0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 0 1 2 Utility Compliance Configuration Configure inverter settings based on utility requirements Compliance selection Select which utility your inverter is being installed under. Inverter must be disabled for this selection to take effect. Different utilities require different inverter settings. This selection will define which utility settings the inverter will use. The selections will be listed with utility names and geographical locations. IEEE 1547-2003 (default) 'IEEE 1547' is the most common inverter compliance setting. HECO SRD V1.1 Configure for HI Rule 14H Islands of O'ahu, Maui, Hawai'i (Big Island). If your installation is not on one of these islands, do not use this selection. For other islands contact Generac for information. HECO SRD V1.1 [L+M] Configure for HI Rule 14H (Lana'i, Moloka'i) For other islands contact Generac for information. Rule 21 2017 Configure for California Rule 21 settings. PREPA 2017 Configure for Puerto Rico (PREPA) settings. ISO-NE (1547a-2014) Configure ISO New England settings. LADWP 2019 Configure City of Los Angeles settings. PECO (deprecated) Configure PECO settings. MISO (deprecated) Configure MISO settings. LPEA 2019 KIUC 2021 PECO 2021 RULE 21 2019 MISO 1547-2018 IEEE 1547-2018 HECO SRD V2.0 PREPA 2023 AmerenIL Std 2018 AmerenIL Rebate 2018 BC Hydro 2014 ISO-NE 2023 Rule 21 2023 National Grid NY 2023 NYSEG + RG&E 2023 PSEG-LI 2023 ORU 2023 CHG&E 2023 IEEE 1547a-2014 IEEE 1547-2003 (ReConnV 7.5%) IEEE 1547-2003 (ReConnV 10%) MWEC 2023 LADWP 2023 Defaulted Indicates whether or not the default settings from the Compliance Selection field have been applied. Note that this field will only update after your press submit.