{ "group": { "desc": "DER AC controls model.", "groups": [ { "comments": [ "Power Factor Settings" ], "desc": "Power factor setpoint when injecting active power.", "label": "Power Factor (W Inj) ", "name": "PFWInj", "points": [ { "access": "RW", "desc": "Power factor setpoint when injecting active power.", "label": "Power Factor (W Inj) ", "name": "PF", "sf": "PF_SF", "size": 1, "type": "uint16", "standards": [ "IEEE 1547-2018" ] }, { "access": "RW", "desc": "Power factor excitation setpoint when injecting active power.", "label": "Power Factor Excitation (W Inj)", "name": "Ext", "size": 1, "symbols": [ { "desc": "Power factor over-excited excitation.", "label": "Over-Excited", "name": "OVER_EXCITED", "value": 0 }, { "desc": "Power factor under-excited excitation.", "label": "Under-Excited", "name": "UNDER_EXCITED", "value": 1 } ], "type": "enum16", "standards": [ "IEEE 1547-2018" ] } ], "type": "sync" }, { "desc": "Reversion power factor setpoint when injecting active power.", "label": "Reversion Power Factor (W Inj) ", "name": "PFWInjRvrt", "points": [ { "access": "RW", "desc": "Reversion power factor setpoint when injecting active power.", "label": "Reversion Power Factor (W Inj) ", "name": "PF", "sf": "PF_SF", "size": 1, "type": "uint16", "standards": [] }, { "access": "RW", "desc": "Reversion power factor excitation setpoint when injecting active power.", "label": "Reversion PF Excitation (W Inj)", "name": "Ext", "size": 1, "symbols": [ { "desc": "Power factor over-excited excitation.", "label": "Over-Excited", "name": "OVER_EXCITED", "value": 0 }, { "desc": "Power factor under-excited excitation.", "label": "Under-Excited", "name": "UNDER_EXCITED", "value": 1 } ], "type": "enum16", "standards": [] } ], "type": "sync" }, { "desc": "Power factor setpoint when absorbing active power.", "label": "Power Factor (W Abs) ", "name": "PFWAbs", "points": [ { "access": "RW", "desc": "Power factor setpoint when absorbing active power.", "label": "Power Factor (W Abs) ", "name": "PF", "sf": "PF_SF", "size": 1, "type": "uint16", "standards": [] }, { "access": "RW", "desc": "Power factor excitation setpoint when absorbing active power.", "label": "Power Factor Excitation (W Abs)", "name": "Ext", "size": 1, "symbols": [ { "desc": "Power factor over-excited excitation.", "label": "Over-Excited", "name": "OVER_EXCITED", "value": 0 }, { "desc": "Power factor under-excited excitation.", "label": "Under-Excited", "name": "UNDER_EXCITED", "value": 1 } ], "type": "enum16", "standards": [] } ], "type": "sync" }, { "desc": "Reversion power factor setpoint when absorbing active power.", "label": "Reversion Power Factor (W Abs) ", "name": "PFWAbsRvrt", "points": [ { "access": "RW", "desc": "Reversion power factor setpoint when absorbing active power.", "label": "Reversion Power Factor (W Abs) ", "name": "PF", "sf": "PF_SF", "size": 1, "type": "uint16", "standards": [] }, { "access": "RW", "desc": "Reversion power factor excitation setpoint when absorbing active power.", "label": "Reversion PF Excitation (W Abs)", "name": "Ext", "size": 1, "symbols": [ { "desc": "Power factor over-excited excitation.", "label": "Over-Excited", "name": "OVER_EXCITED", "value": 0 }, { "desc": "Power factor under-excited excitation.", "label": "Under-Excited", "name": "UNDER_EXCITED", "value": 1 } ], "type": "enum16", "standards": [] } ], "type": "sync" } ], "label": "DER AC Controls", "name": "DERCtlAC", "points": [ { "desc": "DER AC controls model ID.", "label": "Model ID", "mandatory": "M", "name": "ID", "size": 1, "static": "S", "type": "uint16", "value": 704, "standards": [ "IEEE 1547-2018" ] }, { "desc": "DER AC controls model length.", "label": "Model Length", "mandatory": "M", "name": "L", "size": 1, "static": "S", "type": "uint16", "value": 65, "standards": [ "IEEE 1547-2018" ] }, { "access": "RW", "comments": [ "Set Power Factor (when injecting active power)" ], "desc": "Power factor enable when injecting active power.", "label": "Power Factor Enable (W Inj) Enable", "name": "PFWInjEna", "size": 1, "symbols": [ { "desc": "Function is disabled.", "label": "Disabled", "name": "DISABLED", "value": 0 }, { "desc": "Function is enabled.", "label": "Enabled", "name": "ENABLED", "value": 1 } ], "type": "enum16", "standards": [ "IEEE 1547-2018" ] }, { "access": "RW", "desc": "Power factor reversion timer when injecting active power enable.", "label": "Power Factor Reversion Enable (W Inj)", "name": "PFWInjEnaRvrt", "size": 1, "symbols": [ { "desc": "Function is disabled.", "label": "Disabled", "name": "DISABLED", "value": 0 }, { "desc": "Function is enabled.", "label": "Enabled", "name": "ENABLED", "value": 1 } ], "type": "enum16", "standards": [] }, { "access": "RW", "desc": "Power factor reversion timer when injecting active power.", "label": "PF Reversion Time (W Inj)", "name": "PFWInjRvrtTms", "size": 2, "type": "uint32", "units": "Secs", "standards": [] }, { "desc": "Power factor reversion time remaining when injecting active power.", "label": "PF Reversion Time Rem (W Inj)", "name": "PFWInjRvrtRem", "size": 2, "type": "uint32", "units": "Secs", "standards": [] }, { "access": "RW", "comments": [ "Set Power Factor (when absorbing active power)" ], "desc": "Power factor enable when absorbing active power.", "label": "Power Factor Enable (W Abs) Enable", "name": "PFWAbsEna", "size": 1, "symbols": [ { "desc": "Function is disabled.", "label": "Disabled", "name": "DISABLED", "value": 0 }, { "desc": "Function is enabled.", "label": "Enabled", "name": "ENABLED", "value": 1 } ], "type": "enum16", "standards": [] }, { "access": "RW", "desc": "Power factor reversion timer when absorbing active power enable.", "label": "Power Factor Reversion Enable (W Abs)", "name": "PFWAbsEnaRvrt", "size": 1, "symbols": [ { "desc": "Function is disabled.", "label": "Disabled", "name": "DISABLED", "value": 0 }, { "desc": "Function is enabled.", "label": "Enabled", "name": "ENABLED", "value": 1 } ], "type": "enum16", "standards": [] }, { "access": "RW", "desc": "Power factor reversion timer when absorbing active power.", "label": "PF Reversion Time (W Abs)", "name": "PFWAbsRvrtTms", "size": 2, "type": "uint32", "units": "Secs", "standards": [] }, { "desc": "Power factor reversion time remaining when absorbing active power.", "label": "PF Reversion Time Rem (W Abs)", "name": "PFWAbsRvrtRem", "size": 2, "type": "uint32", "units": "Secs", "standards": [] }, { "access": "RW", "comments": [ "Limit Maximum Active Power Generation" ], "desc": "Limit maximum active power percent enable.", "label": "Limit Max Power Pct Enable", "name": "WMaxLimPctEna", "size": 1, "symbols": [ { "desc": "Function is disabled.", "label": "Disabled", "name": "DISABLED", "value": 0 }, { "desc": "Function is enabled.", "label": "Enabled", "name": "ENABLED", "value": 1 } ], "type": "enum16", "standards": [ "IEEE 1547-2018" ] }, { "access": "RW", "desc": "Limit maximum active power percent value.", "label": "Limit Max Power Pct Setpoint", "name": "WMaxLimPct", "sf": "WMaxLimPct_SF", "size": 1, "type": "uint16", "units": "Pct", "standards": [ "IEEE 1547-2018" ] }, { "access": "RW", "desc": "Reversion limit maximum active power percent value.", "label": "Reversion Limit Max Power Pct", "name": "WMaxLimPctRvrt", "sf": "WMaxLimPct_SF", "size": 1, "type": "uint16", "units": "Pct", "standards": [] }, { "access": "RW", "desc": "Reversion limit maximum active power percent value enable.", "label": "Reversion Limit Max Power Pct Enable", "name": "WMaxLimPctEnaRvrt", "size": 1, "symbols": [ { "desc": "Function is disabled.", "label": "Disabled", "name": "DISABLED", "value": 0 }, { "desc": "Function is enabled.", "label": "Enabled", "name": "ENABLED", "value": 1 } ], "type": "enum16", "standards": [] }, { "access": "RW", "desc": "Limit maximum active power percent reversion time.", "label": "Limit Max Power Pct Reversion Time", "name": "WMaxLimPctRvrtTms", "size": 2, "type": "uint32", "units": "Secs", "standards": [] }, { "desc": "Limit maximum active power percent reversion time remaining.", "label": "Limit Max Power Pct Rev Time Rem", "name": "WMaxLimPctRvrtRem", "size": 2, "type": "uint32", "units": "Secs", "standards": [] }, { "access": "RW", "comments": [ "Set Active Power Level (may be negative for charging)" ], "desc": "Set active power enable.", "label": "Set Active Power Enable", "name": "WSetEna", "size": 1, "symbols": [ { "desc": "Function is disabled.", "label": "Disabled", "name": "DISABLED", "value": 0 }, { "desc": "Function is enabled.", "label": "Enabled", "name": "ENABLED", "value": 1 } ], "type": "enum16", "standards": [] }, { "access": "RW", "desc": "Set active power mode.", "label": "Set Active Power Mode", "name": "WSetMod", "size": 1, "symbols": [ { "desc": "Active power setting is percentage of maximum active power.", "label": "Active Power As Max Percent", "name": "W_MAX_PCT", "value": 0 }, { "desc": "Active power setting is in watts.", "label": "Active Power As Watts", "name": "WATTS", "value": 1 } ], "type": "enum16", "standards": [] }, { "access": "RW", "desc": "Active power setting value in watts.", "label": "Active Power Setpoint (W)", "name": "WSet", "sf": "WSet_SF", "size": 2, "type": "int32", "units": "W", "standards": [] }, { "access": "RW", "desc": "Reversion active power setting value in watts.", "label": "Reversion Active Power (W)", "name": "WSetRvrt", "sf": "WSet_SF", "size": 2, "type": "int32", "units": "W", "standards": [] }, { "access": "RW", "desc": "Active power setting value as percent.", "label": "Active Power Setpoint (Pct)", "name": "WSetPct", "sf": "WSetPct_SF", "size": 1, "type": "int16", "units": "Pct", "standards": [] }, { "access": "RW", "desc": "Reversion active power setting value as percent.", "label": "Reversion Active Power (Pct)", "name": "WSetPctRvrt", "sf": "WSetPct_SF", "size": 1, "type": "int16", "units": "Pct", "standards": [] }, { "access": "RW", "desc": "Reversion active power function enable.", "label": "Reversion Active Power Enable", "name": "WSetEnaRvrt", "size": 1, "symbols": [ { "desc": "Function is disabled.", "label": "Disabled", "name": "DISABLED", "value": 0 }, { "desc": "Function is enabled.", "label": "Enabled", "name": "ENABLED", "value": 1 } ], "type": "enum16", "standards": [] }, { "access": "RW", "desc": "Set active power reversion time.", "label": "Active Power Reversion Time", "name": "WSetRvrtTms", "size": 2, "type": "uint32", "units": "Secs", "standards": [] }, { "desc": "Set active power reversion time remaining.", "label": "Active Power Rev Time Rem", "name": "WSetRvrtRem", "size": 2, "type": "uint32", "units": "Secs", "standards": [] }, { "access": "RW", "comments": [ "Set Reactive Power Level" ], "desc": "Set reactive power enable.", "label": "Set Reactive Power Enable", "name": "VarSetEna", "size": 1, "symbols": [ { "desc": "Function is disabled.", "label": "Disabled", "name": "DISABLED", "value": 0 }, { "desc": "Function is enabled.", "label": "Enabled", "name": "ENABLED", "value": 1 } ], "type": "enum16", "standards": [ "IEEE 1547-2018" ] }, { "access": "RW", "desc": "Set reactive power mode.", "label": "Set Reactive Power Mode", "name": "VarSetMod", "size": 1, "symbols": [ { "desc": "Reactive power setting is percent of maximum active power.", "label": "Reactive Power As Watt Max Pct", "name": "W_MAX_PCT", "value": 0 }, { "desc": "Reactive power setting is percent of maximum reactive power.", "label": "Reactive Power As Var Max Pct", "name": "VAR_MAX_PCT", "value": 1 }, { "desc": "Reactive power setting is percent of available reactive power.", "label": "Reactive Power As Var Avail Pct", "name": "VAR_AVAIL_PCT", "value": 2 }, { "desc": "Reactive power setting is percent of maximum apparent power.", "label": "Reactive Power As VA Max Pct", "name": "VA_MAX_PCT", "value": 3 }, { "desc": "Reactive power is in vars.", "label": "Reactive Power As Vars", "name": "VARS", "value": 4 } ], "type": "enum16", "standards": [ "IEEE 1547-2018" ] }, { "access": "RW", "desc": "Reactive power priority.", "label": "Reactive Power Priority", "name": "VarSetPri", "size": 1, "symbols": [ { "desc": "Active power priority.", "label": "Active Power Priority", "name": "ACTIVE", "value": 0 }, { "desc": "Reactive power priority.", "label": "Reactive Power Priority", "name": "REACTIVE", "value": 1 }, { "desc": "Power priority is vendor specific mode.", "label": "Vendor Power Priority", "name": "VENDOR", "value": 2 } ], "type": "enum16", "standards": [ "IEEE 1547-2018" ] }, { "access": "RW", "desc": "Reactive power setting value in vars.", "label": "Reactive Power Setpoint (Vars)", "name": "VarSet", "sf": "VarSet_SF", "size": 2, "type": "int32", "units": "Var", "standards": [] }, { "access": "RW", "desc": "Reversion reactive power setting value in vars.", "label": "Reversion Reactive Power (Vars)", "name": "VarSetRvrt", "sf": "VarSet_SF", "size": 2, "type": "int32", "units": "Var", "standards": [] }, { "access": "RW", "desc": "Reactive power setting value as percent.", "label": "Reactive Power Setpoint (Pct)", "name": "VarSetPct", "sf": "VarSetPct_SF", "size": 1, "type": "int16", "units": "Pct", "standards": [ "IEEE 1547-2018" ] }, { "access": "RW", "desc": "Reversion reactive power setting value as percent.", "label": "Reversion Reactive Power (Pct)", "name": "VarSetPctRvrt", "sf": "VarSetPct_SF", "size": 1, "type": "int16", "units": "Pct", "standards": [] }, { "access": "RW", "desc": "Reversion reactive power function enable.", "label": "Reversion Reactive Power Enable", "name": "VarSetEnaRvrt", "size": 1, "symbols": [ { "desc": "Function is disabled.", "label": "Disabled", "name": "DISABLED", "value": 0 }, { "desc": "Function is enabled.", "label": "Enabled", "name": "ENABLED", "value": 1 } ], "type": "enum16", "standards": [] }, { "access": "RW", "desc": "Set reactive power reversion time.", "label": "Reactive Power Reversion Time", "name": "VarSetRvrtTms", "size": 2, "type": "uint32", "units": "Secs", "standards": [] }, { "desc": "Set reactive power reversion time remaining.", "label": "Reactive Power Rev Time Rem", "name": "VarSetRvrtRem", "size": 2, "type": "uint32", "units": "Secs", "standards": [] }, { "access": "RW", "comments": [ "Ramp Rate" ], "desc": "Ramp rate for increases in active power during normal generation.", "label": "Normal Ramp Rate", "name": "WRmp", "size": 1, "type": "uint16", "units": "%Max/Sec", "standards": [] }, { "access": "RW", "desc": "Ramp rate reference unit for increases in active power or current during normal generation.", "label": "Normal Ramp Rate Reference", "name": "WRmpRef", "size": 1, "symbols": [ { "desc": "Ramp based on percent of max current per second.", "label": "Max Current Ramp", "name": "A_MAX", "value": 0 }, { "desc": "Ramp based on percent of max active power per second.", "label": "Max Active Power Ramp", "name": "W_MAX", "value": 1 } ], "type": "enum16", "standards": [] }, { "access": "RW", "desc": "Ramp rate based on max reactive power per second.", "label": "Reactive Power Ramp Rate", "name": "VarRmp", "size": 1, "type": "uint16", "units": "%Max/Sec", "standards": [] }, { "access": "RW", "desc": "Anti-islanding enable.", "label": "Anti-Islanding Enable", "name": "AntiIslEna", "size": 1, "symbols": [ { "desc": "Anti-islanding is disabled.", "label": "Disabled", "name": "DISABLED", "value": 0 }, { "desc": "Anti-islanding is enabled.", "label": "Enabled", "name": "ENABLED", "value": 1 } ], "type": "enum16", "standards": [] }, { "comments": [ "Scale Factors" ], "desc": "Power factor scale factor.", "label": "Power Factor Scale Factor", "name": "PF_SF", "size": 1, "static": "S", "type": "sunssf", "standards": [ "IEEE 1547-2018" ] }, { "desc": "Limit maximum power scale factor.", "label": "Limit Max Power Scale Factor", "name": "WMaxLimPct_SF", "size": 1, "static": "S", "type": "sunssf", "standards": [ "IEEE 1547-2018" ] }, { "desc": "Active power scale factor.", "label": "Active Power Scale Factor", "name": "WSet_SF", "size": 1, "static": "S", "type": "sunssf", "standards": [] }, { "desc": "Active power pct scale factor.", "label": "Active Power Pct Scale Factor", "name": "WSetPct_SF", "size": 1, "static": "S", "type": "sunssf", "standards": [] }, { "desc": "Reactive power scale factor.", "label": "Reactive Power Scale Factor", "name": "VarSet_SF", "size": 1, "static": "S", "type": "sunssf", "standards": [] }, { "desc": "Reactive power pct scale factor.", "label": "Reactive Power Pct Scale Factor", "name": "VarSetPct_SF", "size": 1, "static": "S", "type": "sunssf", "standards": [ "IEEE 1547-2018" ] } ], "type": "group" }, "id": 704 }