally,
 * 	the destination entry has not been dropped yet in the transmit
 * 	path. Therefore, the destination entry does not need to be
 * 	artificially held via **netif_keep_dst**\ () for a classful
 * 	qdisc until the *skb* is freed.
 *
 * 	This helper is available only if the kernel was compiled with
 * 	**CONFIG_IP_ROUTE_CLASSID** configuration option.
 *
 * Returns
 * 	The realm of the route for the packet associated to *skb*, or 0
 * 	if none was found.
 */
static __u32 (*bpf_get_route_realm)(struct __sk_buff *skb) = (void *) 24;

/*
 * bpf_perf_event_output
 *
 * 	Write raw *data* blob into a special BPF perf event held by
 * 	*map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf
 * 	event must have the following attributes: **PERF_SAMPLE_RAW**
 * 	as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and
 * 	**PERF_COUNT_SW_BPF_OUTPUT** as **config**.
 *
 * 	The *flags* are used to indicate the index in *map* for which
 * 	the value must be put, masked with **BPF_F_INDEX_MASK**.
 * 	Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU**
 * 	to indicate that the index of the current CPU core should be
 * 	used.
 *
 * 	The value to write, of *size*, is passed through eBPF stack and
 * 	pointed by *data*.
 *
 * 	The context of the program *ctx* needs also be passed to the
 * 	helper.
 *
 * 	On user space, a program willing to read the values needs to
 * 	call **perf_event_open**\ () on the perf event (either for
 * 	one or for all CPUs) and to store the file descriptor into the
 * 	*map*. This must be done before the eBPF program can send data
 * 	into it. An example is available in file
 * 	*samples/bpf/trace_output_user.c* in the Linux kernel source
 * 	tree (the eBPF program counterpart is in
 * 	*samples/bpf/trace_output_kern.c*).
 *
 * 	**bpf_perf_event_output**\ () achieves better performance
 * 	than **bpf_trace_printk**\ () for sharing data with user
 * 	space, and is much better suitable for streaming data from eBPF
 * 	programs.
 *
 * 	Note that this helper is not restricted to tracing use cases
 * 	and can be used with programs attached to TC or XDP as well,
 * 	where it allows for passing data to user space listeners. Data
 * 	can be:
 *
 * 	* Only custom structs,
 * 	* Only the packet payload, or
 * 	* A combination of both.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_perf_event_output)(void *ctx, void *map, __u64 flags, void *data, __u64 size) = (void *) 25;

/*
 * bpf_skb_load_bytes
 *
 * 	This helper was provided as an easy way to load data from a
 * 	packet. It can be used to load *len* bytes from *offset* from
 * 	the packet associated to *skb*, into the buffer pointed by
 * 	*to*.
 *
 * 	Since Linux 4.7, usage of this helper has mostly been replaced
 * 	by "direct packet access", enabling packet data to be
 * 	manipulated with *skb*\ **->data** and *skb*\ **->data_end**
 * 	pointing respectively to the first byte of packet data and to
 * 	the byte after the last byte of packet data. However, it
 * 	remains useful if one wishes to read large quantities of data
 * 	at once from a packet into the eBPF stack.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_skb_load_bytes)(const void *skb, __u32 offset, void *to, __u32 len) = (void *) 26;

/*
 * bpf_get_stackid
 *
 * 	Walk a user or a kernel stack and return its id. To achieve
 * 	this, the helper needs *ctx*, which is a pointer to the context
 * 	on which the tracing program is executed, and a pointer to a
 * 	*map* of type **BPF_MAP_TYPE_STACK_TRACE**.
 *
 * 	The last argument, *flags*, holds the number of stack frames to
 * 	skip (from 0 to 255), masked with
 * 	**BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set
 * 	a combination of the following flags:
 *
 * 	**BPF_F_USER_STACK**
 * 		Collect a user space stack instead of a kernel stack.
 * 	**BPF_F_FAST_STACK_CMP**
 * 		Compare stacks by hash only.
 * 	**BPF_F_REUSE_STACKID**
 * 		If two different stacks hash into the same *stackid*,
 * 		discard the old one.
 *
 * 	The stack id retrieved is a 32 bit long integer handle which
 * 	can be further combined with other data (including other stack
 * 	ids) and used as a key into maps. This can be useful for
 * 	generating a variety of graphs (such as flame graphs or off-cpu
 * 	graphs).
 *
 * 	For walking a stack, this helper is an improvement over
 * 	**bpf_probe_read**\ (), which can be used with unrolled loops
 * 	but is not efficient and consumes a lot of eBPF instructions.
 * 	Instead, **bpf_get_stackid**\ () can collect up to
 * 	**PERF_MAX_STACK_DEPTH** both kernel and user frames. Note that
 * 	this limit can be controlled with the **sysctl** program, and
 * 	that it should be manually increased in order to profile long
 * 	user stacks (such as stacks for Java programs). To do so, use:
 *
 * 	::
 *
 * 		# sysctl kernel.perf_event_max_stack=<new value>
 *
 * Returns
 * 	The positive or null stack id on success, or a negative error
 * 	in case of failure.
 */
static long (*bpf_get_stackid)(void *ctx, void *map, __u64 flags) = (void *) 27;

/*
 * bpf_csum_diff
 *
 * 	Compute a checksum difference, from the raw buffer pointed by
 * 	*from*, of length *from_size* (that must be a multiple of 4),
 * 	towards the raw buffer pointed by *to*, of size *to_size*
 * 	(same remark). An optional *seed* can be added to the value
 * 	(this can be cascaded, the seed may come from a previous call
 * 	to the helper).
 *
 * 	This is flexible enough to be used in several ways:
 *
 * 	* With *from_size* == 0, *to_size* > 0 and *seed* set to
 * 	  checksum, it can be used when pushing new data.
 * 	* With *from_size* > 0, *to_size* == 0 and *seed* set to
 * 	  checksum, it can be used when removing data from a packet.
 * 	* With *from_size* > 0, *to_size* > 0 and *seed* set to 0, it
 * 	  can be used to compute a diff. Note that *from_size* and
 * 	  *to_size* do not need to be equal.
 *
 * 	This helper can be used in combination with
 * 	**bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\ (), to
 * 	which one can feed in the difference computed with
 * 	**bpf_csum_diff**\ ().
 *
 * Returns
 * 	The checksum result, or a negative error code in case of
 * 	failure.
 */
static __s64 (*bpf_csum_diff)(__be32 *from, __u32 from_size, __be32 *to, __u32 to_size, __wsum seed) = (void *) 28;

/*
 * bpf_skb_get_tunnel_opt
 *
 * 	Retrieve tunnel options metadata for the packet associated to
 * 	*skb*, and store the raw tunnel option data to the buffer *opt*
 * 	of *size*.
 *
 * 	This helper can be used with encapsulation devices that can
 * 	operate in "collect metadata" mode (please refer to the related
 * 	note in the description of **bpf_skb_get_tunnel_key**\ () for
 * 	more details). A particular example where this can be used is
 * 	in combination with the Geneve encapsulation protocol, where it
 * 	allows for pushing (with **bpf_skb_get_tunnel_opt**\ () helper)
 * 	and retrieving arbitrary TLVs (Type-Length-Value headers) from
 * 	the eBPF program. This allows for full customization of these
 * 	headers.
 *
 * Returns
 * 	The size of the option data retrieved.
 */
static long (*bpf_skb_get_tunnel_opt)(struct __sk_buff *skb, void *opt, __u32 size) = (void *) 29;

/*
 * bpf_skb_set_tunnel_opt
 *
 * 	Set tunnel options metadata for the packet associated to *skb*
 * 	to the option data contained in the raw buffer *opt* of *size*.
 *
 * 	See also the description of the **bpf_skb_get_tunnel_opt**\ ()
 * 	helper for additional information.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_skb_set_tunnel_opt)(struct __sk_buff *skb, void *opt, __u32 size) = (void *) 30;

/*
 * bpf_skb_change_proto
 *
 * 	Change the protocol of the *skb* to *proto*. Currently
 * 	supported are transition from IPv4 to IPv6, and from IPv6 to
 * 	IPv4. The helper takes care of the groundwork for the
 * 	transition, including resizing the socket buffer. The eBPF
 * 	program is expected to fill the new headers, if any, via
 * 	**skb_store_bytes**\ () and to recompute the checksums with
 * 	**bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\
 * 	(). The main case for this helper is to perform NAT64
 * 	operations out of an eBPF program.
 *
 * 	Internally, the GSO type is marked as dodgy so that headers are
 * 	checked and segments are recalculated by the GSO/GRO engine.
 * 	The size for GSO target is adapted as well.
 *
 * 	All values for *flags* are reserved for future usage, and must
 * 	be left at zero.
 *
 * 	A call to this helper is susceptible to change the underlying
 * 	packet buffer. Therefore, at load time, all checks on pointers
 * 	previously done by the verifier are invalidated and must be
 * 	performed again, if the helper is used in combination with
 * 	direct packet access.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_skb_change_proto)(struct __sk_buff *skb, __be16 proto, __u64 flags) = (void *) 31;

/*
 * bpf_skb_change_type
 *
 * 	Change the packet type for the packet associated to *skb*. This
 * 	comes down to setting *skb*\ **->pkt_type** to *type*, except
 * 	the eBPF program does not have a write access to *skb*\
 * 	**->pkt_type** beside this helper. Using a helper here allows
 * 	for graceful handling of errors.
 *
 * 	The major use case is to change incoming *skb*s to
 * 	**PACKET_HOST** in a programmatic way instead of having to
 * 	recirculate via **redirect**\ (..., **BPF_F_INGRESS**), for
 * 	example.
 *
 * 	Note that *type* only allows certain values. At this time, they
 * 	are:
 *
 * 	**PACKET_HOST**
 * 		Packet is for us.
 * 	**PACKET_BROADCAST**
 * 		Send packet to all.
 * 	**PACKET_MULTICAST**
 * 		Send packet to group.
 * 	**PACKET_OTHERHOST**
 * 		Send packet to someone else.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_skb_change_type)(struct __sk_buff *skb, __u32 type) = (void *) 32;

/*
 * bpf_skb_under_cgroup
 *
 * 	Check whether *skb* is a descendant of the cgroup2 held by
 * 	*map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*.
 *
 * Returns
 * 	The return value depends on the result of the test, and can be:
 *
 * 	* 0, if the *skb* failed the cgroup2 descendant test.
 * 	* 1, if the *skb* succeeded the cgroup2 descendant test.
 * 	* A negative error code, if an error occurred.
 */
static long (*bpf_skb_under_cgroup)(struct __sk_buff *skb, void *map, __u32 index) = (void *) 33;

/*
 * bpf_get_hash_recalc
 *
 * 	Retrieve the hash of the packet, *skb*\ **->hash**. If it is
 * 	not set, in particular if the hash was cleared due to mangling,
 * 	recompute this hash. Later accesses to the hash can be done
 * 	directly with *skb*\ **->hash**.
 *
 * 	Calling **bpf_set_hash_invalid**\ (), changing a packet
 * 	prototype with **bpf_skb_change_proto**\ (), or calling
 * 	**bpf_skb_store_bytes**\ () with the
 * 	**BPF_F_INVALIDATE_HASH** are actions susceptible to clear
 * 	the hash and to trigger a new computation for the next call to
 * 	**bpf_get_hash_recalc**\ ().
 *
 * Returns
 * 	The 32-bit hash.
 */
static __u32 (*bpf_get_hash_recalc)(struct __sk_buff *skb) = (void *) 34;

/*
 * bpf_get_current_task
 *
 *
 * Returns
 * 	A pointer to the current task struct.
 */
static __u64 (*bpf_get_current_task)(void) = (void *) 35;

/*
 * bpf_probe_write_user
 *
 * 	Attempt in a safe way to write *len* bytes from the buffer
 * 	*src* to *dst* in memory. It only works for threads that are in
 * 	user context, and *dst* must be a valid user space address.
 *
 * 	This helper should not be used to implement any kind of
 * 	security mechanism because of TOC-TOU attacks, but rather to
 * 	debug, divert, and manipulate execution of semi-cooperative
 * 	processes.
 *
 * 	Keep in mind that this feature is meant for experiments, and it
 * 	has a risk of crashing the system and running programs.
 * 	Therefore, when an eBPF program using this helper is attached,
 * 	a warning including PID and process name is printed to kernel
 * 	logs.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_probe_write_user)(void *dst, const void *src, __u32 len) = (void *) 36;

/*
 * bpf_current_task_under_cgroup
 *
 * 	Check whether the probe is being run is the context of a given
 * 	subset of the cgroup2 hierarchy. The cgroup2 to test is held by
 * 	*map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*.
 *
 * Returns
 * 	The return value depends on the result of the test, and can be:
 *
 * 	* 0, if the *skb* task belongs to the cgroup2.
 * 	* 1, if the *skb* task does not belong to the cgroup2.
 * 	* A negative error code, if an error occurred.
 */
static long (*bpf_current_task_under_cgroup)(void *map, __u32 index) = (void *) 37;

/*
 * bpf_skb_change_tail
 *
 * 	Resize (trim or grow) the packet associated to *skb* to the
 * 	new *len*. The *flags* are reserved for future usage, and must
 * 	be left at zero.
 *
 * 	The basic idea is that the helper performs the needed work to
 * 	change the size of the packet, then the eBPF program rewrites
 * 	the rest via helpers like **bpf_skb_store_bytes**\ (),
 * 	**bpf_l3_csum_replace**\ (), **bpf_l3_csum_replace**\ ()
 * 	and others. This helper is a slow path utility intended for
 * 	replies with control messages. And because it is targeted for
 * 	slow path, the helper itself can afford to be slow: it
 * 	implicitly linearizes, unclones and drops offloads from the
 * 	*skb*.
 *
 * 	A call to this helper is susceptible to change the underlying
 * 	packet buffer. Therefore, at load time, all checks on pointers
 * 	previously done by the verifier are invalidated and must be
 * 	performed again, if the helper is used in combination with
 * 	direct packet access.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_skb_change_tail)(struct __sk_buff *skb, __u32 len, __u64 flags) = (void *) 38;

/*
 * bpf_skb_pull_data
 *
 * 	Pull in non-linear data in case the *skb* is non-linear and not
 * 	all of *len* are part of the linear section. Make *len* bytes
 * 	from *skb* readable and writable. If a zero value is passed for
 * 	*len*, then the whole length of the *skb* is pulled.
 *
 * 	This helper is only needed for reading and writing with direct
 * 	packet access.
 *
 * 	For direct packet access, testing that offsets to access
 * 	are within packet boundaries (test on *skb*\ **->data_end**) is
 * 	susceptible to fail if offsets are invalid, or if the requested
 * 	data is in non-linear parts of the *skb*. On failure the
 * 	program can just bail out, or in the case of a non-linear
 * 	buffer, use a helper to make the data available. The
 * 	**bpf_skb_load_bytes**\ () helper is a first solution to access
 * 	the data. Another one consists in using **bpf_skb_pull_data**
 * 	to pull in once the non-linear parts, then retesting and
 * 	eventually access the data.
 *
 * 	At the same time, this also makes sure the *skb* is uncloned,
 * 	which is a necessary condition for direct write. As this needs
 * 	to be an invariant for the write part only, the verifier
 * 	detects writes and adds a prologue that is calling
 * 	**bpf_skb_pull_data()** to effectively unclone the *skb* from
 * 	the very beginning in case it is indeed cloned.
 *
 * 	A call to this helper is susceptible to change the underlying
 * 	packet buffer. Therefore, at load time, all checks on pointers
 * 	previously done by the verifier are invalidated and must be
 * 	performed again, if the helper is used in combination with
 * 	direct packet access.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_skb_pull_data)(struct __sk_buff *skb, __u32 len) = (void *) 39;

/*
 * bpf_csum_update
 *
 * 	Add the checksum *csum* into *skb*\ **->csum** in case the
 * 	driver has supplied a checksum for the entire packet into that
 * 	field. Return an error otherwise. This helper is intended to be
 * 	used in combination with **bpf_csum_diff**\ (), in particular
 * 	when the checksum needs to be updated after data has been
 * 	written into the packet through direct packet access.
 *
 * Returns
 * 	The checksum on success, or a negative error code in case of
 * 	failure.
 */
static __s64 (*bpf_csum_update)(struct __sk_buff *skb, __wsum csum) = (void *) 40;

/*
 * bpf_set_hash_invalid
 *
 * 	Invalidate the current *skb*\ **->hash**. It can be used after
 * 	mangling on headers through direct packet access, in order to
 * 	indicate that the hash is outdated and to trigger a
 * 	recalculation the next time the kernel tries to access this
 * 	hash or when the **bpf_get_hash_recalc**\ () helper is called.
 *
 */
static void (*bpf_set_hash_invalid)(struct __sk_buff *skb) = (void *) 41;

/*
 * bpf_get_numa_node_id
 *
 * 	Return the id of the current NUMA node. The primary use case
 * 	for this helper is the selection of sockets for the local NUMA
 * 	node, when the program is attached to sockets using the
 * 	**SO_ATTACH_REUSEPORT_EBPF** option (see also **socket(7)**),
 * 	but the helper is also available to other eBPF program types,
 * 	similarly to **bpf_get_smp_processor_id**\ ().
 *
 * Returns
 * 	The id of current NUMA node.
 */
static long (*bpf_get_numa_node_id)(void) = (void *) 42;

/*
 * bpf_skb_change_head
 *
 * 	Grows headroom of packet associated to *skb* and adjusts the
 * 	offset of the MAC header accordingly, adding *len* bytes of
 * 	space. It automatically extends and reallocates memory as
 * 	required.
 *
 * 	This helper can be used on a layer 3 *skb* to push a MAC header
 * 	for redirection into a layer 2 device.
 *
 * 	All values for *flags* are reserved for future usage, and must
 * 	be left at zero.
 *
 * 	A call to this helper is susceptible to change the underlying
 * 	packet buffer. Therefore, at load time, all checks on pointers
 * 	previously done by the verifier are invalidated and must be
 * 	performed again, if the helper is used in combination with
 * 	direct packet access.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_skb_change_head)(struct __sk_buff *skb, __u32 len, __u64 flags) = (void *) 43;

/*
 * bpf_xdp_adjust_head
 *
 * 	Adjust (move) *xdp_md*\ **->data** by *delta* bytes. Note that
 * 	it is possible to use a negative value for *delta*. This helper
 * 	can be used to prepare the packet for pushing or popping
 * 	headers.
 *
 * 	A call to this helper is susceptible to change the underlying
 * 	packet buffer. Therefore, at load time, all checks on pointers
 * 	previously done by the verifier are invalidated and must be
 * 	performed again, if the helper is used in combination with
 * 	direct packet access.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_xdp_adjust_head)(struct xdp_md *xdp_md, int delta) = (void *) 44;

/*
 * bpf_probe_read_str
 *
 * 	Copy a NUL terminated string from an unsafe kernel address
 * 	*unsafe_ptr* to *dst*. See **bpf_probe_read_kernel_str**\ () for
 * 	more details.
 *
 * 	Generally, use **bpf_probe_read_user_str**\ () or
 * 	**bpf_probe_read_kernel_str**\ () instead.
 *
 * Returns
 * 	On success, the strictly positive length of the string,
 * 	including the trailing NUL character. On error, a negative
 * 	value.
 */
static long (*bpf_probe_read_str)(void *dst, __u32 size, const void *unsafe_ptr) = (void *) 45;

/*
 * bpf_get_socket_cookie
 *
 * 	If the **struct sk_buff** pointed by *skb* has a known socket,
 * 	retrieve the cookie (generated by the kernel) of this socket.
 * 	If no cookie has been set yet, generate a new cookie. Once
 * 	generated, the socket cookie remains stable for the life of the
 * 	socket. This helper can be useful for monitoring per socket
 * 	networking traffic statistics as it provides a global socket
 * 	identifier that can be assumed unique.
 *
 * Returns
 * 	A 8-byte long non-decreasing number on success, or 0 if the
 * 	socket field is missing inside *skb*.
 */
static __u64 (*bpf_get_socket_cookie)(void *ctx) = (void *) 46;

/*
 * bpf_get_socket_uid
 *
 *
 * Returns
 * 	The owner UID of the socket associated to *skb*. If the socket
 * 	is **NULL**, or if it is not a full socket (i.e. if it is a
 * 	time-wait or a request socket instead), **overflowuid** value
 * 	is returned (note that **overflowuid** might also be the actual
 * 	UID value for the socket).
 */
static __u32 (*bpf_get_socket_uid)(struct __sk_buff *skb) = (void *) 47;

/*
 * bpf_set_hash
 *
 * 	Set the full hash for *skb* (set the field *skb*\ **->hash**)
 * 	to value *hash*.
 *
 * Returns
 * 	0
 */
static long (*bpf_set_hash)(struct __sk_buff *skb, __u32 hash) = (void *) 48;

/*
 * bpf_setsockopt
 *
 * 	Emulate a call to **setsockopt()** on the socket associated to
 * 	*bpf_socket*, which must be a full socket. The *level* at
 * 	which the option resides and the name *optname* of the option
 * 	must be specified, see **setsockopt(2)** for more information.
 * 	The option value of length *optlen* is pointed by *optval*.
 *
 * 	*bpf_socket* should be one of the following:
 *
 * 	* **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**.
 * 	* **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**
 * 	  and **BPF_CGROUP_INET6_CONNECT**.
 *
 * 	This helper actually implements a subset of **setsockopt()**.
 * 	It supports the following *level*\ s:
 *
 * 	* **SOL_SOCKET**, which supports the following *optname*\ s:
 * 	  **SO_RCVBUF**, **SO_SNDBUF**, **SO_MAX_PACING_RATE**,
 * 	  **SO_PRIORITY**, **SO_RCVLOWAT**, **SO_MARK**,
 * 	  **SO_BINDTODEVICE**, **SO_KEEPALIVE**.
 * 	* **IPPROTO_TCP**, which supports the following *optname*\ s:
 * 	  **TCP_CONGESTION**, **TCP_BPF_IW**,
 * 	  **TCP_BPF_SNDCWND_CLAMP**, **TCP_SAVE_SYN**,
 * 	  **TCP_KEEPIDLE**, **TCP_KEEPINTVL**, **TCP_KEEPCNT**,
 * 	  **TCP_SYNCNT**, **TCP_USER_TIMEOUT**.
 * 	* **IPPROTO_IP**, which supports *optname* **IP_TOS**.
 * 	* **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_setsockopt)(void *bpf_socket, int level, int optname, void *optval, int optlen) = (void *) 49;

/*
 * bpf_skb_adjust_room
 *
 * 	Grow or shrink the room for data in the packet associated to
 * 	*skb* by *len_diff*, and according to the selected *mode*.
 *
 * 	By default, the helper will reset any offloaded checksum
 * 	indicator of the skb to CHECKSUM_NONE. This can be avoided
 * 	by the following flag:
 *
 * 	* **BPF_F_ADJ_ROOM_NO_CSUM_RESET**: Do not reset offloaded
 * 	  checksum data of the skb to CHECKSUM_NONE.
 *
 * 	There are two supported modes at this time:
 *
 * 	* **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer
 * 	  (room space is added or removed below the layer 2 header).
 *
 * 	* **BPF_ADJ_ROOM_NET**: Adjust room at the network layer
 * 	  (room space is added or removed below the layer 3 header).
 *
 * 	The following flags are supported at this time:
 *
 * 	* **BPF_F_ADJ_ROOM_FIXED_GSO**: Do not adjust gso_size.
 * 	  Adjusting mss in this way is not allowed for datagrams.
 *
 * 	* **BPF_F_ADJ_ROOM_ENCAP_L3_IPV4**,
 * 	  **BPF_F_ADJ_ROOM_ENCAP_L3_IPV6**:
 * 	  Any new space is reserved to hold a tunnel header.
 * 	  Configure skb offsets and other fields accordingly.
 *
 * 	* **BPF_F_ADJ_ROOM_ENCAP_L4_GRE**,
 * 	  **BPF_F_ADJ_ROOM_ENCAP_L4_UDP**:
 * 	  Use with ENCAP_L3 flags to further specify the tunnel type.
 *
 * 	* **BPF_F_ADJ_ROOM_ENCAP_L2**\ (*len*):
 * 	  Use with ENCAP_L3/L4 flags to further specify the tunnel
 * 	  type; *len* is the length of the inner MAC header.
 *
 * 	A call to this helper is susceptible to change the underlying
 * 	packet buffer. Therefore, at load time, all checks on pointers
 * 	previously done by the verifier are invalidated and must be
 * 	performed again, if the helper is used in combination with
 * 	direct packet access.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_skb_adjust_room)(struct __sk_buff *skb, __s32 len_diff, __u32 mode, __u64 flags) = (void *) 50;

/*
 * bpf_redirect_map
 *
 * 	Redirect the packet to the endpoint referenced by *map* at
 * 	index *key*. Depending on its type, this *map* can contain
 * 	references to net devices (for forwarding packets through other
 * 	ports), or to CPUs (for redirecting XDP frames to another CPU;
 * 	but this is only implemented for native XDP (with driver
 * 	support) as of this writing).
 *
 * 	The lower two bits of *flags* are used as the return code if
 * 	the map lookup fails. This is so that the return value can be
 * 	one of the XDP program return codes up to **XDP_TX**, as chosen
 * 	by the caller. Any higher bits in the *flags* argument must be
 * 	unset.
 *
 * 	See also **bpf_redirect**\ (), which only supports redirecting
 * 	to an ifindex, but doesn't require a map to do so.
 *
 * Returns
 * 	**XDP_REDIRECT** on success, or the value of the two lower bits
 * 	of the *flags* argument on error.
 */
static long (*bpf_redirect_map)(void *map, __u32 key, __u64 flags) = (void *) 51;

/*
 * bpf_sk_redirect_map
 *
 * 	Redirect the packet to the socket referenced by *map* (of type
 * 	**BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and
 * 	egress interfaces can be used for redirection. The
 * 	**BPF_F_INGRESS** value in *flags* is used to make the
 * 	distinction (ingress path is selected if the flag is present,
 * 	egress path otherwise). This is the only flag supported for now.
 *
 * Returns
 * 	**SK_PASS** on success, or **SK_DROP** on error.
 */
static long (*bpf_sk_redirect_map)(struct __sk_buff *skb, void *map, __u32 key, __u64 flags) = (void *) 52;

/*
 * bpf_sock_map_update
 *
 * 	Add an entry to, or update a *map* referencing sockets. The
 * 	*skops* is used as a new value for the entry associated to
 * 	*key*. *flags* is one of:
 *
 * 	**BPF_NOEXIST**
 * 		The entry for *key* must not exist in the map.
 * 	**BPF_EXIST**
 * 		The entry for *key* must already exist in the map.
 * 	**BPF_ANY**
 * 		No condition on the existence of the entry for *key*.
 *
 * 	If the *map* has eBPF programs (parser and verdict), those will
 * 	be inherited by the socket being added. If the socket is
 * 	already attached to eBPF programs, this results in an error.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_sock_map_update)(struct bpf_sock_ops *skops, void *map, void *key, __u64 flags) = (void *) 53;

/*
 * bpf_xdp_adjust_meta
 *
 * 	Adjust the address pointed by *xdp_md*\ **->data_meta** by
 * 	*delta* (which can be positive or negative). Note that this
 * 	operation modifies the address stored in *xdp_md*\ **->data**,
 * 	so the latter must be loaded only after the helper has been
 * 	called.
 *
 * 	The use of *xdp_md*\ **->data_meta** is optional and programs
 * 	are not required to use it. The rationale is that when the
 * 	packet is processed with XDP (e.g. as DoS filter), it is
 * 	possible to push further meta data along with it before passing
 * 	to the stack, and to give the guarantee that an ingress eBPF
 * 	program attached as a TC classifier on the same device can pick
 * 	this up for further post-processing. Since TC works with socket
 * 	buffers, it remains possible to set from XDP the **mark** or
 * 	**priority** pointers, or other pointers for the socket buffer.
 * 	Having this scratch space generic and programmable allows for
 * 	more flexibility as the user is free to store whatever meta
 * 	data they need.
 *
 * 	A call to this helper is susceptible to change the underlying
 * 	packet buffer. Therefore, at load time, all checks on pointers
 * 	previously done by the verifier are invalidated and must be
 * 	performed again, if the helper is used in combination with
 * 	direct packet access.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_xdp_adjust_meta)(struct xdp_md *xdp_md, int delta) = (void *) 54;

/*
 * bpf_perf_event_read_value
 *
 * 	Read the value of a perf event counter, and store it into *buf*
 * 	of size *buf_size*. This helper relies on a *map* of type
 * 	**BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of the perf event
 * 	counter is selected when *map* is updated with perf event file
 * 	descriptors. The *map* is an array whose size is the number of
 * 	available CPUs, and each cell contains a value relative to one
 * 	CPU. The value to retrieve is indicated by *flags*, that
 * 	contains the index of the CPU to look up, masked with
 * 	**BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to
 * 	**BPF_F_CURRENT_CPU** to indicate that the value for the
 * 	current CPU should be retrieved.
 *
 * 	This helper behaves in a way close to
 * 	**bpf_perf_event_read**\ () helper, save that instead of
 * 	just returning the value observed, it fills the *buf*
 * 	structure. This allows for additional data to be retrieved: in
 * 	particular, the enabled and running times (in *buf*\
 * 	**->enabled** and *buf*\ **->running**, respectively) are
 * 	copied. In general, **bpf_perf_event_read_value**\ () is
 * 	recommended over **bpf_perf_event_read**\ (), which has some
 * 	ABI issues and provides fewer functionalities.
 *
 * 	These values are interesting, because hardware PMU (Performance
 * 	Monitoring Unit) counters are limited resources. When there are
 * 	more PMU based perf events opened than available counters,
 * 	kernel will multiplex these events so each event gets certain
 * 	percentage (but not all) of the PMU time. In case that
 * 	multiplexing happens, the number of samples or counter value
 * 	will not reflect the case compared to when no multiplexing
 * 	occurs. This makes comparison between different runs difficult.
 * 	Typically, the counter value should be normalized before
 * 	comparing to other experiments. The usual normalization is done
 * 	as follows.
 *
 * 	::
 *
 * 		normalized_counter = counter * t_enabled / t_running
 *
 * 	Where t_enabled is the time enabled for event and t_running is
 * 	the time running for event since last normalization. The
 * 	enabled and running times are accumulated since the perf event
 * 	open. To achieve scaling factor between two invocations of an
 * 	eBPF program, users can use CPU id as the key (which is
 * 	typical for perf array usage model) to remember the previous
 * 	value and do the calculation inside the eBPF program.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_perf_event_read_value)(void *map, __u64 flags, struct bpf_perf_event_value *buf, __u32 buf_size) = (void *) 55;

/*
 * bpf_perf_prog_read_value
 *
 * 	For en eBPF program attached to a perf event, retrieve the
 * 	value of the event counter associated to *ctx* and store it in
 * 	the structure pointed by *buf* and of size *buf_size*. Enabled
 * 	and running times are also stored in the structure (see
 * 	description of helper **bpf_perf_event_read_value**\ () for
 * 	more details).
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_perf_prog_read_value)(struct bpf_perf_event_data *ctx, struct bpf_perf_event_value *buf, __u32 buf_size) = (void *) 56;

/*
 * bpf_getsockopt
 *
 * 	Emulate a call to **getsockopt()** on the socket associated to
 * 	*bpf_socket*, which must be a full socket. The *level* at
 * 	which the option resides and the name *optname* of the option
 * 	must be specified, see **getsockopt(2)** for more information.
 * 	The retrieved value is stored in the structure pointed by
 * 	*opval* and of length *optlen*.
 *
 * 	*bpf_socket* should be one of the following:
 *
 * 	* **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**.
 * 	* **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**
 * 	  and **BPF_CGROUP_INET6_CONNECT**.
 *
 * 	This helper actually implements a subset of **getsockopt()**.
 * 	It supports the following *level*\ s:
 *
 * 	* **IPPROTO_TCP**, which supports *optname*
 * 	  **TCP_CONGESTION**.
 * 	* **IPPROTO_IP**, which supports *optname* **IP_TOS**.
 * 	* **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_getsockopt)(void *bpf_socket, int level, int optname, void *optval, int optlen) = (void *) 57;

/*
 * bpf_override_return
 *
 * 	Used for error injection, this helper uses kprobes to override
 * 	the return value of the probed function, and to set it to *rc*.
 * 	The first argument is the context *regs* on which the kprobe
 * 	works.
 *
 * 	This helper works by setting the PC (program counter)
 * 	to an override function which is run in place of the original
 * 	probed function. This means the probed function is not run at
 * 	all. The replacement function just returns with the required
 * 	value.
 *
 * 	This helper has security implications, and thus is subject to
 * 	restrictions. It is only available if the kernel was compiled
 * 	with the **CONFIG_BPF_KPROBE_OVERRIDE** configuration
 * 	option, and in this case it only works on functions tagged with
 * 	**ALLOW_ERROR_INJECTION** in the kernel code.
 *
 * 	Also, the helper is only available for the architectures having
 * 	the CONFIG_FUNCTION_ERROR_INJECTION option. As of this writing,
 * 	x86 architecture is the only one to support this feature.
 *
 * Returns
 * 	0
 */
static long (*bpf_override_return)(struct pt_regs *regs, __u64 rc) = (void *) 58;

/*
 * bpf_sock_ops_cb_flags_set
 *
 * 	Attempt to set the value of the **bpf_sock_ops_cb_flags** field
 * 	for the full TCP socket associated to *bpf_sock_ops* to
 * 	*argval*.
 *
 * 	The primary use of this field is to determine if there should
 * 	be calls to eBPF programs of type
 * 	**BPF_PROG_TYPE_SOCK_OPS** at various points in the TCP
 * 	code. A program of the same type can change its value, per
 * 	connection and as necessary, when the connection is
 * 	established. This field is directly accessible for reading, but
 * 	this helper must be used for updates in order to return an
 * 	error if an eBPF program tries to set a callback that is not
 * 	supported in the current kernel.
 *
 * 	*argval* is a flag array which can combine these flags:
 *
 * 	* **BPF_SOCK_OPS_RTO_CB_FLAG** (retransmission time out)
 * 	* **BPF_SOCK_OPS_RETRANS_CB_FLAG** (retransmission)
 * 	* **BPF_SOCK_OPS_STATE_CB_FLAG** (TCP state change)
 * 	* **BPF_SOCK_OPS_RTT_CB_FLAG** (every RTT)
 *
 * 	Therefore, this function can be used to clear a callback flag by
 * 	setting the appropriate bit to zero. e.g. to disable the RTO
 * 	callback:
 *
 * 	**bpf_sock_ops_cb_flags_set(bpf_sock,**
 * 		**bpf_sock->bpf_sock_ops_cb_flags & ~BPF_SOCK_OPS_RTO_CB_FLAG)**
 *
 * 	Here are some examples of where one could call such eBPF
 * 	program:
 *
 * 	* When RTO fires.
 * 	* When a packet is retransmitted.
 * 	* When the connection terminates.
 * 	* When a packet is sent.
 * 	* When a packet is received.
 *
 * Returns
 * 	Code **-EINVAL** if the socket is not a full TCP socket;
 * 	otherwise, a positive number containing the bits that could not
 * 	be set is returned (which comes down to 0 if all bits were set
 * 	as required).
 */
static long (*bpf_sock_ops_cb_flags_set)(struct bpf_sock_ops *bpf_sock, int argval) = (void *) 59;

/*
 * bpf_msg_redirect_map
 *
 * 	This helper is used in programs implementing policies at the
 * 	socket level. If the message *msg* is allowed to pass (i.e. if
 * 	the verdict eBPF program returns **SK_PASS**), redirect it to
 * 	the socket referenced by *map* (of type
 * 	**BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and
 * 	egress interfaces can be used for redirection. The
 * 	**BPF_F_INGRESS** value in *flags* is used to make the
 * 	distinction (ingress path is selected if the flag is present,
 * 	egress path otherwise). This is the only flag supported for now.
 *
 * Returns
 * 	**SK_PASS** on success, or **SK_DROP** on error.
 */
static long (*bpf_msg_redirect_map)(struct sk_msg_md *msg, void *map, __u32 key, __u64 flags) = (void *) 60;

/*
 * bpf_msg_apply_bytes
 *
 * 	For socket policies, apply the verdict of the eBPF program to
 * 	the next *bytes* (number of bytes) of message *msg*.
 *
 * 	For example, this helper can be used in the following cases:
 *
 * 	* A single **sendmsg**\ () or **sendfile**\ () system call
 * 	  contains multiple logical messages that the eBPF program is
 * 	  supposed to read and for which it should apply a verdict.
 * 	* An eBPF program only cares to read the first *bytes* of a
 * 	  *msg*. If the message has a large payload, then setting up
 * 	  and calling the eBPF program repeatedly for all bytes, even
 * 	  though the verdict is already known, would create unnecessary
 * 	  overhead.
 *
 * 	When called from within an eBPF program, the helper sets a
 * 	counter internal to the BPF infrastructure, that is used to
 * 	apply the last verdict to the next *bytes*. If *bytes* is
 * 	smaller than the current data being processed from a
 * 	**sendmsg**\ () or **sendfile**\ () system call, the first
 * 	*bytes* will be sent and the eBPF program will be re-run with
 * 	the pointer for start of data pointing to byte number *bytes*
 * 	**+ 1**. If *bytes* is larger than the current data being
 * 	processed, then the eBPF verdict will be applied to multiple
 * 	**sendmsg**\ () or **sendfile**\ () calls until *bytes* are
 * 	consumed.
 *
 * 	Note that if a socket closes with the internal counter holding
 * 	a non-zero value, this is not a problem because data is not
 * 	being buffered for *bytes* and is sent as it is received.
 *
 * Returns
 * 	0
 */
static long (*bpf_msg_apply_bytes)(struct sk_msg_md *msg, __u32 bytes) = (void *) 61;

/*
 * bpf_msg_cork_bytes
 *
 * 	For socket policies, prevent the execution of the verdict eBPF
 * 	program for message *msg* until *bytes* (byte number) have been
 * 	accumulated.
 *
 * 	This can be used when one needs a specific number of bytes
 * 	before a verdict can be assigned, even if the data spans
 * 	multiple **sendmsg**\ () or **sendfile**\ () calls. The extreme
 * 	case would be a user calling **sendmsg**\ () repeatedly with
 * 	1-byte long message segments. Obviously, this is bad for
 * 	performance, but it is still valid. If the eBPF program needs
 * 	*bytes* bytes to validate a header, this helper can be used to
 * 	prevent the eBPF program to be called again until *bytes* have
 * 	been accumulated.
 *
 * Returns
 * 	0
 */
static long (*bpf_msg_cork_bytes)(struct sk_msg_md *msg, __u32 bytes) = (void *) 62;

/*
 * bpf_msg_pull_data
 *
 * 	For socket policies, pull in non-linear data from user space
 * 	for *msg* and set pointers *msg*\ **->data** and *msg*\
 * 	**->data_end** to *start* and *end* bytes offsets into *msg*,
 * 	respectively.
 *
 * 	If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a
 * 	*msg* it can only parse data that the (**data**, **data_end**)
 * 	pointers have already consumed. For **sendmsg**\ () hooks this
 * 	is likely the first scatterlist element. But for calls relying
 * 	on the **sendpage** handler (e.g. **sendfile**\ ()) this will
 * 	be the range (**0**, **0**) because the data is shared with
 * 	user space and by default the objective is to avoid allowing
 * 	user space to modify data while (or after) eBPF verdict is
 * 	being decided. This helper can be used to pull in data and to
 * 	set the start and end pointer to given values. Data will be
 * 	copied if necessary (i.e. if data was not linear and if start
 * 	and end pointers do not point to the same chunk).
 *
 * 	A call to this helper is susceptible to change the underlying
 * 	packet buffer. Therefore, at load time, all checks on pointers
 * 	previously done by the verifier are invalidated and must be
 * 	performed again, if the helper is used in combination with
 * 	direct packet access.
 *
 * 	All values for *flags* are reserved for future usage, and must
 * 	be left at zero.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_msg_pull_data)(struct sk_msg_md *msg, __u32 start, __u32 end, __u64 flags) = (void *) 63;

/*
 * bpf_bind
 *
 * 	Bind the socket associated to *ctx* to the address pointed by
 * 	*addr*, of length *addr_len*. This allows for making outgoing
 * 	connection from the desired IP address, which can be useful for
 * 	example when all processes inside a cgroup should use one
 * 	single IP address on a host that has multiple IP configured.
 *
 * 	This helper works for IPv4 and IPv6, TCP and UDP sockets. The
 * 	domain (*addr*\ **->sa_family**) must be **AF_INET** (or
 * 	**AF_INET6**). It's advised to pass zero port (**sin_port**
 * 	or **sin6_port**) which triggers IP_BIND_ADDRESS_NO_PORT-like
 * 	behavior and lets the kernel efficiently pick up an unused
 * 	port as long as 4-tuple is unique. Passing non-zero port might
 * 	lead to degraded performance.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_bind)(struct bpf_sock_addr *ctx, struct sockaddr *addr, int addr_len) = (void *) 64;

/*
 * bpf_xdp_adjust_tail
 *
 * 	Adjust (move) *xdp_md*\ **->data_end** by *delta* bytes. It is
 * 	possible to both shrink and grow the packet tail.
 * 	Shrink done via *delta* being a negative integer.
 *
 * 	A call to this helper is susceptible to change the underlying
 * 	packet buffer. Therefore, at load time, all checks on pointers
 * 	previously done by the verifier are invalidated and must be
 * 	performed again, if the helper is used in combination with
 * 	direct packet access.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_xdp_adjust_tail)(struct xdp_md *xdp_md, int delta) = (void *) 65;

/*
 * bpf_skb_get_xfrm_state
 *
 * 	Retrieve the XFRM state (IP transform framework, see also
 * 	**ip-xfrm(8)**) at *index* in XFRM "security path" for *skb*.
 *
 * 	The retrieved value is stored in the **struct bpf_xfrm_state**
 * 	pointed by *xfrm_state* and of length *size*.
 *
 * 	All values for *flags* are reserved for future usage, and must
 * 	be left at zero.
 *
 * 	This helper is available only if the kernel was compiled with
 * 	**CONFIG_XFRM** configuration option.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_skb_get_xfrm_state)(struct __sk_buff *skb, __u32 index, struct bpf_xfrm_state *xfrm_state, __u32 size, __u64 flags) = (void *) 66;

/*
 * bpf_get_stack
 *
 * 	Return a user or a kernel stack in bpf program provided buffer.
 * 	To achieve this, the helper needs *ctx*, which is a pointer
 * 	to the context on which the tracing program is executed.
 * 	To store the stacktrace, the bpf program provides *buf* with
 * 	a nonnegative *size*.
 *
 * 	The last argument, *flags*, holds the number of stack frames to
 * 	skip (from 0 to 255), masked with
 * 	**BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set
 * 	the following flags:
 *
 * 	**BPF_F_USER_STACK**
 * 		Collect a user space stack instead of a kernel stack.
 * 	**BPF_F_USER_BUILD_ID**
 * 		Collect buildid+offset instead of ips for user stack,
 * 		only valid if **BPF_F_USER_STACK** is also specified.
 *
 * 	**bpf_get_stack**\ () can collect up to
 * 	**PERF_MAX_STACK_DEPTH** both kernel and user frames, subject
 * 	to sufficient large buffer size. Note that
 * 	this limit can be controlled with the **sysctl** program, and
 * 	that it should be manually increased in order to profile long
 * 	user stacks (such as stacks for Java programs). To do so, use:
 *
 * 	::
 *
 * 		# sysctl kernel.perf_event_max_stack=<new value>
 *
 * Returns
 * 	A non-negative value equal to or less than *size* on success,
 * 	or a negative error in case of failure.
 */
static long (*bpf_get_stack)(void *ctx, void *buf, __u32 size, __u64 flags) = (void *) 67;

/*
 * bpf_skb_load_bytes_relative
 *
 * 	This helper is similar to **bpf_skb_load_bytes**\ () in that
 * 	it provides an easy way to load *len* bytes from *offset*
 * 	from the packet associated to *skb*, into the buffer pointed
 * 	by *to*. The difference to **bpf_skb_load_bytes**\ () is that
 * 	a fifth argument *start_header* exists in order to select a
 * 	base offset to start from. *start_header* can be one of:
 *
 * 	**BPF_HDR_START_MAC**
 * 		Base offset to load data from is *skb*'s mac header.
 * 	**BPF_HDR_START_NET**
 * 		Base offset to load data from is *skb*'s network header.
 *
 * 	In general, "direct packet access" is the preferred method to
 * 	access packet data, however, this helper is in particular useful
 * 	in socket filters where *skb*\ **->data** does not always point
 * 	to the start of the mac header and where "direct packet access"
 * 	is not available.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_skb_load_bytes_relative)(const void *skb, __u32 offset, void *to, __u32 len, __u32 start_header) = (void *) 68;

/*
 * bpf_fib_lookup
 *
 * 	Do FIB lookup in kernel tables using parameters in *params*.
 * 	If lookup is successful and result shows packet is to be
 * 	forwarded, the neighbor tables are searched for the nexthop.
 * 	If successful (ie., FIB lookup shows forwarding and nexthop
 * 	is resolved), the nexthop address is returned in ipv4_dst
 * 	or ipv6_dst based on family, smac is set to mac address of
 * 	egress device, dmac is set to nexthop mac address, rt_metric
 * 	is set to metric from route (IPv4/IPv6 only), and ifindex
 * 	is set to the device index of the nexthop from the FIB lookup.
 *
 * 	*plen* argument is the size of the passed in struct.
 * 	*flags* argument can be a combination of one or more of the
 * 	following values:
 *
 * 	**BPF_FIB_LOOKUP_DIRECT**
 * 		Do a direct table lookup vs full lookup using FIB
 * 		rules.
 * 	**BPF_FIB_LOOKUP_OUTPUT**
 * 		Perform lookup from an egress perspective (default is
 * 		ingress).
 *
 * 	*ctx* is either **struct xdp_md** for XDP programs or
 * 	**struct sk_buff** tc cls_act programs.
 *
 * Returns
 * 	* < 0 if any input argument is invalid
 * 	*   0 on success (packet is forwarded, nexthop neighbor exists)
 * 	* > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the
 * 	  packet is not forwarded or needs assist from full stack
 */
static long (*bpf_fib_lookup)(void *ctx, struct bpf_fib_lookup *params, int plen, __u32 flags) = (void *) 69;

/*
 * bpf_sock_hash_update
 *
 * 	Add an entry to, or update a sockhash *map* referencing sockets.
 * 	The *skops* is used as a new value for the entry associated to
 * 	*key*. *flags* is one of:
 *
 * 	**BPF_NOEXIST**
 * 		The entry for *key* must not exist in the map.
 * 	**BPF_EXIST**
 * 		The entry for *key* must already exist in the map.
 * 	**BPF_ANY**
 * 		No condition on the existence of the entry for *key*.
 *
 * 	If the *map* has eBPF programs (parser and verdict), those will
 * 	be inherited by the socket being added. If the socket is
 * 	already attached to eBPF programs, this results in an error.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_sock_hash_update)(struct bpf_sock_ops *skops, void *map, void *key, __u64 flags) = (void *) 70;

/*
 * bpf_msg_redirect_hash
 *
 * 	This helper is used in programs implementing policies at the
 * 	socket level. If the message *msg* is allowed to pass (i.e. if
 * 	the verdict eBPF program returns **SK_PASS**), redirect it to
 * 	the socket referenced by *map* (of type
 * 	**BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and
 * 	egress interfaces can be used for redirection. The
 * 	**BPF_F_INGRESS** value in *flags* is used to make the
 * 	distinction (ingress path is selected if the flag is present,
 * 	egress path otherwise). This is the only flag supported for now.
 *
 * Returns
 * 	**SK_PASS** on success, or **SK_DROP** on error.
 */
static long (*bpf_msg_redirect_hash)(struct sk_msg_md *msg, void *map, void *key, __u64 flags) = (void *) 71;

/*
 * bpf_sk_redirect_hash
 *
 * 	This helper is used in programs implementing policies at the
 * 	skb socket level. If the sk_buff *skb* is allowed to pass (i.e.
 * 	if the verdeict eBPF program returns **SK_PASS**), redirect it
 * 	to the socket referenced by *map* (of type
 * 	**BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and
 * 	egress interfaces can be used for redirection. The
 * 	**BPF_F_INGRESS** value in *flags* is used to make the
 * 	distinction (ingress path is selected if the flag is present,
 * 	egress otherwise). This is the only flag supported for now.
 *
 * Returns
 * 	**SK_PASS** on success, or **SK_DROP** on error.
 */
static long (*bpf_sk_redirect_hash)(struct __sk_buff *skb, void *map, void *key, __u64 flags) = (void *) 72;

/*
 * bpf_lwt_push_encap
 *
 * 	Encapsulate the packet associated to *skb* within a Layer 3
 * 	protocol header. This header is provided in the buffer at
 * 	address *hdr*, with *len* its size in bytes. *type* indicates
 * 	the protocol of the header and can be one of:
 *
 * 	**BPF_LWT_ENCAP_SEG6**
 * 		IPv6 encapsulation with Segment Routing Header
 * 		(**struct ipv6_sr_hdr**). *hdr* only contains the SRH,
 * 		the IPv6 header is computed by the kernel.
 * 	**BPF_LWT_ENCAP_SEG6_INLINE**
 * 		Only works if *skb* contains an IPv6 packet. Insert a
 * 		Segment Routing Header (**struct ipv6_sr_hdr**) inside
 * 		the IPv6 header.
 * 	**BPF_LWT_ENCAP_IP**
 * 		IP encapsulation (GRE/GUE/IPIP/etc). The outer header
 * 		must be IPv4 or IPv6, followed by zero or more
 * 		additional headers, up to **LWT_BPF_MAX_HEADROOM**
 * 		total bytes in all prepended headers. Please note that
 * 		if **skb_is_gso**\ (*skb*) is true, no more than two
 * 		headers can be prepended, and the inner header, if
 * 		present, should be either GRE or UDP/GUE.
 *
 * 	**BPF_LWT_ENCAP_SEG6**\ \* types can be called by BPF programs
 * 	of type **BPF_PROG_TYPE_LWT_IN**; **BPF_LWT_ENCAP_IP** type can
 * 	be called by bpf programs of types **BPF_PROG_TYPE_LWT_IN** and
 * 	**BPF_PROG_TYPE_LWT_XMIT**.
 *
 * 	A call to this helper is susceptible to change the underlying
 * 	packet buffer. Therefore, at load time, all checks on pointers
 * 	previously done by the verifier are invalidated and must be
 * 	performed again, if the helper is used in combination with
 * 	direct packet access.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_lwt_push_encap)(struct __sk_buff *skb, __u32 type, void *hdr, __u32 len) = (void *) 73;

/*
 * bpf_lwt_seg6_store_bytes
 *
 * 	Store *len* bytes from address *from* into the packet
 * 	associated to *skb*, at *offset*. Only the flags, tag and TLVs
 * 	inside the outermost IPv6 Segment Routing Header can be
 * 	modified through this helper.
 *
 * 	A call to this helper is susceptible to change the underlying
 * 	packet buffer. Therefore, at load time, all checks on pointers
 * 	previously done by the verifier are invalidated and must be
 * 	performed again, if the helper is used in combination with
 * 	direct packet access.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_lwt_seg6_store_bytes)(struct __sk_buff *skb, __u32 offset, const void *from, __u32 len) = (void *) 74;

/*
 * bpf_lwt_seg6_adjust_srh
 *
 * 	Adjust the size allocated to TLVs in the outermost IPv6
 * 	Segment Routing Header contained in the packet associated to
 * 	*skb*, at position *offset* by *delta* bytes. Only offsets
 * 	after the segments are accepted. *delta* can be as well
 * 	positive (growing) as negative (shrinking).
 *
 * 	A call to this helper is susceptible to change the underlying
 * 	packet buffer. Therefore, at load time, all checks on pointers
 * 	previously done by the verifier are invalidated and must be
 * 	performed again, if the helper is used in combination with
 * 	direct packet access.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_lwt_seg6_adjust_srh)(struct __sk_buff *skb, __u32 offset, __s32 delta) = (void *) 75;

/*
 * bpf_lwt_seg6_action
 *
 * 	Apply an IPv6 Segment Routing action of type *action* to the
 * 	packet associated to *skb*. Each action takes a parameter
 * 	contained at address *param*, and of length *param_len* bytes.
 * 	*action* can be one of:
 *
 * 	**SEG6_LOCAL_ACTION_END_X**
 * 		End.X action: Endpoint with Layer-3 cross-connect.
 * 		Type of *param*: **struct in6_addr**.
 * 	**SEG6_LOCAL_ACTION_END_T**
 * 		End.T action: Endpoint with specific IPv6 table lookup.
 * 		Type of *param*: **int**.
 * 	**SEG6_LOCAL_ACTION_END_B6**
 * 		End.B6 action: Endpoint bound to an SRv6 policy.
 * 		Type of *param*: **struct ipv6_sr_hdr**.
 * 	**SEG6_LOCAL_ACTION_END_B6_ENCAP**
 * 		End.B6.Encap action: Endpoint bound to an SRv6
 * 		encapsulation policy.
 * 		Type of *param*: **struct ipv6_sr_hdr**.
 *
 * 	A call to this helper is susceptible to change the underlying
 * 	packet buffer. Therefore, at load time, all checks on pointers
 * 	previously done by the verifier are invalidated and must be
 * 	performed again, if the helper is used in combination with
 * 	direct packet access.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_lwt_seg6_action)(struct __sk_buff *skb, __u32 action, void *param, __u32 param_len) = (void *) 76;

/*
 * bpf_rc_repeat
 *
 * 	This helper is used in programs implementing IR decoding, to
 * 	report a successfully decoded repeat key message. This delays
 * 	the generation of a key up event for previously generated
 * 	key down event.
 *
 * 	Some IR protocols like NEC have a special IR message for
 * 	repeating last button, for when a button is held down.
 *
 * 	The *ctx* should point to the lirc sample as passed into
 * 	the program.
 *
 * 	This helper is only available is the kernel was compiled with
 * 	the **CONFIG_BPF_LIRC_MODE2** configuration option set to
 * 	"**y**".
 *
 * Returns
 * 	0
 */
static long (*bpf_rc_repeat)(void *ctx) = (void *) 77;

/*
 * bpf_rc_keydown
 *
 * 	This helper is used in programs implementing IR decoding, to
 * 	report a successfully decoded key press with *scancode*,
 * 	*toggle* value in the given *protocol*. The scancode will be
 * 	translated to a keycode using the rc keymap, and reported as
 * 	an input key down event. After a period a key up event is
 * 	generated. This period can be extended by calling either
 * 	**bpf_rc_keydown**\ () again with the same values, or calling
 * 	**bpf_rc_repeat**\ ().
 *
 * 	Some protocols include a toggle bit, in case the button was
 * 	released and pressed again between consecutive scancodes.
 *
 * 	The *ctx* should point to the lirc sample as passed into
 * 	the program.
 *
 * 	The *protocol* is the decoded protocol number (see
 * 	**enum rc_proto** for some predefined values).
 *
 * 	This helper is only available is the kernel was compiled with
 * 	the **CONFIG_BPF_LIRC_MODE2** configuration option set to
 * 	"**y**".
 *
 * Returns
 * 	0
 */
static long (*bpf_rc_keydown)(void *ctx, __u32 protocol, __u64 scancode, __u32 toggle) = (void *) 78;

/*
 * bpf_skb_cgroup_id
 *
 * 	Return the cgroup v2 id of the socket associated with the *skb*.
 * 	This is roughly similar to the **bpf_get_cgroup_classid**\ ()
 * 	helper for cgroup v1 by providing a tag resp. identifier that
 * 	can be matched on or used for map lookups e.g. to implement
 * 	policy. The cgroup v2 id of a given path in the hierarchy is
 * 	exposed in user space through the f_handle API in order to get
 * 	to the same 64-bit id.
 *
 * 	This helper can be used on TC egress path, but not on ingress,
 * 	and is available only if the kernel was compiled with the
 * 	**CONFIG_SOCK_CGROUP_DATA** configuration option.
 *
 * Returns
 * 	The id is returned or 0 in case the id could not be retrieved.
 */
static __u64 (*bpf_skb_cgroup_id)(struct __sk_buff *skb) = (void *) 79;

/*
 * bpf_get_current_cgroup_id
 *
 *
 * Returns
 * 	A 64-bit integer containing the current cgroup id based
 * 	on the cgroup within which the current task is running.
 */
static __u64 (*bpf_get_current_cgroup_id)(void) = (void *) 80;

/*
 * bpf_get_local_storage
 *
 * 	Get the pointer to the local storage area.
 * 	The type and the size of the local storage is defined
 * 	by the *map* argument.
 * 	The *flags* meaning is specific for each map type,
 * 	and has to be 0 for cgroup local storage.
 *
 * 	Depending on the BPF program type, a local storage area
 * 	can be shared between multiple instances of the BPF program,
 * 	running simultaneously.
 *
 * 	A user should care about the synchronization by himself.
 * 	For example, by using the **BPF_STX_XADD** instruction to alter
 * 	the shared data.
 *
 * Returns
 * 	A pointer to the local storage area.
 */
static void *(*bpf_get_local_storage)(void *map, __u64 flags) = (void *) 81;

/*
 * bpf_sk_select_reuseport
 *
 * 	Select a **SO_REUSEPORT** socket from a
 * 	**BPF_MAP_TYPE_REUSEPORT_ARRAY** *map*.
 * 	It checks the selected socket is matching the incoming
 * 	request in the socket buffer.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_sk_select_reuseport)(struct sk_reuseport_md *reuse, void *map, void *key, __u64 flags) = (void *) 82;

/*
 * bpf_skb_ancestor_cgroup_id
 *
 * 	Return id of cgroup v2 that is ancestor of cgroup associated
 * 	with the *skb* at the *ancestor_level*.  The root cgroup is at
 * 	*ancestor_level* zero and each step down the hierarchy
 * 	increments the level. If *ancestor_level* == level of cgroup
 * 	associated with *skb*, then return value will be same as that
 * 	of **bpf_skb_cgroup_id**\ ().
 *
 * 	The helper is useful to implement policies based on cgroups
 * 	that are upper in hierarchy than immediate cgroup associated
 * 	with *skb*.
 *
 * 	The format of returned id and helper limitations are same as in
 * 	**bpf_skb_cgroup_id**\ ().
 *
 * Returns
 * 	The id is returned or 0 in case the id could not be retrieved.
 */
static __u64 (*bpf_skb_ancestor_cgroup_id)(struct __sk_buff *skb, int ancestor_level) = (void *) 83;

/*
 * bpf_sk_lookup_tcp
 *
 * 	Look for TCP socket matching *tuple*, optionally in a child
 * 	network namespace *netns*. The return value must be checked,
 * 	and if non-**NULL**, released via **bpf_sk_release**\ ().
 *
 * 	The *ctx* should point to the context of the program, such as
 * 	the skb or socket (depending on the hook in use). This is used
 * 	to determine the base network namespace for the lookup.
 *
 * 	*tuple_size* must be one of:
 *
 * 	**sizeof**\ (*tuple*\ **->ipv4**)
 * 		Look for an IPv4 socket.
 * 	**sizeof**\ (*tuple*\ **->ipv6**)
 * 		Look for an IPv6 socket.
 *
 * 	If the *netns* is a negative signed 32-bit integer, then the
 * 	socket lookup table in the netns associated with the *ctx*
 * 	will be used. For the TC hooks, this is the netns of the device
 * 	in the skb. For socket hooks, this is the netns of the socket.
 * 	If *netns* is any other signed 32-bit value greater than or
 * 	equal to zero then it specifies the ID of the netns relative to
 * 	the netns associated with the *ctx*. *netns* values beyond the
 * 	range of 32-bit integers are reserved for future use.
 *
 * 	All values for *flags* are reserved for future usage, and must
 * 	be left at zero.
 *
 * 	This helper is available only if the kernel was compiled with
 * 	**CONFIG_NET** configuration option.
 *
 * Returns
 * 	Pointer to **struct bpf_sock**, or **NULL** in case of failure.
 * 	For sockets with reuseport option, the **struct bpf_sock**
 * 	result is from *reuse*\ **->socks**\ [] using the hash of the
 * 	tuple.
 */
static struct bpf_sock *(*bpf_sk_lookup_tcp)(void *ctx, struct bpf_sock_tuple *tuple, __u32 tuple_size, __u64 netns, __u64 flags) = (void *) 84;

/*
 * bpf_sk_lookup_udp
 *
 * 	Look for UDP socket matching *tuple*, optionally in a child
 * 	network namespace *netns*. The return value must be checked,
 * 	and if non-**NULL**, released via **bpf_sk_release**\ ().
 *
 * 	The *ctx* should point to the context of the program, such as
 * 	the skb or socket (depending on the hook in use). This is used
 * 	to determine the base network namespace for the lookup.
 *
 * 	*tuple_size* must be one of:
 *
 * 	**sizeof**\ (*tuple*\ **->ipv4**)
 * 		Look for an IPv4 socket.
 * 	**sizeof**\ (*tuple*\ **->ipv6**)
 * 		Look for an IPv6 socket.
 *
 * 	If the *netns* is a negative signed 32-bit integer, then the
 * 	socket lookup table in the netns associated with the *ctx*
 * 	will be used. For the TC hooks, this is the netns of the device
 * 	in the skb. For socket hooks, this is the netns of the socket.
 * 	If *netns* is any other signed 32-bit value greater than or
 * 	equal to zero then it specifies the ID of the netns relative to
 * 	the netns associated with the *ctx*. *netns* values beyond the
 * 	range of 32-bit integers are reserved for future use.
 *
 * 	All values for *flags* are reserved for future usage, and must
 * 	be left at zero.
 *
 * 	This helper is available only if the kernel was compiled with
 * 	**CONFIG_NET** configuration option.
 *
 * Returns
 * 	Pointer to **struct bpf_sock**, or **NULL** in case of failure.
 * 	For sockets with reuseport option, the **struct bpf_sock**
 * 	result is from *reuse*\ **->socks**\ [] using the hash of the
 * 	tuple.
 */
static struct bpf_sock *(*bpf_sk_lookup_udp)(void *ctx, struct bpf_sock_tuple *tuple, __u32 tuple_size, __u64 netns, __u64 flags) = (void *) 85;

/*
 * bpf_sk_release
 *
 * 	Release the reference held by *sock*. *sock* must be a
 * 	non-**NULL** pointer that was returned from
 * 	**bpf_sk_lookup_xxx**\ ().
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_sk_release)(struct bpf_sock *sock) = (void *) 86;

/*
 * bpf_map_push_elem
 *
 * 	Push an element *value* in *map*. *flags* is one of:
 *
 * 	**BPF_EXIST**
 * 		If the queue/stack is full, the oldest element is
 * 		removed to make room for this.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_map_push_elem)(void *map, const void *value, __u64 flags) = (void *) 87;

/*
 * bpf_map_pop_elem
 *
 * 	Pop an element from *map*.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_map_pop_elem)(void *map, void *value) = (void *) 88;

/*
 * bpf_map_peek_elem
 *
 * 	Get an element from *map* without removing it.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_map_peek_elem)(void *map, void *value) = (void *) 89;

/*
 * bpf_msg_push_data
 *
 * 	For socket policies, insert *len* bytes into *msg* at offset
 * 	*start*.
 *
 * 	If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a
 * 	*msg* it may want to insert metadata or options into the *msg*.
 * 	This can later be read and used by any of the lower layer BPF
 * 	hooks.
 *
 * 	This helper may fail if under memory pressure (a malloc
 * 	fails) in these cases BPF programs will get an appropriate
 * 	error and BPF programs will need to handle them.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_msg_push_data)(struct sk_msg_md *msg, __u32 start, __u32 len, __u64 flags) = (void *) 90;

/*
 * bpf_msg_pop_data
 *
 * 	Will remove *len* bytes from a *msg* starting at byte *start*.
 * 	This may result in **ENOMEM** errors under certain situations if
 * 	an allocation and copy are required due to a full ring buffer.
 * 	However, the helper will try to avoid doing the allocation
 * 	if possible. Other errors can occur if input parameters are
 * 	invalid either due to *start* byte not being valid part of *msg*
 * 	payload and/or *pop* value being to large.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_msg_pop_data)(struct sk_msg_md *msg, __u32 start, __u32 len, __u64 flags) = (void *) 91;

/*
 * bpf_rc_pointer_rel
 *
 * 	This helper is used in programs implementing IR decoding, to
 * 	report a successfully decoded pointer movement.
 *
 * 	The *ctx* should point to the lirc sample as passed into
 * 	the program.
 *
 * 	This helper is only available is the kernel was compiled with
 * 	the **CONFIG_BPF_LIRC_MODE2** configuration option set to
 * 	"**y**".
 *
 * Returns
 * 	0
 */
static long (*bpf_rc_pointer_rel)(void *ctx, __s32 rel_x, __s32 rel_y) = (void *) 92;

/*
 * bpf_spin_lock
 *
 * 	Acquire a spinlock represented by the pointer *lock*, which is
 * 	stored as part of a value of a map. Taking the lock allows to
 * 	safely update the rest of the fields in that value. The
 * 	spinlock can (and must) later be released with a call to
 * 	**bpf_spin_unlock**\ (\ *lock*\ ).
 *
 * 	Spinlocks in BPF programs come with a number of restrictions
 * 	and constraints:
 *
 * 	* **bpf_spin_lock** objects are only allowed inside maps of
 * 	  types **BPF_MAP_TYPE_HASH** and **BPF_MAP_TYPE_ARRAY** (this
 * 	  list could be extended in the future).
 * 	* BTF description of the map is mandatory.
 * 	* The BPF program can take ONE lock at a time, since taking two
 * 	  or more could cause dead locks.
 * 	* Only one **struct bpf_spin_lock** is allowed per map element.
 * 	* When the lock is taken, calls (either BPF to BPF or helpers)
 * 	  are not allowed.
 * 	* The **BPF_LD_ABS** and **BPF_LD_IND** instructions are not
 * 	  allowed inside a spinlock-ed region.
 * 	* The BPF program MUST call **bpf_spin_unlock**\ () to release
 * 	  the lock, on all execution paths, before it returns.
 * 	* The BPF program can access **struct bpf_spin_lock** only via
 * 	  the **bpf_spin_lock**\ () and **bpf_spin_unlock**\ ()
 * 	  helpers. Loading or storing data into the **struct
 * 	  bpf_spin_lock** *lock*\ **;** field of a map is not allowed.
 * 	* To use the **bpf_spin_lock**\ () helper, the BTF description
 * 	  of the map value must be a struct and have **struct
 * 	  bpf_spin_lock** *anyname*\ **;** field at the top level.
 * 	  Nested lock inside another struct is not allowed.
 * 	* The **struct bpf_spin_lock** *lock* field in a map value must
 * 	  be aligned on a multiple of 4 bytes in that value.
 * 	* Syscall with command **BPF_MAP_LOOKUP_ELEM** does not copy
 * 	  the **bpf_spin_lock** field to user space.
 * 	* Syscall with command **BPF_MAP_UPDATE_ELEM**, or update from
 * 	  a BPF program, do not update the **bpf_spin_lock** field.
 * 	* **bpf_spin_lock** cannot be on the stack or inside a
 * 	  networking packet (it can only be inside of a map values).
 * 	* **bpf_spin_lock** is available to root only.
 * 	* Tracing programs and socket filter programs cannot use
 * 	  **bpf_spin_lock**\ () due to insufficient preemption checks
 * 	  (but this may change in the future).
 * 	* **bpf_spin_lock** is not allowed in inner maps of map-in-map.
 *
 * Returns
 * 	0
 */
static long (*bpf_spin_lock)(struct bpf_spin_lock *lock) = (void *) 93;

/*
 * bpf_spin_unlock
 *
 * 	Release the *lock* previously locked by a call to
 * 	**bpf_spin_lock**\ (\ *lock*\ ).
 *
 * Returns
 * 	0
 */
static long (*bpf_spin_unlock)(struct bpf_spin_lock *lock) = (void *) 94;

/*
 * bpf_sk_fullsock
 *
 * 	This helper gets a **struct bpf_sock** pointer such
 * 	that all the fields in this **bpf_sock** can be accessed.
 *
 * Returns
 * 	A **struct bpf_sock** pointer on success, or **NULL** in
 * 	case of failure.
 */
static struct bpf_sock *(*bpf_sk_fullsock)(struct bpf_sock *sk) = (void *) 95;

/*
 * bpf_tcp_sock
 *
 * 	This helper gets a **struct bpf_tcp_sock** pointer from a
 * 	**struct bpf_sock** pointer.
 *
 * Returns
 * 	A **struct bpf_tcp_sock** pointer on success, or **NULL** in
 * 	case of failure.
 */
static struct bpf_tcp_sock *(*bpf_tcp_sock)(struct bpf_sock *sk) = (void *) 96;

/*
 * bpf_skb_ecn_set_ce
 *
 * 	Set ECN (Explicit Congestion Notification) field of IP header
 * 	to **CE** (Congestion Encountered) if current value is **ECT**
 * 	(ECN Capable Transport). Otherwise, do nothing. Works with IPv6
 * 	and IPv4.
 *
 * Returns
 * 	1 if the **CE** flag is set (either by the current helper call
 * 	or because it was already present), 0 if it is not set.
 */
static long (*bpf_skb_ecn_set_ce)(struct __sk_buff *skb) = (void *) 97;

/*
 * bpf_get_listener_sock
 *
 * 	Return a **struct bpf_sock** pointer in **TCP_LISTEN** state.
 * 	**bpf_sk_release**\ () is unnecessary and not allowed.
 *
 * Returns
 * 	A **struct bpf_sock** pointer on success, or **NULL** in
 * 	case of failure.
 */
static struct bpf_sock *(*bpf_get_listener_sock)(struct bpf_sock *sk) = (void *) 98;

/*
 * bpf_skc_lookup_tcp
 *
 * 	Look for TCP socket matching *tuple*, optionally in a child
 * 	network namespace *netns*. The return value must be checked,
 * 	and if non-**NULL**, released via **bpf_sk_release**\ ().
 *
 * 	This function is identical to **bpf_sk_lookup_tcp**\ (), except
 * 	that it also returns timewait or request sockets. Use
 * 	**bpf_sk_fullsock**\ () or **bpf_tcp_sock**\ () to access the
 * 	full structure.
 *
 * 	This helper is available only if the kernel was compiled with
 * 	**CONFIG_NET** configuration option.
 *
 * Returns
 * 	Pointer to **struct bpf_sock**, or **NULL** in case of failure.
 * 	For sockets with reuseport option, the **struct bpf_sock**
 * 	result is from *reuse*\ **->socks**\ [] using the hash of the
 * 	tuple.
 */
static struct bpf_sock *(*bpf_skc_lookup_tcp)(void *ctx, struct bpf_sock_tuple *tuple, __u32 tuple_size, __u64 netns, __u64 flags) = (void *) 99;

/*
 * bpf_tcp_check_syncookie
 *
 * 	Check whether *iph* and *th* contain a valid SYN cookie ACK for
 * 	the listening socket in *sk*.
 *
 * 	*iph* points to the start of the IPv4 or IPv6 header, while
 * 	*iph_len* contains **sizeof**\ (**struct iphdr**) or
 * 	**sizeof**\ (**struct ip6hdr**).
 *
 * 	*th* points to the start of the TCP header, while *th_len*
 * 	contains **sizeof**\ (**struct tcphdr**).
 *
 * Returns
 * 	0 if *iph* and *th* are a valid SYN cookie ACK, or a negative
 * 	error otherwise.
 */
static long (*bpf_tcp_check_syncookie)(struct bpf_sock *sk, void *iph, __u32 iph_len, struct tcphdr *th, __u32 th_len) = (void *) 100;

/*
 * bpf_sysctl_get_name
 *
 * 	Get name of sysctl in /proc/sys/ and copy it into provided by
 * 	program buffer *buf* of size *buf_len*.
 *
 * 	The buffer is always NUL terminated, unless it's zero-sized.
 *
 * 	If *flags* is zero, full name (e.g. "net/ipv4/tcp_mem") is
 * 	copied. Use **BPF_F_SYSCTL_BASE_NAME** flag to copy base name
 * 	only (e.g. "tcp_mem").
 *
 * Returns
 * 	Number of character copied (not including the trailing NUL).
 *
 * 	**-E2BIG** if the buffer wasn't big enough (*buf* will contain
 * 	truncated name in this case).
 */
static long (*bpf_sysctl_get_name)(struct bpf_sysctl *ctx, char *buf, unsigned long buf_len, __u64 flags) = (void *) 101;

/*
 * bpf_sysctl_get_current_value
 *
 * 	Get current value of sysctl as it is presented in /proc/sys
 * 	(incl. newline, etc), and copy it as a string into provided
 * 	by program buffer *buf* of size *buf_len*.
 *
 * 	The whole value is copied, no matter what file position user
 * 	space issued e.g. sys_read at.
 *
 * 	The buffer is always NUL terminated, unless it's zero-sized.
 *
 * Returns
 * 	Number of character copied (not including the trailing NUL).
 *
 * 	**-E2BIG** if the buffer wasn't big enough (*buf* will contain
 * 	truncated name in this case).
 *
 * 	**-EINVAL** if current value was unavailable, e.g. because
 * 	sysctl is uninitialized and read returns -EIO for it.
 */
static long (*bpf_sysctl_get_current_value)(struct bpf_sysctl *ctx, char *buf, unsigned long buf_len) = (void *) 102;

/*
 * bpf_sysctl_get_new_value
 *
 * 	Get new value being written by user space to sysctl (before
 * 	the actual write happens) and copy it as a string into
 * 	provided by program buffer *buf* of size *buf_len*.
 *
 * 	User space may write new value at file position > 0.
 *
 * 	The buffer is always NUL terminated, unless it's zero-sized.
 *
 * Returns
 * 	Number of character copied (not including the trailing NUL).
 *
 * 	**-E2BIG** if the buffer wasn't big enough (*buf* will contain
 * 	truncated name in this case).
 *
 * 	**-EINVAL** if sysctl is being read.
 */
static long (*bpf_sysctl_get_new_value)(struct bpf_sysctl *ctx, char *buf, unsigned long buf_len) = (void *) 103;

/*
 * bpf_sysctl_set_new_value
 *
 * 	Override new value being written by user space to sysctl with
 * 	value provided by program in buffer *buf* of size *buf_len*.
 *
 * 	*buf* should contain a string in same form as provided by user
 * 	space on sysctl write.
 *
 * 	User space may write new value at file position > 0. To override
 * 	the whole sysctl value file position should be set to zero.
 *
 * Returns
 * 	0 on success.
 *
 * 	**-E2BIG** if the *buf_len* is too big.
 *
 * 	**-EINVAL** if sysctl is being read.
 */
static long (*bpf_sysctl_set_new_value)(struct bpf_sysctl *ctx, const char *buf, unsigned long buf_len) = (void *) 104;

/*
 * bpf_strtol
 *
 * 	Convert the initial part of the string from buffer *buf* of
 * 	size *buf_len* to a long integer according to the given base
 * 	and save the result in *res*.
 *
 * 	The string may begin with an arbitrary amount of white space
 * 	(as determined by **isspace**\ (3)) followed by a single
 * 	optional '**-**' sign.
 *
 * 	Five least significant bits of *flags* encode base, other bits
 * 	are currently unused.
 *
 * 	Base must be either 8, 10, 16 or 0 to detect it automatically
 * 	similar to user space **strtol**\ (3).
 *
 * Returns
 * 	Number of characters consumed on success. Must be positive but
 * 	no more than *buf_len*.
 *
 * 	**-EINVAL** if no valid digits were found or unsupported base
 * 	was provided.
 *
 * 	**-ERANGE** if resulting value was out of range.
 */
static long (*bpf_strtol)(const char *buf, unsigned long buf_len, __u64 flags, long *res) = (void *) 105;

/*
 * bpf_strtoul
 *
 * 	Convert the initial part of the string from buffer *buf* of
 * 	size *buf_len* to an unsigned long integer according to the
 * 	given base and save the result in *res*.
 *
 * 	The string may begin with an arbitrary amount of white space
 * 	(as determined by **isspace**\ (3)).
 *
 * 	Five least significant bits of *flags* encode base, other bits
 * 	are currently unused.
 *
 * 	Base must be either 8, 10, 16 or 0 to detect it automatically
 * 	similar to user space **strtoul**\ (3).
 *
 * Returns
 * 	Number of characters consumed on success. Must be positive but
 * 	no more than *buf_len*.
 *
 * 	**-EINVAL** if no valid digits were found or unsupported base
 * 	was provided.
 *
 * 	**-ERANGE** if resulting value was out of range.
 */
static long (*bpf_strtoul)(const char *buf, unsigned long buf_len, __u64 flags, unsigned long *res) = (void *) 106;

/*
 * bpf_sk_storage_get
 *
 * 	Get a bpf-local-storage from a *sk*.
 *
 * 	Logically, it could be thought of getting the value from
 * 	a *map* with *sk* as the **key**.  From this
 * 	perspective,  the usage is not much different from
 * 	**bpf_map_lookup_elem**\ (*map*, **&**\ *sk*) except this
 * 	helper enforces the key must be a full socket and the map must
 * 	be a **BPF_MAP_TYPE_SK_STORAGE** also.
 *
 * 	Underneath, the value is stored locally at *sk* instead of
 * 	the *map*.  The *map* is used as the bpf-local-storage
 * 	"type". The bpf-local-storage "type" (i.e. the *map*) is
 * 	searched against all bpf-local-storages residing at *sk*.
 *
 * 	An optional *flags* (**BPF_SK_STORAGE_GET_F_CREATE**) can be
 * 	used such that a new bpf-local-storage will be
 * 	created if one does not exist.  *value* can be used
 * 	together with **BPF_SK_STORAGE_GET_F_CREATE** to specify
 * 	the initial value of a bpf-local-storage.  If *value* is
 * 	**NULL**, the new bpf-local-storage will be zero initialized.
 *
 * Returns
 * 	A bpf-local-storage pointer is returned on success.
 *
 * 	**NULL** if not found or there was an error in adding
 * 	a new bpf-local-storage.
 */
static void *(*bpf_sk_storage_get)(void *map, struct bpf_sock *sk, void *value, __u64 flags) = (void *) 107;

/*
 * bpf_sk_storage_delete
 *
 * 	Delete a bpf-local-storage from a *sk*.
 *
 * Returns
 * 	0 on success.
 *
 * 	**-ENOENT** if the bpf-local-storage cannot be found.
 */
static long (*bpf_sk_storage_delete)(void *map, struct bpf_sock *sk) = (void *) 108;

/*
 * bpf_send_signal
 *
 * 	Send signal *sig* to the process of the current task.
 * 	The signal may be delivered to any of this process's threads.
 *
 * Returns
 * 	0 on success or successfully queued.
 *
 * 	**-EBUSY** if work queue under nmi is full.
 *
 * 	**-EINVAL** if *sig* is invalid.
 *
 * 	**-EPERM** if no permission to send the *sig*.
 *
 * 	**-EAGAIN** if bpf program can try again.
 */
static long (*bpf_send_signal)(__u32 sig) = (void *) 109;

/*
 * bpf_tcp_gen_syncookie
 *
 * 	Try to issue a SYN cookie for the packet with corresponding
 * 	IP/TCP headers, *iph* and *th*, on the listening socket in *sk*.
 *
 * 	*iph* points to the start of the IPv4 or IPv6 header, while
 * 	*iph_len* contains **sizeof**\ (**struct iphdr**) or
 * 	**sizeof**\ (**struct ip6hdr**).
 *
 * 	*th* points to the start of the TCP header, while *th_len*
 * 	contains the length of the TCP header.
 *
 * Returns
 * 	On success, lower 32 bits hold the generated SYN cookie in
 * 	followed by 16 bits which hold the MSS value for that cookie,
 * 	and the top 16 bits are unused.
 *
 * 	On failure, the returned value is one of the following:
 *
 * 	**-EINVAL** SYN cookie cannot be issued due to error
 *
 * 	**-ENOENT** SYN cookie should not be issued (no SYN flood)
 *
 * 	**-EOPNOTSUPP** kernel configuration does not enable SYN cookies
 *
 * 	**-EPROTONOSUPPORT** IP packet version is not 4 or 6
 */
static __s64 (*bpf_tcp_gen_syncookie)(struct bpf_sock *sk, void *iph, __u32 iph_len, struct tcphdr *th, __u32 th_len) = (void *) 110;

/*
 * bpf_skb_output
 *
 * 	Write raw *data* blob into a special BPF perf event held by
 * 	*map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf
 * 	event must have the following attributes: **PERF_SAMPLE_RAW**
 * 	as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and
 * 	**PERF_COUNT_SW_BPF_OUTPUT** as **config**.
 *
 * 	The *flags* are used to indicate the index in *map* for which
 * 	the value must be put, masked with **BPF_F_INDEX_MASK**.
 * 	Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU**
 * 	to indicate that the index of the current CPU core should be
 * 	used.
 *
 * 	The value to write, of *size*, is passed through eBPF stack and
 * 	pointed by *data*.
 *
 * 	*ctx* is a pointer to in-kernel struct sk_buff.
 *
 * 	This helper is similar to **bpf_perf_event_output**\ () but
 * 	restricted to raw_tracepoint bpf programs.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_skb_output)(void *ctx, void *map, __u64 flags, void *data, __u64 size) = (void *) 111;

/*
 * bpf_probe_read_user
 *
 * 	Safely attempt to read *size* bytes from user space address
 * 	*unsafe_ptr* and store the data in *dst*.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_probe_read_user)(void *dst, __u32 size, const void *unsafe_ptr) = (void *) 112;

/*
 * bpf_probe_read_kernel
 *
 * 	Safely attempt to read *size* bytes from kernel space address
 * 	*unsafe_ptr* and store the data in *dst*.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_probe_read_kernel)(void *dst, __u32 size, const void *unsafe_ptr) = (void *) 113;

/*
 * bpf_probe_read_user_str
 *
 * 	Copy a NUL terminated string from an unsafe user address
 * 	*unsafe_ptr* to *dst*. The *size* should include the
 * 	terminating NUL byte. In case the string length is smaller than
 * 	*size*, the target is not padded with further NUL bytes. If the
 * 	string length is larger than *size*, just *size*-1 bytes are
 * 	copied and the last byte is set to NUL.
 *
 * 	On success, the length of the copied string is returned. This
 * 	makes this helper useful in tracing programs for reading
 * 	strings, and more importantly to get its length at runtime. See
 * 	the following snippet:
 *
 * 	::
 *
 * 		SEC("kprobe/sys_open")
 * 		void bpf_sys_open(struct pt_regs *ctx)
 * 		{
 * 		        char buf[PATHLEN]; // PATHLEN is defined to 256
 * 		        int res = bpf_probe_read_user_str(buf, sizeof(buf),
 * 			                                  ctx->di);
 *
 * 			// Consume buf, for example push it to
 * 			// userspace via bpf_perf_event_output(); we
 * 			// can use res (the string length) as event
 * 			// size, after checking its boundaries.
 * 		}
 *
 * 	In comparison, using **bpf_probe_read_user**\ () helper here
 * 	instead to read the string would require to estimate the length
 * 	at compile time, and would often result in copying more memory
 * 	than necessary.
 *
 * 	Another useful use case is when parsing individual process
 * 	arguments or individual environment variables navigating
 * 	*current*\ **->mm->arg_start** and *current*\
 * 	**->mm->env_start**: using this helper and the return value,
 * 	one can quickly iterate at the right offset of the memory area.
 *
 * Returns
 * 	On success, the strictly positive length of the string,
 * 	including the trailing NUL character. On error, a negative
 * 	value.
 */
static long (*bpf_probe_read_user_str)(void *dst, __u32 size, const void *unsafe_ptr) = (void *) 114;

/*
 * bpf_probe_read_kernel_str
 *
 * 	Copy a NUL terminated string from an unsafe kernel address *unsafe_ptr*
 * 	to *dst*. Same semantics as with **bpf_probe_read_user_str**\ () apply.
 *
 * Returns
 * 	On success, the strictly positive length of the string, including
 * 	the trailing NUL character. On error, a negative value.
 */
static long (*bpf_probe_read_kernel_str)(void *dst, __u32 size, const void *unsafe_ptr) = (void *) 115;

/*
 * bpf_tcp_send_ack
 *
 * 	Send out a tcp-ack. *tp* is the in-kernel struct **tcp_sock**.
 * 	*rcv_nxt* is the ack_seq to be sent out.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_tcp_send_ack)(void *tp, __u32 rcv_nxt) = (void *) 116;

/*
 * bpf_send_signal_thread
 *
 * 	Send signal *sig* to the thread corresponding to the current task.
 *
 * Returns
 * 	0 on success or successfully queued.
 *
 * 	**-EBUSY** if work queue under nmi is full.
 *
 * 	**-EINVAL** if *sig* is invalid.
 *
 * 	**-EPERM** if no permission to send the *sig*.
 *
 * 	**-EAGAIN** if bpf program can try again.
 */
static long (*bpf_send_signal_thread)(__u32 sig) = (void *) 117;

/*
 * bpf_jiffies64
 *
 * 	Obtain the 64bit jiffies
 *
 * Returns
 * 	The 64 bit jiffies
 */
static __u64 (*bpf_jiffies64)(void) = (void *) 118;

/*
 * bpf_read_branch_records
 *
 * 	For an eBPF program attached to a perf event, retrieve the
 * 	branch records (**struct perf_branch_entry**) associated to *ctx*
 * 	and store it in the buffer pointed by *buf* up to size
 * 	*size* bytes.
 *
 * Returns
 * 	On success, number of bytes written to *buf*. On error, a
 * 	negative value.
 *
 * 	The *flags* can be set to **BPF_F_GET_BRANCH_RECORDS_SIZE** to
 * 	instead return the number of bytes required to store all the
 * 	branch entries. If this flag is set, *buf* may be NULL.
 *
 * 	**-EINVAL** if arguments invalid or **size** not a multiple
 * 	of **sizeof**\ (**struct perf_branch_entry**\ ).
 *
 * 	**-ENOENT** if architecture does not support branch records.
 */
static long (*bpf_read_branch_records)(struct bpf_perf_event_data *ctx, void *buf, __u32 size, __u64 flags) = (void *) 119;

/*
 * bpf_get_ns_current_pid_tgid
 *
 * 	Returns 0 on success, values for *pid* and *tgid* as seen from the current
 * 	*namespace* will be returned in *nsdata*.
 *
 * Returns
 * 	0 on success, or one of the following in case of failure:
 *
 * 	**-EINVAL** if dev and inum supplied don't match dev_t and inode number
 * 	with nsfs of current task, or if dev conversion to dev_t lost high bits.
 *
 * 	**-ENOENT** if pidns does not exists for the current task.
 */
static long (*bpf_get_ns_current_pid_tgid)(__u64 dev, __u64 ino, struct bpf_pidns_info *nsdata, __u32 size) = (void *) 120;

/*
 * bpf_xdp_output
 *
 * 	Write raw *data* blob into a special BPF perf event held by
 * 	*map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf
 * 	event must have the following attributes: **PERF_SAMPLE_RAW**
 * 	as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and
 * 	**PERF_COUNT_SW_BPF_OUTPUT** as **config**.
 *
 * 	The *flags* are used to indicate the index in *map* for which
 * 	the value must be put, masked with **BPF_F_INDEX_MASK**.
 * 	Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU**
 * 	to indicate that the index of the current CPU core should be
 * 	used.
 *
 * 	The value to write, of *size*, is passed through eBPF stack and
 * 	pointed by *data*.
 *
 * 	*ctx* is a pointer to in-kernel struct xdp_buff.
 *
 * 	This helper is similar to **bpf_perf_eventoutput**\ () but
 * 	restricted to raw_tracepoint bpf programs.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_xdp_output)(void *ctx, void *map, __u64 flags, void *data, __u64 size) = (void *) 121;

/*
 * bpf_get_netns_cookie
 *
 * 	Retrieve the cookie (generated by the kernel) of the network
 * 	namespace the input *ctx* is associated with. The network
 * 	namespace cookie remains stable for its lifetime and provides
 * 	a global identifier that can be assumed unique. If *ctx* is
 * 	NULL, then the helper returns the cookie for the initial
 * 	network namespace. The cookie itself is very similar to that
 * 	of **bpf_get_socket_cookie**\ () helper, but for network
 * 	namespaces instead of sockets.
 *
 * Returns
 * 	A 8-byte long opaque number.
 */
static __u64 (*bpf_get_netns_cookie)(void *ctx) = (void *) 122;

/*
 * bpf_get_current_ancestor_cgroup_id
 *
 * 	Return id of cgroup v2 that is ancestor of the cgroup associated
 * 	with the current task at the *ancestor_level*. The root cgroup
 * 	is at *ancestor_level* zero and each step down the hierarchy
 * 	increments the level. If *ancestor_level* == level of cgroup
 * 	associated with the current task, then return value will be the
 * 	same as that of **bpf_get_current_cgroup_id**\ ().
 *
 * 	The helper is useful to implement policies based on cgroups
 * 	that are upper in hierarchy than immediate cgroup associated
 * 	with the current task.
 *
 * 	The format of returned id and helper limitations are same as in
 * 	**bpf_get_current_cgroup_id**\ ().
 *
 * Returns
 * 	The id is returned or 0 in case the id could not be retrieved.
 */
static __u64 (*bpf_get_current_ancestor_cgroup_id)(int ancestor_level) = (void *) 123;

/*
 * bpf_sk_assign
 *
 * 	Helper is overloaded depending on BPF program type. This
 * 	description applies to **BPF_PROG_TYPE_SCHED_CLS** and
 * 	**BPF_PROG_TYPE_SCHED_ACT** programs.
 *
 * 	Assign the *sk* to the *skb*. When combined with appropriate
 * 	routing configuration to receive the packet towards the socket,
 * 	will cause *skb* to be delivered to the specified socket.
 * 	Subsequent redirection of *skb* via  **bpf_redirect**\ (),
 * 	**bpf_clone_redirect**\ () or other methods outside of BPF may
 * 	interfere with successful delivery to the socket.
 *
 * 	This operation is only valid from TC ingress path.
 *
 * 	The *flags* argument must be zero.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure:
 *
 * 	**-EINVAL** if specified *flags* are not supported.
 *
 * 	**-ENOENT** if the socket is unavailable for assignment.
 *
 * 	**-ENETUNREACH** if the socket is unreachable (wrong netns).
 *
 * 	**-EOPNOTSUPP** if the operation is not supported, for example
 * 	a call from outside of TC ingress.
 *
 * 	**-ESOCKTNOSUPPORT** if the socket type is not supported
 * 	(reuseport).
 */
static long (*bpf_sk_assign)(void *ctx, struct bpf_sock *sk, __u64 flags) = (void *) 124;

/*
 * bpf_ktime_get_boot_ns
 *
 * 	Return the time elapsed since system boot, in nanoseconds.
 * 	Does include the time the system was suspended.
 * 	See: **clock_gettime**\ (**CLOCK_BOOTTIME**)
 *
 * Returns
 * 	Current *ktime*.
 */
static __u64 (*bpf_ktime_get_boot_ns)(void) = (void *) 125;

/*
 * bpf_seq_printf
 *
 * 	**bpf_seq_printf**\ () uses seq_file **seq_printf**\ () to print
 * 	out the format string.
 * 	The *m* represents the seq_file. The *fmt* and *fmt_size* are for
 * 	the format string itself. The *data* and *data_len* are format string
 * 	arguments. The *data* are a **u64** array and corresponding format string
 * 	values are stored in the array. For strings and pointers where pointees
 * 	are accessed, only the pointer values are stored in the *data* array.
 * 	The *data_len* is the size of *data* in bytes.
 *
 * 	Formats **%s**, **%p{i,I}{4,6}** requires to read kernel memory.
 * 	Reading kernel memory may fail due to either invalid address or
 * 	valid address but requiring a major memory fault. If reading kernel memory
 * 	fails, the string for **%s** will be an empty string, and the ip
 * 	address for **%p{i,I}{4,6}** will be 0. Not returning error to
 * 	bpf program is consistent with what **bpf_trace_printk**\ () does for now.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure:
 *
 * 	**-EBUSY** if per-CPU memory copy buffer is busy, can try again
 * 	by returning 1 from bpf program.
 *
 * 	**-EINVAL** if arguments are invalid, or if *fmt* is invalid/unsupported.
 *
 * 	**-E2BIG** if *fmt* contains too many format specifiers.
 *
 * 	**-EOVERFLOW** if an overflow happened: The same object will be tried again.
 */
static long (*bpf_seq_printf)(struct seq_file *m, const char *fmt, __u32 fmt_size, const void *data, __u32 data_len) = (void *) 126;

/*
 * bpf_seq_write
 *
 * 	**bpf_seq_write**\ () uses seq_file **seq_write**\ () to write the data.
 * 	The *m* represents the seq_file. The *data* and *len* represent the
 * 	data to write in bytes.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure:
 *
 * 	**-EOVERFLOW** if an overflow happened: The same object will be tried again.
 */
static long (*bpf_seq_write)(struct seq_file *m, const void *data, __u32 len) = (void *) 127;

/*
 * bpf_sk_cgroup_id
 *
 * 	Return the cgroup v2 id of the socket *sk*.
 *
 * 	*sk* must be a non-**NULL** pointer to a full socket, e.g. one
 * 	returned from **bpf_sk_lookup_xxx**\ (),
 * 	**bpf_sk_fullsock**\ (), etc. The format of returned id is
 * 	same as in **bpf_skb_cgroup_id**\ ().
 *
 * 	This helper is available only if the kernel was compiled with
 * 	the **CONFIG_SOCK_CGROUP_DATA** configuration option.
 *
 * Returns
 * 	The id is returned or 0 in case the id could not be retrieved.
 */
static __u64 (*bpf_sk_cgroup_id)(struct bpf_sock *sk) = (void *) 128;

/*
 * bpf_sk_ancestor_cgroup_id
 *
 * 	Return id of cgroup v2 that is ancestor of cgroup associated
 * 	with the *sk* at the *ancestor_level*.  The root cgroup is at
 * 	*ancestor_level* zero and each step down the hierarchy
 * 	increments the level. If *ancestor_level* == level of cgroup
 * 	associated with *sk*, then return value will be same as that
 * 	of **bpf_sk_cgroup_id**\ ().
 *
 * 	The helper is useful to implement policies based on cgroups
 * 	that are upper in hierarchy than immediate cgroup associated
 * 	with *sk*.
 *
 * 	The format of returned id and helper limitations are same as in
 * 	**bpf_sk_cgroup_id**\ ().
 *
 * Returns
 * 	The id is returned or 0 in case the id could not be retrieved.
 */
static __u64 (*bpf_sk_ancestor_cgroup_id)(struct bpf_sock *sk, int ancestor_level) = (void *) 129;

/*
 * bpf_ringbuf_output
 *
 * 	Copy *size* bytes from *data* into a ring buffer *ringbuf*.
 * 	If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification
 * 	of new data availability is sent.
 * 	If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification
 * 	of new data availability is sent unconditionally.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure.
 */
static long (*bpf_ringbuf_output)(void *ringbuf, void *data, __u64 size, __u64 flags) = (void *) 130;

/*
 * bpf_ringbuf_reserve
 *
 * 	Reserve *size* bytes of payload in a ring buffer *ringbuf*.
 *
 * Returns
 * 	Valid pointer with *size* bytes of memory available; NULL,
 * 	otherwise.
 */
static void *(*bpf_ringbuf_reserve)(void *ringbuf, __u64 size, __u64 flags) = (void *) 131;

/*
 * bpf_ringbuf_submit
 *
 * 	Submit reserved ring buffer sample, pointed to by *data*.
 * 	If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification
 * 	of new data availability is sent.
 * 	If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification
 * 	of new data availability is sent unconditionally.
 *
 * Returns
 * 	Nothing. Always succeeds.
 */
static void (*bpf_ringbuf_submit)(void *data, __u64 flags) = (void *) 132;

/*
 * bpf_ringbuf_discard
 *
 * 	Discard reserved ring buffer sample, pointed to by *data*.
 * 	If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification
 * 	of new data availability is sent.
 * 	If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification
 * 	of new data availability is sent unconditionally.
 *
 * Returns
 * 	Nothing. Always succeeds.
 */
static void (*bpf_ringbuf_discard)(void *data, __u64 flags) = (void *) 133;

/*
 * bpf_ringbuf_query
 *
 * 	Query various characteristics of provided ring buffer. What
 * 	exactly is queries is determined by *flags*:
 *
 * 	* **BPF_RB_AVAIL_DATA**: Amount of data not yet consumed.
 * 	* **BPF_RB_RING_SIZE**: The size of ring buffer.
 * 	* **BPF_RB_CONS_POS**: Consumer position (can wrap around).
 * 	* **BPF_RB_PROD_POS**: Producer(s) position (can wrap around).
 *
 * 	Data returned is just a momentary snapshot of actual values
 * 	and could be inaccurate, so this facility should be used to
 * 	power heuristics and for reporting, not to make 100% correct
 * 	calculation.
 *
 * Returns
 * 	Requested value, or 0, if *flags* are not recognized.
 */
static __u64 (*bpf_ringbuf_query)(void *ringbuf, __u64 flags) = (void *) 134;

/*
 * bpf_csum_level
 *
 * 	Change the skbs checksum level by one layer up or down, or
 * 	reset it entirely to none in order to have the stack perform
 * 	checksum validation. The level is applicable to the following
 * 	protocols: TCP, UDP, GRE, SCTP, FCOE. For example, a decap of
 * 	| ETH | IP | UDP | GUE | IP | TCP | into | ETH | IP | TCP |
 * 	through **bpf_skb_adjust_room**\ () helper with passing in
 * 	**BPF_F_ADJ_ROOM_NO_CSUM_RESET** flag would require one	call
 * 	to **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_DEC** since
 * 	the UDP header is removed. Similarly, an encap of the latter
 * 	into the former could be accompanied by a helper call to
 * 	**bpf_csum_level**\ () with **BPF_CSUM_LEVEL_INC** if the
 * 	skb is still intended to be processed in higher layers of the
 * 	stack instead of just egressing at tc.
 *
 * 	There are three supported level settings at this time:
 *
 * 	* **BPF_CSUM_LEVEL_INC**: Increases skb->csum_level for skbs
 * 	  with CHECKSUM_UNNECESSARY.
 * 	* **BPF_CSUM_LEVEL_DEC**: Decreases skb->csum_level for skbs
 * 	  with CHECKSUM_UNNECESSARY.
 * 	* **BPF_CSUM_LEVEL_RESET**: Resets skb->csum_level to 0 and
 * 	  sets CHECKSUM_NONE to force checksum validation by the stack.
 * 	* **BPF_CSUM_LEVEL_QUERY**: No-op, returns the current
 * 	  skb->csum_level.
 *
 * Returns
 * 	0 on success, or a negative error in case of failure. In the
 * 	case of **BPF_CSUM_LEVEL_QUERY**, the current skb->csum_level
 * 	is returned or the error code -EACCES in case the skb is not
 * 	subject to CHECKSUM_UNNECESSARY.
 */
static long (*bpf_csum_level)(struct __sk_buff *skb, __u64 level) = (void *) 135;

/*
 * bpf_skc_to_tcp6_sock
 *
 * 	Dynamically cast a *sk* pointer to a *tcp6_sock* pointer.
 *
 * Returns
 * 	*sk* if casting is valid, or NULL otherwise.
 */
static struct tcp6_sock *(*bpf_skc_to_tcp6_sock)(void *sk) = (void *) 136;

/*
 * bpf_skc_to_tcp_sock
 *
 * 	Dynamically cast a *sk* pointer to a *tcp_sock* pointer.
 *
 * Returns
 * 	*sk* if casting is valid, or NULL otherwise.
 */
static struct tcp_sock *(*bpf_skc_to_tcp_sock)(void *sk) = (void *) 137;

/*
 * bpf_skc_to_tcp_timewait_sock
 *
 * 	Dynamically cast a *sk* pointer to a *tcp_timewait_sock* pointer.
 *
 * Returns
 * 	*sk* if casting is valid, or NULL otherwise.
 */
static struct tcp_timewait_sock *(*bpf_skc_to_tcp_timewait_sock)(void *sk) = (void *) 138;

/*
 * bpf_skc_to_tcp_request_sock
 *
 * 	Dynamically cast a *sk* pointer to a *tcp_request_sock* pointer.
 *
 * Returns
 * 	*sk* if casting is valid, or NULL otherwise.
 */
static struct tcp_request_sock *(*bpf_skc_to_tcp_request_sock)(void *sk) = (void *) 139;

/*
 * bpf_skc_to_udp6_sock
 *
 * 	Dynamically cast a *sk* pointer to a *udp6_sock* pointer.
 *
 * Returns
 * 	*sk* if casting is valid, or NULL otherwise.
 */
static struct udp6_sock *(*bpf_skc_to_udp6_sock)(void *sk) = (void *) 140;

/*
 * bpf_get_task_stack
 *
 * 	Return a user or a kernel stack in bpf program provided buffer.
 * 	To achieve this, the helper needs *task*, which is a valid
 * 	pointer to struct task_struct. To store the stacktrace, the
 * 	bpf program provides *buf* with	a nonnegative *size*.
 *
 * 	The last argument, *flags*, holds the number of stack frames to
 * 	skip (from 0 to 255), masked with
 * 	**BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set
 * 	the following flags:
 *
 * 	**BPF_F_USER_STACK**
 * 		Collect a user space stack instead of a kernel stack.
 * 	**BPF_F_USER_BUILD_ID**
 * 		Collect buildid+offset instead of ips for user stack,
 * 		only valid if **BPF_F_USER_STACK** is also specified.
 *
 * 	**bpf_get_task_stack**\ () can collect up to
 * 	**PERF_MAX_STACK_DEPTH** both kernel and user frames, subject
 * 	to sufficient large buffer size. Note that
 * 	this limit can be controlled with the **sysctl** program, and
 * 	that it should be manually increased in order to profile long
 * 	user stacks (such as stacks for Java programs). To do so, use:
 *
 * 	::
 *
 * 		# sysctl kernel.perf_event_max_stack=<new value>
 *
 * Returns
 * 	A non-negative value equal to or less than *size* on success,
 * 	or a negative error in case of failure.
 */
static long (*bpf_get_task_stack)(struct task_struct *task, void *buf, __u32 size, __u64 flags) = (void *) 141;