Game Boy Sound Hardware Tests ----------------------------- These tests verify aspects of the sound hardware that the CPU can observe. The ROMs and GBSs are either for DMG or CGB hardware, as there are several differences. Multi-ROM --------- In the main directory is a single ROM/GBS which runs all the tests. It prints a test's number, runs the test, then "ok" if it passes, otherwise a failure code. Once all tests have completed it either reports that all tests passed, or reports the number of the first failed test as the result code (1 = first). Finally, it makes several beeps. If a test fails, it can be run on its own by finding the corresponding ROM/GBS in the singles directories. Ths compact format on screen is to avoid having the results scroll off the top, so the test can be started and allowed to run without having to constantly monitor the display. Failure information ------------------- For more information about a failure code or information printed, see the test's source code in source/. To find failure code N, search for "set_test N", which will usually be before the subtest which failed. Flashes, clicks, other glitches ------------------------------- Some tests might need to turn the screen off and on, or cause slight audio clicks. This does not indicate failure, and should be ignored. Only the test result reported at the end is important, unless stated otherwise. LCD support ----------- Tests generally print information on screen. The tests will work fine if run on an emulator with NO LCD support, or as an GBS which has no inherent screen; in particular, the VBL wait routine has a timeout in case LY doesn't reflect the current LCD line. The text printing will also work if the LCD doesn't support scrolling. Output to memory ---------------- Text output and the final result are also written to memory at $A000, allowing testing a very minimal emulator that supports little more than CPU and RAM. To reliably indicate that the data is from a test and not random data, $A001-$A003 are written with a signature: $DE,$B0,$61. If this is present, then the text string and final result status are valid. $A000 holds the overall status. If the test is still running, it holds $80, otherwise it holds the final result code. All text output is appended to a zero-terminated string at $A004. An emulator could regularly check this string for any additional characters, and output them, allowing real-time text output, rather than just printing the final output at the end. GBS versions ------------ Many GBS-based tests require that the GBS player either not interrupt the init routine with the play routine, or if they do, not interrupt the play routine again if it hasn't returned yet. This is because many tests need to run for a while without returning. In addition to the other text output methods described above, GBS builds report essential information bytes audibly, including the final result. A byte is reported as a series of tones. The code is in binary, with a low tone for 0 and a high tone for 1. The first tone is always a zero. A final code of 0 means passed, 1 means failure, and 2 or higher indicates a specific reason as listed in the source code by the corresponding set_code line. Examples: Tones Binary Decimal Meaning - - - - - - - - - - - - - - - - - - - - low 0 0 passed low high 01 1 failed low high low 010 2 error 2 -- Shay Green