0 1 2 3 4 5 0 1 0 1 2 3 0 1 Generac Inverter Arbitrage Control Power control model for PWRcell System Operating Mode System operating mode must be in Sysmode 5, ARBITRAGE, for the controls in this model to take effect. It is read-only in this model. This parameter can be changed from model 64200 on the device at Modbus slave ID 1 Max real power Maximum real power magnitude applies to import and export power levels Max reactive power Maximum reactive power magnitude applies to import and export power levels Real power target target real power - -100.0% to +100.0% of PMax take note of scale factor: -1000 to 1000 corresponds to -100.0% to 100.0% Reactive power target target reactive power - -100.0% to +100.0% of QMax take note of scale factor: -1000 to 1000 corresponds to -100.0% to 100.0% Ramp rate ramp rate for slewing power to target applies to both active and reactive slewing PQMax_SF scale factor for max power applies to both active and reactive power levels PQLimPct_SF scale factor for target power percentages applies to both active and reactive power levels PQGra_SF scale factor for ramp rate Control priority set control priority to real or reactive target Enable arbitrage control activate PQ control settings must set this flag to ENABLE or UPDATE for new settings to take effect Connect enable/disable inverter