/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* */ /* This file is part of the program and library */ /* SCIP --- Solving Constraint Integer Programs */ /* */ /* Copyright 2002-2022 Zuse Institute Berlin */ /* */ /* Licensed under the Apache License, Version 2.0 (the "License"); */ /* you may not use this file except in compliance with the License. */ /* You may obtain a copy of the License at */ /* */ /* http://www.apache.org/licenses/LICENSE-2.0 */ /* */ /* Unless required by applicable law or agreed to in writing, software */ /* distributed under the License is distributed on an "AS IS" BASIS, */ /* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */ /* See the License for the specific language governing permissions and */ /* limitations under the License. */ /* */ /* You should have received a copy of the Apache-2.0 license */ /* along with SCIP; see the file LICENSE. If not visit scipopt.org. */ /* */ /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /**@file set.h * @ingroup INTERNALAPI * @brief internal methods for global SCIP settings * @author Tobias Achterberg * @author Timo Berthold */ /*---+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8----+----9----+----0----+----1----+----2*/ #ifndef __SCIP_SET_H__ #define __SCIP_SET_H__ #include "scip/def.h" #include "blockmemshell/memory.h" #include "scip/type_bandit.h" #include "scip/type_set.h" #include "scip/type_stat.h" #include "scip/type_clock.h" #include "scip/type_paramset.h" #include "scip/type_event.h" #include "scip/type_scip.h" #include "scip/type_branch.h" #include "scip/type_conflict.h" #include "scip/type_cons.h" #include "scip/type_disp.h" #include "scip/type_heur.h" #include "scip/type_compr.h" #include "scip/type_nodesel.h" #include "scip/type_presol.h" #include "scip/type_pricer.h" #include "scip/type_reader.h" #include "scip/type_relax.h" #include "scip/type_sepa.h" #include "scip/type_table.h" #include "scip/type_prop.h" #include "scip/type_benders.h" #include "scip/struct_set.h" #ifdef NDEBUG #include "scip/pub_misc.h" #endif #ifdef __cplusplus extern "C" { #endif /** copies plugins from sourcescip to targetscip; in case that a constraint handler which does not need constraints * cannot be copied, valid will return FALSE. All plugins can declare that, if their copy process failed, the * copied SCIP instance might not represent the same problem semantics as the original. * Note that in this case dual reductions might be invalid. */ SCIP_RETCODE SCIPsetCopyPlugins( SCIP_SET* sourceset, /**< source SCIP_SET data structure */ SCIP_SET* targetset, /**< target SCIP_SET data structure */ SCIP_Bool copyreaders, /**< should the file readers be copied */ SCIP_Bool copypricers, /**< should the variable pricers be copied */ SCIP_Bool copyconshdlrs, /**< should the constraint handlers be copied */ SCIP_Bool copyconflicthdlrs, /**< should the conflict handlers be copied */ SCIP_Bool copypresolvers, /**< should the presolvers be copied */ SCIP_Bool copyrelaxators, /**< should the relaxators be copied */ SCIP_Bool copyseparators, /**< should the separators be copied */ SCIP_Bool copycutselectors, /**< should the cut selectors be copied */ SCIP_Bool copypropagators, /**< should the propagators be copied */ SCIP_Bool copyheuristics, /**< should the heuristics be copied */ SCIP_Bool copyeventhdlrs, /**< should the event handlers be copied */ SCIP_Bool copynodeselectors, /**< should the node selectors be copied */ SCIP_Bool copybranchrules, /**< should the branchrules be copied */ SCIP_Bool copydisplays, /**< should the display columns be copied */ SCIP_Bool copydialogs, /**< should the dialogs be copied */ SCIP_Bool copytables, /**< should the statistics tables be copied */ SCIP_Bool copyexprhdlrs, /**< should the expression handlers be copied */ SCIP_Bool copynlpis, /**< should the NLP interfaces be copied */ SCIP_Bool* allvalid /**< pointer to store whether all plugins were validly copied */ ); /** copies parameters from sourcescip to targetscip */ SCIP_RETCODE SCIPsetCopyParams( SCIP_SET* sourceset, /**< source SCIP_SET data structure */ SCIP_SET* targetset, /**< target SCIP_SET data structure */ SCIP_MESSAGEHDLR* messagehdlr /**< message handler of target SCIP */ ); /** creates global SCIP settings */ SCIP_RETCODE SCIPsetCreate( SCIP_SET** set, /**< pointer to SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ BMS_BLKMEM* blkmem, /**< block memory */ SCIP* scip /**< SCIP data structure */ ); /** frees global SCIP settings */ SCIP_RETCODE SCIPsetFree( SCIP_SET** set, /**< pointer to SCIP settings */ BMS_BLKMEM* blkmem /**< block memory */ ); /** returns current stage of SCIP */ SCIP_STAGE SCIPsetGetStage( SCIP_SET* set /**< pointer to SCIP settings */ ); /** creates a SCIP_Bool parameter, sets it to its default value, and adds it to the parameter set */ SCIP_RETCODE SCIPsetAddBoolParam( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ BMS_BLKMEM* blkmem, /**< block memory */ const char* name, /**< name of the parameter */ const char* desc, /**< description of the parameter */ SCIP_Bool* valueptr, /**< pointer to store the current parameter value, or NULL */ SCIP_Bool isadvanced, /**< is this parameter an advanced parameter? */ SCIP_Bool defaultvalue, /**< default value of the parameter */ SCIP_DECL_PARAMCHGD ((*paramchgd)), /**< change information method of parameter */ SCIP_PARAMDATA* paramdata /**< locally defined parameter specific data */ ); /** creates a int parameter, sets it to its default value, and adds it to the parameter set */ SCIP_RETCODE SCIPsetAddIntParam( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ BMS_BLKMEM* blkmem, /**< block memory */ const char* name, /**< name of the parameter */ const char* desc, /**< description of the parameter */ int* valueptr, /**< pointer to store the current parameter value, or NULL */ SCIP_Bool isadvanced, /**< is this parameter an advanced parameter? */ int defaultvalue, /**< default value of the parameter */ int minvalue, /**< minimum value for parameter */ int maxvalue, /**< maximum value for parameter */ SCIP_DECL_PARAMCHGD ((*paramchgd)), /**< change information method of parameter */ SCIP_PARAMDATA* paramdata /**< locally defined parameter specific data */ ); /** creates a SCIP_Longint parameter, sets it to its default value, and adds it to the parameter set */ SCIP_RETCODE SCIPsetAddLongintParam( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ BMS_BLKMEM* blkmem, /**< block memory */ const char* name, /**< name of the parameter */ const char* desc, /**< description of the parameter */ SCIP_Longint* valueptr, /**< pointer to store the current parameter value, or NULL */ SCIP_Bool isadvanced, /**< is this parameter an advanced parameter? */ SCIP_Longint defaultvalue, /**< default value of the parameter */ SCIP_Longint minvalue, /**< minimum value for parameter */ SCIP_Longint maxvalue, /**< maximum value for parameter */ SCIP_DECL_PARAMCHGD ((*paramchgd)), /**< change information method of parameter */ SCIP_PARAMDATA* paramdata /**< locally defined parameter specific data */ ); /** creates a SCIP_Real parameter, sets it to its default value, and adds it to the parameter set */ SCIP_RETCODE SCIPsetAddRealParam( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ BMS_BLKMEM* blkmem, /**< block memory */ const char* name, /**< name of the parameter */ const char* desc, /**< description of the parameter */ SCIP_Real* valueptr, /**< pointer to store the current parameter value, or NULL */ SCIP_Bool isadvanced, /**< is this parameter an advanced parameter? */ SCIP_Real defaultvalue, /**< default value of the parameter */ SCIP_Real minvalue, /**< minimum value for parameter */ SCIP_Real maxvalue, /**< maximum value for parameter */ SCIP_DECL_PARAMCHGD ((*paramchgd)), /**< change information method of parameter */ SCIP_PARAMDATA* paramdata /**< locally defined parameter specific data */ ); /** creates a char parameter, sets it to its default value, and adds it to the parameter set */ SCIP_RETCODE SCIPsetAddCharParam( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ BMS_BLKMEM* blkmem, /**< block memory */ const char* name, /**< name of the parameter */ const char* desc, /**< description of the parameter */ char* valueptr, /**< pointer to store the current parameter value, or NULL */ SCIP_Bool isadvanced, /**< is this parameter an advanced parameter? */ char defaultvalue, /**< default value of the parameter */ const char* allowedvalues, /**< array with possible parameter values, or NULL if not restricted */ SCIP_DECL_PARAMCHGD ((*paramchgd)), /**< change information method of parameter */ SCIP_PARAMDATA* paramdata /**< locally defined parameter specific data */ ); /** creates a string parameter, sets it to its default value, and adds it to the parameter set */ SCIP_RETCODE SCIPsetAddStringParam( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ BMS_BLKMEM* blkmem, /**< block memory */ const char* name, /**< name of the parameter */ const char* desc, /**< description of the parameter */ char** valueptr, /**< pointer to store the current parameter value, or NULL */ SCIP_Bool isadvanced, /**< is this parameter an advanced parameter? */ const char* defaultvalue, /**< default value of the parameter */ SCIP_DECL_PARAMCHGD ((*paramchgd)), /**< change information method of parameter */ SCIP_PARAMDATA* paramdata /**< locally defined parameter specific data */ ); /** gets the fixing status value of an existing parameter */ SCIP_Bool SCIPsetIsParamFixed( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of the parameter */ ); /** returns the pointer to the SCIP parameter with the given name */ SCIP_PARAM* SCIPsetGetParam( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of the parameter */ ); /** gets the value of an existing SCIP_Bool parameter */ SCIP_RETCODE SCIPsetGetBoolParam( SCIP_SET* set, /**< global SCIP settings */ const char* name, /**< name of the parameter */ SCIP_Bool* value /**< pointer to store the parameter */ ); /** gets the value of an existing Int parameter */ SCIP_RETCODE SCIPsetGetIntParam( SCIP_SET* set, /**< global SCIP settings */ const char* name, /**< name of the parameter */ int* value /**< pointer to store the parameter */ ); /** gets the value of an existing SCIP_Longint parameter */ SCIP_RETCODE SCIPsetGetLongintParam( SCIP_SET* set, /**< global SCIP settings */ const char* name, /**< name of the parameter */ SCIP_Longint* value /**< pointer to store the parameter */ ); /** gets the value of an existing SCIP_Real parameter */ SCIP_RETCODE SCIPsetGetRealParam( SCIP_SET* set, /**< global SCIP settings */ const char* name, /**< name of the parameter */ SCIP_Real* value /**< pointer to store the parameter */ ); /** gets the value of an existing Char parameter */ SCIP_RETCODE SCIPsetGetCharParam( SCIP_SET* set, /**< global SCIP settings */ const char* name, /**< name of the parameter */ char* value /**< pointer to store the parameter */ ); /** gets the value of an existing String parameter */ SCIP_RETCODE SCIPsetGetStringParam( SCIP_SET* set, /**< global SCIP settings */ const char* name, /**< name of the parameter */ char** value /**< pointer to store the parameter */ ); /** changes the fixing status of an existing parameter */ SCIP_RETCODE SCIPsetChgParamFixed( SCIP_SET* set, /**< global SCIP settings */ const char* name, /**< name of the parameter */ SCIP_Bool fixed /**< new fixing status of the parameter */ ); /** changes the value of an existing SCIP_Bool parameter */ SCIP_RETCODE SCIPsetChgBoolParam( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ SCIP_PARAM* param, /**< parameter */ SCIP_Bool value /**< new value of the parameter */ ); /** changes the value of an existing SCIP_Bool parameter */ SCIP_RETCODE SCIPsetSetBoolParam( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ const char* name, /**< name of the parameter */ SCIP_Bool value /**< new value of the parameter */ ); /** changes the default value of an existing SCIP_Bool parameter */ SCIP_RETCODE SCIPsetSetDefaultBoolParam( SCIP_SET* set, /**< global SCIP settings */ const char* name, /**< name of the parameter */ SCIP_Bool defaultvalue /**< new default value of the parameter */ ); /** changes the value of an existing Int parameter */ SCIP_RETCODE SCIPsetChgIntParam( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ SCIP_PARAM* param, /**< parameter */ int value /**< new value of the parameter */ ); /** changes the value of an existing Int parameter */ SCIP_RETCODE SCIPsetSetIntParam( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ const char* name, /**< name of the parameter */ int value /**< new value of the parameter */ ); /** changes the default value of an existing Int parameter */ SCIP_RETCODE SCIPsetSetDefaultIntParam( SCIP_SET* set, /**< global SCIP settings */ const char* name, /**< name of the parameter */ int defaultvalue /**< new default value of the parameter */ ); /** changes the value of an existing SCIP_Longint parameter */ SCIP_RETCODE SCIPsetChgLongintParam( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ SCIP_PARAM* param, /**< parameter */ SCIP_Longint value /**< new value of the parameter */ ); /** changes the value of an existing SCIP_Longint parameter */ SCIP_RETCODE SCIPsetSetLongintParam( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ const char* name, /**< name of the parameter */ SCIP_Longint value /**< new value of the parameter */ ); /** changes the value of an existing SCIP_Real parameter */ SCIP_RETCODE SCIPsetChgRealParam( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ SCIP_PARAM* param, /**< parameter */ SCIP_Real value /**< new value of the parameter */ ); /** changes the value of an existing SCIP_Real parameter */ SCIP_RETCODE SCIPsetSetRealParam( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ const char* name, /**< name of the parameter */ SCIP_Real value /**< new value of the parameter */ ); /** changes the value of an existing Char parameter */ SCIP_RETCODE SCIPsetChgCharParam( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ SCIP_PARAM* param, /**< parameter */ char value /**< new value of the parameter */ ); /** changes the value of an existing Char parameter */ SCIP_RETCODE SCIPsetSetCharParam( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ const char* name, /**< name of the parameter */ char value /**< new value of the parameter */ ); /** changes the value of an existing String parameter */ SCIP_RETCODE SCIPsetChgStringParam( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ SCIP_PARAM* param, /**< parameter */ const char* value /**< new value of the parameter */ ); /** changes the value of an existing String parameter */ SCIP_RETCODE SCIPsetSetStringParam( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ const char* name, /**< name of the parameter */ const char* value /**< new value of the parameter */ ); /** reads parameters from a file */ SCIP_RETCODE SCIPsetReadParams( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ const char* filename /**< file name */ ); /** writes all parameters in the parameter set to a file */ SCIP_RETCODE SCIPsetWriteParams( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ const char* filename, /**< file name, or NULL for stdout */ SCIP_Bool comments, /**< should parameter descriptions be written as comments? */ SCIP_Bool onlychanged /**< should only the parameters been written, that are changed from default? */ ); /** resets a single parameters to its default value */ SCIP_RETCODE SCIPsetResetParam( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ const char* name /**< name of the parameter */ ); /** resets all parameters to their default values */ SCIP_RETCODE SCIPsetResetParams( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr /**< message handler */ ); /** sets parameters to * * - \ref SCIP_PARAMEMPHASIS_DEFAULT to use default values (see also SCIPsetResetParams()) * - \ref SCIP_PARAMEMPHASIS_COUNTER to get feasible and "fast" counting process * - \ref SCIP_PARAMEMPHASIS_CPSOLVER to get CP like search (e.g. no LP relaxation) * - \ref SCIP_PARAMEMPHASIS_EASYCIP to solve easy problems fast * - \ref SCIP_PARAMEMPHASIS_FEASIBILITY to detect feasibility fast * - \ref SCIP_PARAMEMPHASIS_HARDLP to be capable to handle hard LPs * - \ref SCIP_PARAMEMPHASIS_OPTIMALITY to prove optimality fast * - \ref SCIP_PARAMEMPHASIS_PHASEFEAS to find feasible solutions during a 3 phase solution process * - \ref SCIP_PARAMEMPHASIS_PHASEIMPROVE to find improved solutions during a 3 phase solution process * - \ref SCIP_PARAMEMPHASIS_PHASEPROOF to proof optimality during a 3 phase solution process */ SCIP_RETCODE SCIPsetSetEmphasis( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ SCIP_PARAMEMPHASIS paramemphasis, /**< parameter settings */ SCIP_Bool quiet /**< should the parameter be set quiet (no output) */ ); /** set parameters for reoptimization */ SCIP_RETCODE SCIPsetSetReoptimizationParams( SCIP_SET* set, /**< SCIP data structure */ SCIP_MESSAGEHDLR* messagehdlr /**< message handler */ ); /** enable or disable all plugin timers depending on the value of the flag \p enabled */ void SCIPsetEnableOrDisablePluginClocks( SCIP_SET* set, /**< SCIP settings */ SCIP_Bool enabled /**< should plugin clocks be enabled? */ ); /** sets parameters to deactivate separators and heuristics that use auxiliary SCIP instances; should be called for * auxiliary SCIP instances to avoid recursion */ SCIP_RETCODE SCIPsetSetSubscipsOff( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ SCIP_Bool quiet /**< should the parameter be set quiet (no output) */ ); /** sets heuristic parameters values to * - SCIP_PARAMSETTING_DEFAULT which are the default values of all heuristic parameters * - SCIP_PARAMSETTING_FAST such that the time spend for heuristic is decreased * - SCIP_PARAMSETTING_AGGRESSIVE such that the heuristic are called more aggregative * - SCIP_PARAMSETTING_OFF which turn off all heuristics */ SCIP_RETCODE SCIPsetSetHeuristics( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ SCIP_PARAMSETTING paramsetting, /**< parameter settings */ SCIP_Bool quiet /**< should the parameter be set quiet (no output) */ ); /** sets presolving parameters to * - SCIP_PARAMSETTING_DEFAULT which are the default values of all presolving parameters * - SCIP_PARAMSETTING_FAST such that the time spend for presolving is decreased * - SCIP_PARAMSETTING_AGGRESSIVE such that the presolving is more aggregative * - SCIP_PARAMSETTING_OFF which turn off all presolving */ SCIP_RETCODE SCIPsetSetPresolving( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ SCIP_PARAMSETTING paramsetting, /**< parameter settings */ SCIP_Bool quiet /**< should the parameter be set quiet (no output) */ ); /** sets separating parameters to * - SCIP_PARAMSETTING_DEFAULT which are the default values of all separating parameters * - SCIP_PARAMSETTING_FAST such that the time spend for separating is decreased * - SCIP_PARAMSETTING_AGGRESSIVE such that the separating is done more aggregative * - SCIP_PARAMSETTING_OFF which turn off all separating */ SCIP_RETCODE SCIPsetSetSeparating( SCIP_SET* set, /**< global SCIP settings */ SCIP_MESSAGEHDLR* messagehdlr, /**< message handler */ SCIP_PARAMSETTING paramsetting, /**< parameter settings */ SCIP_Bool quiet /**< should the parameter be set quiet (no output) */ ); /** returns the array of all available SCIP parameters */ SCIP_PARAM** SCIPsetGetParams( SCIP_SET* set /**< global SCIP settings */ ); /** returns the total number of all available SCIP parameters */ int SCIPsetGetNParams( SCIP_SET* set /**< global SCIP settings */ ); /** inserts file reader in file reader list */ SCIP_RETCODE SCIPsetIncludeReader( SCIP_SET* set, /**< global SCIP settings */ SCIP_READER* reader /**< file reader */ ); /** returns the file reader of the given name, or NULL if not existing */ SCIP_READER* SCIPsetFindReader( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of file reader */ ); /** inserts variable pricer in variable pricer list */ SCIP_RETCODE SCIPsetIncludePricer( SCIP_SET* set, /**< global SCIP settings */ SCIP_PRICER* pricer /**< variable pricer */ ); /** returns the variable pricer of the given name, or NULL if not existing */ SCIP_PRICER* SCIPsetFindPricer( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of variable pricer */ ); /** sorts pricers by priorities */ void SCIPsetSortPricers( SCIP_SET* set /**< global SCIP settings */ ); /** sorts pricers by name */ void SCIPsetSortPricersName( SCIP_SET* set /**< global SCIP settings */ ); /** inserts Benders' decomposition into the Benders' decomposition list */ SCIP_RETCODE SCIPsetIncludeBenders( SCIP_SET* set, /**< global SCIP settings */ SCIP_BENDERS* benders /**< Benders' decomposition */ ); /** returns the Benders' decomposition of the given name, or NULL if not existing */ SCIP_BENDERS* SCIPsetFindBenders( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of Benders' decomposition */ ); /** sorts Benders' decomposition by priorities */ void SCIPsetSortBenders( SCIP_SET* set /**< global SCIP settings */ ); /** sorts Benders' decomposition by name */ void SCIPsetSortBendersName( SCIP_SET* set /**< global SCIP settings */ ); /** inserts constraint handler in constraint handler list */ SCIP_RETCODE SCIPsetIncludeConshdlr( SCIP_SET* set, /**< global SCIP settings */ SCIP_CONSHDLR* conshdlr /**< constraint handler */ ); /** reinserts a constraint handler with modified sepa priority into the sepa priority sorted array */ void SCIPsetReinsertConshdlrSepaPrio( SCIP_SET* set, /**< global SCIP settings */ SCIP_CONSHDLR* conshdlr, /**< constraint handler to be reinserted */ int oldpriority /**< the old separation priority of constraint handler */ ); /** returns the constraint handler of the given name, or NULL if not existing */ SCIP_CONSHDLR* SCIPsetFindConshdlr( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of constraint handler */ ); /** inserts conflict handler in conflict handler list */ SCIP_RETCODE SCIPsetIncludeConflicthdlr( SCIP_SET* set, /**< global SCIP settings */ SCIP_CONFLICTHDLR* conflicthdlr /**< conflict handler */ ); /** returns the conflict handler of the given name, or NULL if not existing */ SCIP_CONFLICTHDLR* SCIPsetFindConflicthdlr( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of conflict handler */ ); /** sorts conflict handlers by priorities */ void SCIPsetSortConflicthdlrs( SCIP_SET* set /**< global SCIP settings */ ); /** sorts conflict handlers by name */ void SCIPsetSortConflicthdlrsName( SCIP_SET* set /**< global SCIP settings */ ); /** inserts presolver in presolver list */ SCIP_RETCODE SCIPsetIncludePresol( SCIP_SET* set, /**< global SCIP settings */ SCIP_PRESOL* presol /**< presolver */ ); /** returns the presolver of the given name, or NULL if not existing */ SCIP_PRESOL* SCIPsetFindPresol( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of presolver */ ); /** sorts presolvers by priorities */ void SCIPsetSortPresols( SCIP_SET* set /**< global SCIP settings */ ); /** sorts presolvers by name */ void SCIPsetSortPresolsName( SCIP_SET* set /**< global SCIP settings */ ); /** inserts relaxator in relaxator list */ SCIP_RETCODE SCIPsetIncludeRelax( SCIP_SET* set, /**< global SCIP settings */ SCIP_RELAX* relax /**< relaxator */ ); /** returns the relaxator of the given name, or NULL if not existing */ SCIP_RELAX* SCIPsetFindRelax( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of relaxator */ ); /** sorts relaxators by priorities */ void SCIPsetSortRelaxs( SCIP_SET* set /**< global SCIP settings */ ); /** sorts relaxators by name */ void SCIPsetSortRelaxsName( SCIP_SET* set /**< global SCIP settings */ ); /** inserts separator in separator list */ SCIP_RETCODE SCIPsetIncludeSepa( SCIP_SET* set, /**< global SCIP settings */ SCIP_SEPA* sepa /**< separator */ ); /** returns the separator of the given name, or NULL if not existing */ SCIP_SEPA* SCIPsetFindSepa( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of separator */ ); /** sorts separators by priorities */ void SCIPsetSortSepas( SCIP_SET* set /**< global SCIP settings */ ); /** sorts separators by name */ void SCIPsetSortSepasName( SCIP_SET* set /**< global SCIP settings */ ); /** inserts cut selector in cut selector list */ SCIP_RETCODE SCIPsetIncludeCutsel( SCIP_SET* set, /**< global SCIP settings */ SCIP_CUTSEL* cutsel /**< cut selector */ ); /** returns the cut selector of the given name, or NULL if not existing */ SCIP_CUTSEL* SCIPsetFindCutsel( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of separator */ ); /** sorts cut selectors by priorities */ void SCIPsetSortCutsels( SCIP_SET* set /**< global SCIP settings */ ); /** inserts propagator in propagator list */ SCIP_RETCODE SCIPsetIncludeProp( SCIP_SET* set, /**< global SCIP settings */ SCIP_PROP* prop /**< propagator */ ); /** returns the propagator of the given name, or NULL if not existing */ SCIP_PROP* SCIPsetFindProp( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of propagator */ ); /** sorts propagators by priorities */ void SCIPsetSortProps( SCIP_SET* set /**< global SCIP settings */ ); /** sorts propagators by priorities for presolving */ void SCIPsetSortPropsPresol( SCIP_SET* set /**< global SCIP settings */ ); /** sorts propagators w.r.t. names */ void SCIPsetSortPropsName( SCIP_SET* set /**< global SCIP settings */ ); /** inserts concurrent solver type into the concurrent solver type list */ SCIP_RETCODE SCIPsetIncludeConcsolverType( SCIP_SET* set, /**< global SCIP settings */ SCIP_CONCSOLVERTYPE* concsolvertype /**< concurrent solver type */ ); /** returns the concurrent solver type with the given name, or NULL if not existing */ SCIP_CONCSOLVERTYPE* SCIPsetFindConcsolverType( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of concurrent solver type */ ); /** inserts concurrent solver into the concurrent solver list */ SCIP_RETCODE SCIPsetIncludeConcsolver( SCIP_SET* set, /**< global SCIP settings */ SCIP_CONCSOLVER* concsolver /**< concurrent solver */ ); /** frees all concurrent solvers in the concurrent solver list */ SCIP_RETCODE SCIPsetFreeConcsolvers( SCIP_SET* set /**< global SCIP settings */ ); /** inserts primal heuristic in primal heuristic list */ SCIP_RETCODE SCIPsetIncludeHeur( SCIP_SET* set, /**< global SCIP settings */ SCIP_HEUR* heur /**< primal heuristic */ ); /** returns the primal heuristic of the given name, or NULL if not existing */ SCIP_HEUR* SCIPsetFindHeur( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of primal heuristic */ ); /** sorts heuristics by priorities */ void SCIPsetSortHeurs( SCIP_SET* set /**< global SCIP settings */ ); /** sorts heuristics by name */ void SCIPsetSortHeursName( SCIP_SET* set /**< global SCIP settings */ ); /** inserts tree compression in tree compression list */ SCIP_RETCODE SCIPsetIncludeCompr( SCIP_SET* set, /**< global SCIP settings */ SCIP_COMPR* compr /**< tree compression */ ); /** returns the tree compression of the given name, or NULL if not existing */ SCIP_COMPR* SCIPsetFindCompr( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of tree compression */ ); /** sorts compressions by priorities */ void SCIPsetSortComprs( SCIP_SET* set /**< global SCIP settings */ ); /** sorts heuristics by names */ void SCIPsetSortComprsName( SCIP_SET* set /**< global SCIP settings */ ); /** inserts event handler in event handler list */ SCIP_RETCODE SCIPsetIncludeEventhdlr( SCIP_SET* set, /**< global SCIP settings */ SCIP_EVENTHDLR* eventhdlr /**< event handler */ ); /** returns the event handler of the given name, or NULL if not existing */ SCIP_EVENTHDLR* SCIPsetFindEventhdlr( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of event handler */ ); /** inserts node selector in node selector list */ SCIP_RETCODE SCIPsetIncludeNodesel( SCIP_SET* set, /**< global SCIP settings */ SCIP_NODESEL* nodesel /**< node selector */ ); /** returns the node selector of the given name, or NULL if not existing */ SCIP_NODESEL* SCIPsetFindNodesel( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of event handler */ ); /** returns node selector with highest priority in the current mode */ SCIP_NODESEL* SCIPsetGetNodesel( SCIP_SET* set, /**< global SCIP settings */ SCIP_STAT* stat /**< dynamic problem statistics */ ); /** inserts branching rule in branching rule list */ SCIP_RETCODE SCIPsetIncludeBranchrule( SCIP_SET* set, /**< global SCIP settings */ SCIP_BRANCHRULE* branchrule /**< branching rule */ ); /** returns the branching rule of the given name, or NULL if not existing */ SCIP_BRANCHRULE* SCIPsetFindBranchrule( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of event handler */ ); /** sorts branching rules by priorities */ void SCIPsetSortBranchrules( SCIP_SET* set /**< global SCIP settings */ ); /** sorts branching rules by name */ void SCIPsetSortBranchrulesName( SCIP_SET* set /**< global SCIP settings */ ); /** inserts display column in display column list */ SCIP_RETCODE SCIPsetIncludeDisp( SCIP_SET* set, /**< global SCIP settings */ SCIP_DISP* disp /**< display column */ ); /** returns the display column of the given name, or NULL if not existing */ SCIP_DISP* SCIPsetFindDisp( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of display */ ); /** inserts statistics table in statistics table list */ SCIP_RETCODE SCIPsetIncludeTable( SCIP_SET* set, /**< global SCIP settings */ SCIP_TABLE* table /**< statistics table */ ); /** returns the statistics table of the given name, or NULL if not existing */ SCIP_TABLE* SCIPsetFindTable( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of statistics table */ ); /** inserts dialog in dialog list */ SCIP_RETCODE SCIPsetIncludeDialog( SCIP_SET* set, /**< global SCIP settings */ SCIP_DIALOG* dialog /**< dialog */ ); /** returns if the dialog already exists */ SCIP_Bool SCIPsetExistsDialog( SCIP_SET* set, /**< global SCIP settings */ SCIP_DIALOG* dialog /**< dialog */ ); /** inserts expression handler in expression handler list */ SCIP_RETCODE SCIPsetIncludeExprhdlr( SCIP_SET* set, /**< global SCIP settings */ SCIP_EXPRHDLR* exprhdlr /**< expression handler */ ); /** returns the expression handler of the given name, or NULL if not existing */ SCIP_EXPORT /* need SCIP_EXPORT here, because func is exposed in API via SCIPfindExprhdlr() macro */ SCIP_EXPRHDLR* SCIPsetFindExprhdlr( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of expression handler */ ); /** sorts expression handlers by name */ void SCIPsetSortExprhdlrs( SCIP_SET* set /**< global SCIP settings */ ); /** inserts NLPI in NLPI list */ SCIP_RETCODE SCIPsetIncludeNlpi( SCIP_SET* set, /**< global SCIP settings */ SCIP_NLPI* nlpi /**< NLPI */ ); /** returns the NLPI of the given name, or NULL if not existing */ SCIP_NLPI* SCIPsetFindNlpi( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of NLPI */ ); /** sorts NLPIs by priorities */ void SCIPsetSortNlpis( SCIP_SET* set /**< global SCIP settings */ ); /** set priority of an NLPI */ void SCIPsetSetPriorityNlpi( SCIP_SET* set, /**< global SCIP settings */ SCIP_NLPI* nlpi, /**< NLPI */ int priority /**< new priority of NLPI */ ); /** inserts information about an external code in external codes list */ SCIP_RETCODE SCIPsetIncludeExternalCode( SCIP_SET* set, /**< global SCIP settings */ const char* name, /**< name of external code */ const char* description /**< description of external code, can be NULL */ ); /** inserts bandit virtual function table into set */ SCIP_RETCODE SCIPsetIncludeBanditvtable( SCIP_SET* set, /**< global SCIP settings */ SCIP_BANDITVTABLE* banditvtable /**< bandit algorithm virtual function table */ ); /** returns the bandit virtual function table of the given name, or NULL if not existing */ SCIP_BANDITVTABLE* SCIPsetFindBanditvtable( SCIP_SET* set, /**< global SCIP settings */ const char* name /**< name of bandit algorithm virtual function table */ ); /** calls init methods of all plugins */ SCIP_RETCODE SCIPsetInitPlugins( SCIP_SET* set, /**< global SCIP settings */ BMS_BLKMEM* blkmem, /**< block memory */ SCIP_STAT* stat /**< dynamic problem statistics */ ); /** calls exit methods of all plugins */ SCIP_RETCODE SCIPsetExitPlugins( SCIP_SET* set, /**< global SCIP settings */ BMS_BLKMEM* blkmem, /**< block memory */ SCIP_STAT* stat /**< dynamic problem statistics */ ); /** calls initpre methods of all plugins */ SCIP_RETCODE SCIPsetInitprePlugins( SCIP_SET* set, /**< global SCIP settings */ BMS_BLKMEM* blkmem, /**< block memory */ SCIP_STAT* stat /**< dynamic problem statistics */ ); /** calls exitpre methods of all plugins */ SCIP_RETCODE SCIPsetExitprePlugins( SCIP_SET* set, /**< global SCIP settings */ BMS_BLKMEM* blkmem, /**< block memory */ SCIP_STAT* stat /**< dynamic problem statistics */ ); /** calls initsol methods of all plugins */ SCIP_RETCODE SCIPsetInitsolPlugins( SCIP_SET* set, /**< global SCIP settings */ BMS_BLKMEM* blkmem, /**< block memory */ SCIP_STAT* stat /**< dynamic problem statistics */ ); /** calls exitsol methods of all plugins */ SCIP_RETCODE SCIPsetExitsolPlugins( SCIP_SET* set, /**< global SCIP settings */ BMS_BLKMEM* blkmem, /**< block memory */ SCIP_STAT* stat, /**< dynamic problem statistics */ SCIP_Bool restart /**< was this exit solve call triggered by a restart? */ ); /** calculate memory size for dynamically allocated arrays */ int SCIPsetCalcMemGrowSize( SCIP_SET* set, /**< global SCIP settings */ int num /**< minimum number of entries to store */ ); /** calculate memory size for tree array */ int SCIPsetCalcTreeGrowSize( SCIP_SET* set, /**< global SCIP settings */ int num /**< minimum number of entries to store */ ); /** calculate memory size for path array */ int SCIPsetCalcPathGrowSize( SCIP_SET* set, /**< global SCIP settings */ int num /**< minimum number of entries to store */ ); /** sets verbosity level for message output */ SCIP_RETCODE SCIPsetSetVerbLevel( SCIP_SET* set, /**< global SCIP settings */ SCIP_VERBLEVEL verblevel /**< verbosity level for message output */ ); /** sets feasibility tolerance */ SCIP_RETCODE SCIPsetSetFeastol( SCIP_SET* set, /**< global SCIP settings */ SCIP_LP* lp, /**< LP data, or NULL */ SCIP_Real feastol /**< new feasibility tolerance */ ); /** sets feasibility tolerance for reduced costs in LP solution */ SCIP_RETCODE SCIPsetSetDualfeastol( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real dualfeastol /**< new reduced costs feasibility tolerance */ ); /** sets LP convergence tolerance used in barrier algorithm */ SCIP_RETCODE SCIPsetSetBarrierconvtol( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real barrierconvtol /**< new convergence tolerance used in barrier algorithm */ ); /** sets primal feasibility tolerance for relaxations (relaxfeastol) * * @note Set to SCIP_INVALID to apply relaxation-specific feasibility tolerance only. * * @return Previous value of relaxfeastol. */ SCIP_Real SCIPsetSetRelaxfeastol( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real relaxfeastol /**< new primal feasibility tolerance for relaxations, or SCIP_INVALID */ ); /** marks that some limit parameter was changed */ void SCIPsetSetLimitChanged( SCIP_SET* set /**< global SCIP settings */ ); /** returns the maximal number of variables priced into the LP per round */ int SCIPsetGetPriceMaxvars( SCIP_SET* set, /**< global SCIP settings */ SCIP_Bool root /**< are we at the root node? */ ); /** returns the maximal number of cuts separated per round */ int SCIPsetGetSepaMaxcuts( SCIP_SET* set, /**< global SCIP settings */ SCIP_Bool root /**< are we at the root node? */ ); /** returns the maximal ratio between coefficients to ensure in rowprep cleanup */ SCIP_Real SCIPsetGetSepaMaxCoefRatioRowprep( SCIP_SET* set /**< global SCIP settings */ ); /** returns user defined objective value (in original space) for reference purposes */ SCIP_Real SCIPsetGetReferencevalue( SCIP_SET* set /**< global SCIP settings */ ); /** returns debug solution data */ SCIP_DEBUGSOLDATA* SCIPsetGetDebugSolData( SCIP_SET* set /**< global SCIP settings */ ); /** Checks, if an iteratively updated value is reliable or should be recomputed from scratch. * This is useful, if the value, e.g., the activity of a linear constraint or the pseudo objective value, gets a high * absolute value during the optimization process which is later reduced significantly. In this case, the last digits * were cancelled out when increasing the value and are random after decreasing it. * We dot not consider the cancellations which can occur during increasing the absolute value because they just cannot * be expressed using fixed precision floating point arithmetic, anymore. * The idea to get more reliable values is to always store the last reliable value, where increasing the absolute of * the value is viewed as preserving reliability. Then, after each update, the new absolute value can be compared * against the last reliable one with this method, checking whether it was decreased by a factor of at least * "lp/recompfac" and should be recomputed. */ SCIP_Bool SCIPsetIsUpdateUnreliable( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real newvalue, /**< new value after update */ SCIP_Real oldvalue /**< old value, i.e., last reliable value */ ); /** modifies an initial seed value with the global shift of random seeds */ unsigned int SCIPsetInitializeRandomSeed( SCIP_SET* set, /**< global SCIP settings */ unsigned int initialseedvalue /**< initial seed value to be modified */ ); /** returns value treated as infinity */ SCIP_Real SCIPsetInfinity( SCIP_SET* set /**< global SCIP settings */ ); /** returns the minimum value that is regarded as huge and should be handled separately (e.g., in activity * computation) */ SCIP_Real SCIPsetGetHugeValue( SCIP_SET* set /**< global SCIP settings */ ); /** returns value treated as zero */ SCIP_Real SCIPsetEpsilon( SCIP_SET* set /**< global SCIP settings */ ); /** returns value treated as zero for sums of floating point values */ SCIP_Real SCIPsetSumepsilon( SCIP_SET* set /**< global SCIP settings */ ); /** returns feasibility tolerance for constraints */ #ifdef __GNUC__ __attribute__ ((pure)) #endif SCIP_Real SCIPsetFeastol( SCIP_SET* set /**< global SCIP settings */ ); /** returns factor w.r.t. primal feasibility tolerance that determines default (and maximal) feasibility tolerance */ SCIP_Real SCIPsetLPFeastolFactor( SCIP_SET* set /**< global SCIP settings */ ); /** returns feasibility tolerance for reduced costs */ #ifdef __GNUC__ __attribute__ ((pure)) #endif SCIP_Real SCIPsetDualfeastol( SCIP_SET* set /**< global SCIP settings */ ); /** returns convergence tolerance used in barrier algorithm */ SCIP_Real SCIPsetBarrierconvtol( SCIP_SET* set /**< global SCIP settings */ ); /** returns minimal variable distance value to use for pseudo cost updates */ SCIP_Real SCIPsetPseudocosteps( SCIP_SET* set /**< global SCIP settings */ ); /** returns minimal minimal objective distance value to use for pseudo cost updates */ SCIP_Real SCIPsetPseudocostdelta( SCIP_SET* set /**< global SCIP settings */ ); /** return the delta to use for computing the cutoff bound for integral objectives */ SCIP_Real SCIPsetCutoffbounddelta( SCIP_SET* set /**< global SCIP settings */ ); /** return the primal feasibility tolerance for relaxations */ SCIP_Real SCIPsetRelaxfeastol( SCIP_SET* set /**< global SCIP settings */ ); /** returns minimal decrease factor that causes the recomputation of a value * (e.g., pseudo objective) instead of an update */ SCIP_Real SCIPsetRecompfac( SCIP_SET* set /**< global SCIP settings */ ); /** checks, if values are in range of epsilon */ SCIP_Bool SCIPsetIsEQ( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if val1 is (more than epsilon) lower than val2 */ SCIP_Bool SCIPsetIsLT( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if val1 is not (more than epsilon) greater than val2 */ SCIP_Bool SCIPsetIsLE( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if val1 is (more than epsilon) greater than val2 */ SCIP_Bool SCIPsetIsGT( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if val1 is not (more than epsilon) lower than val2 */ SCIP_Bool SCIPsetIsGE( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if value is (positive) infinite */ SCIP_Bool SCIPsetIsInfinity( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against infinity */ ); /** checks, if value is huge and should be handled separately (e.g., in activity computation) */ SCIP_Bool SCIPsetIsHugeValue( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be checked whether it is huge */ ); /** checks, if value is in range epsilon of 0.0 */ SCIP_Bool SCIPsetIsZero( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** checks, if value is greater than epsilon */ SCIP_Bool SCIPsetIsPositive( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** checks, if value is lower than -epsilon */ SCIP_Bool SCIPsetIsNegative( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** checks, if value is integral within epsilon */ SCIP_Bool SCIPsetIsIntegral( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** checks whether the product val * scalar is integral in epsilon scaled by scalar */ SCIP_Bool SCIPsetIsScalingIntegral( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val, /**< unscaled value to check for scaled integrality */ SCIP_Real scalar /**< value to scale val with for checking for integrality */ ); /** checks, if given fractional part is smaller than epsilon */ SCIP_Bool SCIPsetIsFracIntegral( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** rounds value + feasibility tolerance down to the next integer in epsilon tolerance */ SCIP_Real SCIPsetFloor( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** rounds value - feasibility tolerance up to the next integer in epsilon tolerance */ SCIP_Real SCIPsetCeil( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** rounds value to the nearest integer in epsilon tolerance */ SCIP_Real SCIPsetRound( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** returns fractional part of value, i.e. x - floor(x) in epsilon tolerance */ SCIP_Real SCIPsetFrac( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to return fractional part for */ ); /** checks, if values are in range of sumepsilon */ SCIP_Bool SCIPsetIsSumEQ( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if val1 is (more than sumepsilon) lower than val2 */ SCIP_Bool SCIPsetIsSumLT( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if val1 is not (more than sumepsilon) greater than val2 */ SCIP_Bool SCIPsetIsSumLE( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if val1 is (more than sumepsilon) greater than val2 */ SCIP_Bool SCIPsetIsSumGT( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if val1 is not (more than sumepsilon) lower than val2 */ SCIP_Bool SCIPsetIsSumGE( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if value is in range sumepsilon of 0.0 */ SCIP_Bool SCIPsetIsSumZero( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** checks, if value is greater than sumepsilon */ SCIP_Bool SCIPsetIsSumPositive( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** checks, if value is lower than -sumepsilon */ SCIP_Bool SCIPsetIsSumNegative( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** rounds value + sumepsilon tolerance down to the next integer */ SCIP_Real SCIPsetSumFloor( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to process */ ); /** rounds value - sumepsilon tolerance up to the next integer */ SCIP_Real SCIPsetSumCeil( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to process */ ); /** rounds value to the nearest integer in sumepsilon tolerance */ SCIP_Real SCIPsetSumRound( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to process */ ); /** returns fractional part of value, i.e. x - floor(x) in sumepsilon tolerance */ SCIP_Real SCIPsetSumFrac( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to process */ ); /** checks, if relative difference of values is in range of feastol */ SCIP_Bool SCIPsetIsFeasEQ( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if relative difference of val1 and val2 is lower than feastol */ SCIP_Bool SCIPsetIsFeasLT( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if relative difference of val1 and val2 is not greater than feastol */ SCIP_Bool SCIPsetIsFeasLE( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if relative difference of val1 and val2 is greater than feastol */ SCIP_Bool SCIPsetIsFeasGT( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if relative difference of val1 and val2 is not lower than -feastol */ SCIP_Bool SCIPsetIsFeasGE( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if value is in range feasibility tolerance of 0.0 */ SCIP_Bool SCIPsetIsFeasZero( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** checks, if value is greater than feasibility tolerance */ SCIP_Bool SCIPsetIsFeasPositive( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** checks, if value is lower than -feasibility tolerance */ SCIP_Bool SCIPsetIsFeasNegative( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** checks, if value is integral within the feasibility bounds */ SCIP_Bool SCIPsetIsFeasIntegral( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** checks, if given fractional part is smaller than feastol */ SCIP_Bool SCIPsetIsFeasFracIntegral( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** rounds value + feasibility tolerance down to the next integer */ SCIP_Real SCIPsetFeasFloor( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** rounds value - feasibility tolerance up to the next integer */ SCIP_Real SCIPsetFeasCeil( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** rounds value to the nearest integer in feasibility tolerance */ SCIP_Real SCIPsetFeasRound( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** returns fractional part of value, i.e. x - floor(x) in feasibility tolerance */ SCIP_Real SCIPsetFeasFrac( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to return fractional part for */ ); /** checks, if relative difference of values is in range of dual feasibility tolerance */ SCIP_Bool SCIPsetIsDualfeasEQ( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if relative difference of val1 and val2 is lower than dual feasibility tolerance */ SCIP_Bool SCIPsetIsDualfeasLT( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if relative difference of val1 and val2 is not greater than dual feasibility tolerance */ SCIP_Bool SCIPsetIsDualfeasLE( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if relative difference of val1 and val2 is greater than dual feasibility tolerance */ SCIP_Bool SCIPsetIsDualfeasGT( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if relative difference of val1 and val2 is not lower than -dual feasibility tolerance */ SCIP_Bool SCIPsetIsDualfeasGE( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if value is in range dual feasibility tolerance of 0.0 */ SCIP_Bool SCIPsetIsDualfeasZero( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** checks, if value is greater than dual feasibility tolerance */ SCIP_Bool SCIPsetIsDualfeasPositive( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** checks, if value is lower than -dual feasibility tolerance */ SCIP_Bool SCIPsetIsDualfeasNegative( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** checks, if value is integral within the dual feasibility bounds */ SCIP_Bool SCIPsetIsDualfeasIntegral( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** checks, if given fractional part is smaller than dual feasibility tolerance */ SCIP_Bool SCIPsetIsDualfeasFracIntegral( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** rounds value + dual feasibility tolerance down to the next integer */ SCIP_Real SCIPsetDualfeasFloor( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** rounds value - dual feasibility tolerance up to the next integer */ SCIP_Real SCIPsetDualfeasCeil( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** rounds value to the nearest integer in dual feasibility tolerance */ SCIP_Real SCIPsetDualfeasRound( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to be compared against zero */ ); /** returns fractional part of value, i.e. x - floor(x) in dual feasibility tolerance */ SCIP_Real SCIPsetDualfeasFrac( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val /**< value to return fractional part for */ ); /** checks, if the given new lower bound is at least min(oldub - oldlb, |oldlb|) times the bound * strengthening epsilon better than the old one or the change in the lower bound would fix the * sign of the variable */ SCIP_Bool SCIPsetIsLbBetter( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real newlb, /**< new lower bound */ SCIP_Real oldlb, /**< old lower bound */ SCIP_Real oldub /**< old upper bound */ ); /** checks, if the given new upper bound is at least min(oldub - oldlb, |oldub|) times the bound * strengthening epsilon better than the old one or the change in the upper bound would fix the * sign of the variable */ SCIP_Bool SCIPsetIsUbBetter( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real newub, /**< new upper bound */ SCIP_Real oldlb, /**< old lower bound */ SCIP_Real oldub /**< old upper bound */ ); /** checks, if the given cut's efficacy is larger than the minimal cut efficacy */ SCIP_Bool SCIPsetIsEfficacious( SCIP_SET* set, /**< global SCIP settings */ SCIP_Bool root, /**< should the root's minimal cut efficacy be used? */ SCIP_Real efficacy /**< efficacy of the cut */ ); /** checks, if relative difference of values is in range of epsilon */ SCIP_Bool SCIPsetIsRelEQ( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if relative difference of val1 and val2 is lower than epsilon */ SCIP_Bool SCIPsetIsRelLT( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if relative difference of val1 and val2 is not greater than epsilon */ SCIP_Bool SCIPsetIsRelLE( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if relative difference of val1 and val2 is greater than epsilon */ SCIP_Bool SCIPsetIsRelGT( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if relative difference of val1 and val2 is not lower than -epsilon */ SCIP_Bool SCIPsetIsRelGE( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if relative difference of values is in range of sumepsilon */ SCIP_Bool SCIPsetIsSumRelEQ( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if relative difference of val1 and val2 is lower than sumepsilon */ SCIP_Bool SCIPsetIsSumRelLT( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if relative difference of val1 and val2 is not greater than sumepsilon */ SCIP_Bool SCIPsetIsSumRelLE( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if relative difference of val1 and val2 is greater than sumepsilon */ SCIP_Bool SCIPsetIsSumRelGT( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** checks, if relative difference of val1 and val2 is not lower than -sumepsilon */ SCIP_Bool SCIPsetIsSumRelGE( SCIP_SET* set, /**< global SCIP settings */ SCIP_Real val1, /**< first value to be compared */ SCIP_Real val2 /**< second value to be compared */ ); /** returns the flag indicating whether sub-SCIPs that could cause recursion have been deactivated */ SCIP_Bool SCIPsetGetSubscipsOff( SCIP_SET* set /**< global SCIP settings */ ); #ifdef NDEBUG /* In optimized mode, the function calls are overwritten by defines to reduce the number of function calls and * speed up the algorithms. */ #define SCIPsetInfinity(set) ( (set)->num_infinity ) #define SCIPsetGetHugeValue(set) ( (set)->num_hugeval ) #define SCIPsetEpsilon(set) ( (set)->num_epsilon ) #define SCIPsetSumepsilon(set) ( (set)->num_sumepsilon ) #define SCIPsetFeastol(set) ( (set)->num_feastol ) #define SCIPsetLPFeastolFactor(set) ( (set)->num_lpfeastolfactor ) #define SCIPsetDualfeastol(set) ( (set)->num_dualfeastol ) #define SCIPsetBarrierconvtol(set) ( (set)->num_barrierconvtol ) #define SCIPsetPseudocosteps(set) ( (set)->num_pseudocosteps ) #define SCIPsetPseudocostdelta(set) ( (set)->num_pseudocostdelta ) #define SCIPsetRelaxfeastol(set) ( (set)->num_relaxfeastol ) #define SCIPsetCutoffbounddelta(set) ( MIN(100.0 * SCIPsetFeastol(set), 0.0001) ) #define SCIPsetRecompfac(set) ( (set)->num_recompfac ) #define SCIPsetIsEQ(set, val1, val2) ( EPSEQ(val1, val2, (set)->num_epsilon) ) #define SCIPsetIsLT(set, val1, val2) ( EPSLT(val1, val2, (set)->num_epsilon) ) #define SCIPsetIsLE(set, val1, val2) ( EPSLE(val1, val2, (set)->num_epsilon) ) #define SCIPsetIsGT(set, val1, val2) ( EPSGT(val1, val2, (set)->num_epsilon) ) #define SCIPsetIsGE(set, val1, val2) ( EPSGE(val1, val2, (set)->num_epsilon) ) #define SCIPsetIsInfinity(set, val) ( (val) >= (set)->num_infinity ) #define SCIPsetIsHugeValue(set, val) ( (val) >= (set)->num_hugeval ) #define SCIPsetIsZero(set, val) ( EPSZ(val, (set)->num_epsilon) ) #define SCIPsetIsPositive(set, val) ( EPSP(val, (set)->num_epsilon) ) #define SCIPsetIsNegative(set, val) ( EPSN(val, (set)->num_epsilon) ) #define SCIPsetIsIntegral(set, val) ( EPSISINT(val, (set)->num_epsilon) ) #define SCIPsetIsScalingIntegral(set, val, scalar) \ ( EPSISINT((scalar)*(val), MAX(REALABS(scalar), 1.0)*(set)->num_epsilon) ) #define SCIPsetIsFracIntegral(set, val) ( !EPSP(val, (set)->num_epsilon) ) #define SCIPsetFloor(set, val) ( EPSFLOOR(val, (set)->num_epsilon) ) #define SCIPsetCeil(set, val) ( EPSCEIL(val, (set)->num_epsilon) ) #define SCIPsetRound(set, val) ( EPSROUND(val, (set)->num_epsilon) ) #define SCIPsetFrac(set, val) ( EPSFRAC(val, (set)->num_epsilon) ) #define SCIPsetIsSumEQ(set, val1, val2) ( EPSEQ(val1, val2, (set)->num_sumepsilon) ) #define SCIPsetIsSumLT(set, val1, val2) ( EPSLT(val1, val2, (set)->num_sumepsilon) ) #define SCIPsetIsSumLE(set, val1, val2) ( EPSLE(val1, val2, (set)->num_sumepsilon) ) #define SCIPsetIsSumGT(set, val1, val2) ( EPSGT(val1, val2, (set)->num_sumepsilon) ) #define SCIPsetIsSumGE(set, val1, val2) ( EPSGE(val1, val2, (set)->num_sumepsilon) ) #define SCIPsetIsSumZero(set, val) ( EPSZ(val, (set)->num_sumepsilon) ) #define SCIPsetIsSumPositive(set, val) ( EPSP(val, (set)->num_sumepsilon) ) #define SCIPsetIsSumNegative(set, val) ( EPSN(val, (set)->num_sumepsilon) ) #define SCIPsetSumFloor(set, val) ( EPSFLOOR(val, (set)->num_sumepsilon) ) #define SCIPsetSumCeil(set, val) ( EPSCEIL(val, (set)->num_sumepsilon) ) #define SCIPsetSumRound(set, val) ( EPSROUND(val, (set)->num_sumepsilon) ) #define SCIPsetSumFrac(set, val) ( EPSFRAC(val, (set)->num_sumepsilon) ) #define SCIPsetIsFeasEQ(set, val1, val2) ( EPSZ(SCIPrelDiff(val1, val2), (set)->num_feastol) ) #define SCIPsetIsFeasLT(set, val1, val2) ( EPSN(SCIPrelDiff(val1, val2), (set)->num_feastol) ) #define SCIPsetIsFeasLE(set, val1, val2) ( !EPSP(SCIPrelDiff(val1, val2), (set)->num_feastol) ) #define SCIPsetIsFeasGT(set, val1, val2) ( EPSP(SCIPrelDiff(val1, val2), (set)->num_feastol) ) #define SCIPsetIsFeasGE(set, val1, val2) ( !EPSN(SCIPrelDiff(val1, val2), (set)->num_feastol) ) #define SCIPsetIsFeasZero(set, val) ( EPSZ(val, (set)->num_feastol) ) #define SCIPsetIsFeasPositive(set, val) ( EPSP(val, (set)->num_feastol) ) #define SCIPsetIsFeasNegative(set, val) ( EPSN(val, (set)->num_feastol) ) #define SCIPsetIsFeasIntegral(set, val) ( EPSISINT(val, (set)->num_feastol) ) #define SCIPsetIsFeasFracIntegral(set, val) ( !EPSP(val, (set)->num_feastol) ) #define SCIPsetFeasFloor(set, val) ( EPSFLOOR(val, (set)->num_feastol) ) #define SCIPsetFeasCeil(set, val) ( EPSCEIL(val, (set)->num_feastol) ) #define SCIPsetFeasRound(set, val) ( EPSROUND(val, (set)->num_feastol) ) #define SCIPsetFeasFrac(set, val) ( EPSFRAC(val, (set)->num_feastol) ) #define SCIPsetIsDualfeasEQ(set, val1, val2) ( EPSZ(SCIPrelDiff(val1, val2), (set)->num_dualfeastol) ) #define SCIPsetIsDualfeasLT(set, val1, val2) ( EPSN(SCIPrelDiff(val1, val2), (set)->num_dualfeastol) ) #define SCIPsetIsDualfeasLE(set, val1, val2) ( !EPSP(SCIPrelDiff(val1, val2), (set)->num_dualfeastol) ) #define SCIPsetIsDualfeasGT(set, val1, val2) ( EPSP(SCIPrelDiff(val1, val2), (set)->num_dualfeastol) ) #define SCIPsetIsDualfeasGE(set, val1, val2) ( !EPSN(SCIPrelDiff(val1, val2), (set)->num_dualfeastol) ) #define SCIPsetIsDualfeasZero(set, val) ( EPSZ(val, (set)->num_dualfeastol) ) #define SCIPsetIsDualfeasPositive(set, val) ( EPSP(val, (set)->num_dualfeastol) ) #define SCIPsetIsDualfeasNegative(set, val) ( EPSN(val, (set)->num_dualfeastol) ) #define SCIPsetIsDualfeasIntegral(set, val) ( EPSISINT(val, (set)->num_dualfeastol) ) #define SCIPsetIsDualfeasFracIntegral(set, val) ( !EPSP(val, (set)->num_dualfeastol) ) #define SCIPsetDualfeasFloor(set, val) ( EPSFLOOR(val, (set)->num_dualfeastol) ) #define SCIPsetDualfeasCeil(set, val) ( EPSCEIL(val, (set)->num_dualfeastol) ) #define SCIPsetDualfeasRound(set, val) ( EPSROUND(val, (set)->num_dualfeastol) ) #define SCIPsetDualfeasFrac(set, val) ( EPSFRAC(val, (set)->num_dualfeastol) ) #define SCIPsetIsLbBetter(set, newlb, oldlb, oldub) ( ((oldlb) < 0.0 && (newlb) >= 0.0) || EPSGT(newlb, oldlb, \ set->num_boundstreps * MAX(MIN((oldub) - (oldlb), REALABS(oldlb)), 1e-3)) ) #define SCIPsetIsUbBetter(set, newub, oldlb, oldub) ( ((oldub) > 0.0 && (newub) <= 0.0) || EPSLT(newub, oldub, \ set->num_boundstreps * MAX(MIN((oldub) - (oldlb), REALABS(oldub)), 1e-3)) ) #define SCIPsetIsEfficacious(set, root, efficacy) \ ( root ? EPSP(efficacy, (set)->sepa_minefficacyroot) : EPSP(efficacy, (set)->sepa_minefficacy) ) #define SCIPsetIsRelEQ(set, val1, val2) ( EPSZ(SCIPrelDiff(val1, val2), (set)->num_epsilon) ) #define SCIPsetIsRelLT(set, val1, val2) ( EPSN(SCIPrelDiff(val1, val2), (set)->num_epsilon) ) #define SCIPsetIsRelLE(set, val1, val2) ( !EPSP(SCIPrelDiff(val1, val2), (set)->num_epsilon) ) #define SCIPsetIsRelGT(set, val1, val2) ( EPSP(SCIPrelDiff(val1, val2), (set)->num_epsilon) ) #define SCIPsetIsRelGE(set, val1, val2) ( !EPSN(SCIPrelDiff(val1, val2), (set)->num_epsilon) ) #define SCIPsetIsSumRelEQ(set, val1, val2) ( EPSZ(SCIPrelDiff(val1, val2), (set)->num_sumepsilon) ) #define SCIPsetIsSumRelLT(set, val1, val2) ( EPSN(SCIPrelDiff(val1, val2), (set)->num_sumepsilon) ) #define SCIPsetIsSumRelLE(set, val1, val2) ( !EPSP(SCIPrelDiff(val1, val2), (set)->num_sumepsilon) ) #define SCIPsetIsSumRelGT(set, val1, val2) ( EPSP(SCIPrelDiff(val1, val2), (set)->num_sumepsilon) ) #define SCIPsetIsSumRelGE(set, val1, val2) ( !EPSN(SCIPrelDiff(val1, val2), (set)->num_sumepsilon) ) #define SCIPsetIsUpdateUnreliable(set, newvalue, oldvalue) \ ( (ABS(oldvalue) / MAX(ABS(newvalue), set->num_epsilon)) >= set->num_recompfac ) #define SCIPsetInitializeRandomSeed(set, val) ( (val + (set)->random_randomseedshift) ) #define SCIPsetGetSubscipsOff(set) ( (set)->subscipsoff ) #endif #define SCIPsetAllocBuffer(set,ptr) ( (BMSallocBufferMemory((set)->buffer, (ptr)) == NULL) ? SCIP_NOMEMORY : SCIP_OKAY ) #define SCIPsetAllocBufferSize(set,ptr,size) ( (BMSallocBufferMemorySize((set)->buffer, (ptr), (size)) == NULL) ? SCIP_NOMEMORY : SCIP_OKAY ) #define SCIPsetAllocBufferArray(set,ptr,num) ( (BMSallocBufferMemoryArray((set)->buffer, (ptr), (num)) == NULL) ? SCIP_NOMEMORY : SCIP_OKAY ) #define SCIPsetDuplicateBufferSize(set,ptr,source,size) ( (BMSduplicateBufferMemory((set)->buffer, (ptr), (source), (size)) == NULL) ? SCIP_NOMEMORY : SCIP_OKAY ) #define SCIPsetDuplicateBufferArray(set,ptr,source,num) ( (BMSduplicateBufferMemoryArray((set)->buffer, (ptr), (source), (num)) == NULL) ? SCIP_NOMEMORY : SCIP_OKAY ) #define SCIPsetReallocBufferSize(set,ptr,size) ( (BMSreallocBufferMemorySize((set)->buffer, (ptr), (size)) == NULL) ? SCIP_NOMEMORY : SCIP_OKAY ) #define SCIPsetReallocBufferArray(set,ptr,num) ( (BMSreallocBufferMemoryArray((set)->buffer, (ptr), (num)) == NULL) ? SCIP_NOMEMORY : SCIP_OKAY ) #define SCIPsetFreeBuffer(set,ptr) BMSfreeBufferMemory((set)->buffer, (ptr)) #define SCIPsetFreeBufferSize(set,ptr) BMSfreeBufferMemorySize((set)->buffer, (ptr)) #define SCIPsetFreeBufferArray(set,ptr) BMSfreeBufferMemoryArray((set)->buffer, (ptr)) #define SCIPsetAllocCleanBuffer(set,ptr) ( (BMSallocBufferMemory((set)->cleanbuffer, (ptr)) == NULL) ? SCIP_NOMEMORY : SCIP_OKAY ) #define SCIPsetAllocCleanBufferSize(set,ptr,size) ( (BMSallocBufferMemorySize((set)->cleanbuffer, (ptr), (size)) == NULL) ? SCIP_NOMEMORY : SCIP_OKAY ) #define SCIPsetAllocCleanBufferArray(set,ptr,num) ( (BMSallocBufferMemoryArray((set)->cleanbuffer, (ptr), (num)) == NULL) ? SCIP_NOMEMORY : SCIP_OKAY ) #define SCIPsetFreeCleanBuffer(set,ptr) BMSfreeBufferMemory((set)->cleanbuffer, (ptr)) #define SCIPsetFreeCleanBufferSize(set,ptr) BMSfreeBufferMemorySize((set)->cleanbuffer, (ptr)) #define SCIPsetFreeCleanBufferArray(set,ptr) BMSfreeBufferMemoryArray((set)->cleanbuffer, (ptr)) /* if we have a C99 compiler */ #ifdef SCIP_HAVE_VARIADIC_MACROS /** prints a debugging message if SCIP_DEBUG flag is set */ #ifdef SCIP_DEBUG #define SCIPsetDebugMsg(set, ...) SCIPsetPrintDebugMessage(set, __FILE__, __LINE__, __VA_ARGS__) #define SCIPsetDebugMsgPrint(set, ...) SCIPsetDebugMessagePrint(set, __VA_ARGS__) #else #define SCIPsetDebugMsg(set, ...) while ( FALSE ) SCIPsetPrintDebugMessage(set, __FILE__, __LINE__, __VA_ARGS__) #define SCIPsetDebugMsgPrint(set, ...) while ( FALSE ) SCIPsetDebugMessagePrint(set, __VA_ARGS__) #endif #else /* if we do not have a C99 compiler, use a workaround that prints a message, but not the file and linenumber */ /** prints a debugging message if SCIP_DEBUG flag is set */ #ifdef SCIP_DEBUG #define SCIPsetDebugMsg printf("debug: "), SCIPsetDebugMessagePrint #define SCIPsetDebugMsgPrint printf("debug: "), SCIPsetDebugMessagePrint #else #define SCIPsetDebugMsg while ( FALSE ) SCIPsetDebugMsgPrint #define SCIPsetDebugMsgPrint while ( FALSE ) SCIPsetDebugMessagePrint #endif #endif /** prints a debug message */ #ifdef __GNUC__ __attribute__((format(printf, 4, 5))) #endif SCIP_EXPORT void SCIPsetPrintDebugMessage( SCIP_SET* set, /**< global SCIP settings */ const char* sourcefile, /**< name of the source file that called the function */ int sourceline, /**< line in the source file where the function was called */ const char* formatstr, /**< format string like in printf() function */ ... /**< format arguments line in printf() function */ ); /** prints a debug message without precode */ #ifdef __GNUC__ __attribute__((format(printf, 2, 3))) #endif SCIP_EXPORT void SCIPsetDebugMessagePrint( SCIP_SET* set, /**< global SCIP settings */ const char* formatstr, /**< format string like in printf() function */ ... /**< format arguments line in printf() function */ ); #ifdef __cplusplus } #endif #endif