0 1 2 0 1 Volt-Watt Ref 3: 8.12.1.2 Number of curves supported (recommend min. 4). Number of points in array (maximum 20). Is Volt-Watt control active. Index of active curve. 0=no active curve. Time window for volt-watt change. Timeout period for volt-watt curve selection. Ramp time for moving from current mode to new mode. Scale factor for percent VRef. Scale factor for % DeptRef. Scale factor for increment and decrement ramps. Optional description for curve. Number of active points in array. Defines the meaning of the Watts DeptRef. 1=% WMax 2=% WAvail Scale Factor for % DeptRef The time of the PT1 in seconds (time to accomplish a change of 95%). The maximum rate at which the watt value may be reduced in response to changes in the voltage value. The maximum rate at which the watt value may be increased in response to changes in the voltage value. Point 1 Volts. Point 1 Watts. Point 2 Volts. Point 2 Watts. Point 3 Volts. Point 3 Watts. Point 4 Volts. Point 4 Watts. Point 5 Volts. Point 5 Watts. Point 6 Volts. Point 6 Watts. Point 7 Volts. Point 7 Watts. Point 8 Volts. Point 8 Watts. Point 9 Volts. Point 9 Watts. Point 10 Volts. Point 10 Watts. Point 11 Volts. Point 11 Watts. Point 12 Volts. Point 12 Watts. Point 13 Volts. Point 13 Watts. Point 14 Volts. Point 14 Watts. Point 15 Volts. Point 15 Watts. Point 16 Volts. Point 16 Watts. Point 17 Volts. Point 17 Watts. Point 18 Volts. Point 18 Watts. Point 19 Volts. Point 19 Watts. Point 20 Volts. Point 20 Watts. Enumerated value indicates if curve is read-only or can be modified.