//
// Copyright 2016 Pixar
//
// Licensed under the Apache License, Version 2.0 (the "Apache License")
// with the following modification; you may not use this file except in
// compliance with the Apache License and the following modification to it:
// Section 6. Trademarks. is deleted and replaced with:
//
// 6. Trademarks. This License does not grant permission to use the trade
//    names, trademarks, service marks, or product names of the Licensor
//    and its affiliates, except as required to comply with Section 4(c) of
//    the License and to reproduce the content of the NOTICE file.
//
// You may obtain a copy of the Apache License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the Apache License with the above modification is
// distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
// KIND, either express or implied. See the Apache License for the specific
// language governing permissions and limitations under the Apache License.
//
#ifndef USDGEOM_GENERATED_CONE_H
#define USDGEOM_GENERATED_CONE_H

/// \file usdGeom/cone.h

#include "pxr/pxr.h"
#include "pxr/usd/usdGeom/api.h"
#include "pxr/usd/usdGeom/gprim.h"
#include "pxr/usd/usd/prim.h"
#include "pxr/usd/usd/stage.h"
#include "pxr/usd/usdGeom/tokens.h"

#include "pxr/base/vt/value.h"

#include "pxr/base/gf/vec3d.h"
#include "pxr/base/gf/vec3f.h"
#include "pxr/base/gf/matrix4d.h"

#include "pxr/base/tf/token.h"
#include "pxr/base/tf/type.h"

PXR_NAMESPACE_OPEN_SCOPE

class SdfAssetPath;

// -------------------------------------------------------------------------- //
// CONE                                                                       //
// -------------------------------------------------------------------------- //

/// \class UsdGeomCone
///
/// Defines a primitive cone, centered at the origin, whose spine
/// is along the specified \em axis, with the apex of the cone pointing
/// in the direction of the positive axis.
/// 
/// The fallback values for Cube, Sphere, Cone, and Cylinder are set so that
/// they all pack into the same volume/bounds.
///
/// For any described attribute \em Fallback \em Value or \em Allowed \em Values below
/// that are text/tokens, the actual token is published and defined in \ref UsdGeomTokens.
/// So to set an attribute to the value "rightHanded", use UsdGeomTokens->rightHanded
/// as the value.
///
class UsdGeomCone : public UsdGeomGprim
{
public:
    /// Compile time constant representing what kind of schema this class is.
    ///
    /// \sa UsdSchemaType
    static const UsdSchemaType schemaType = UsdSchemaType::ConcreteTyped;

    /// Construct a UsdGeomCone on UsdPrim \p prim .
    /// Equivalent to UsdGeomCone::Get(prim.GetStage(), prim.GetPath())
    /// for a \em valid \p prim, but will not immediately throw an error for
    /// an invalid \p prim
    explicit UsdGeomCone(const UsdPrim& prim=UsdPrim())
        : UsdGeomGprim(prim)
    {
    }

    /// Construct a UsdGeomCone on the prim held by \p schemaObj .
    /// Should be preferred over UsdGeomCone(schemaObj.GetPrim()),
    /// as it preserves SchemaBase state.
    explicit UsdGeomCone(const UsdSchemaBase& schemaObj)
        : UsdGeomGprim(schemaObj)
    {
    }

    /// Destructor.
    USDGEOM_API
    virtual ~UsdGeomCone();

    /// Return a vector of names of all pre-declared attributes for this schema
    /// class and all its ancestor classes.  Does not include attributes that
    /// may be authored by custom/extended methods of the schemas involved.
    USDGEOM_API
    static const TfTokenVector &
    GetSchemaAttributeNames(bool includeInherited=true);

    /// Return a UsdGeomCone holding the prim adhering to this
    /// schema at \p path on \p stage.  If no prim exists at \p path on
    /// \p stage, or if the prim at that path does not adhere to this schema,
    /// return an invalid schema object.  This is shorthand for the following:
    ///
    /// \code
    /// UsdGeomCone(stage->GetPrimAtPath(path));
    /// \endcode
    ///
    USDGEOM_API
    static UsdGeomCone
    Get(const UsdStagePtr &stage, const SdfPath &path);

    /// Attempt to ensure a \a UsdPrim adhering to this schema at \p path
    /// is defined (according to UsdPrim::IsDefined()) on this stage.
    ///
    /// If a prim adhering to this schema at \p path is already defined on this
    /// stage, return that prim.  Otherwise author an \a SdfPrimSpec with
    /// \a specifier == \a SdfSpecifierDef and this schema's prim type name for
    /// the prim at \p path at the current EditTarget.  Author \a SdfPrimSpec s
    /// with \p specifier == \a SdfSpecifierDef and empty typeName at the
    /// current EditTarget for any nonexistent, or existing but not \a Defined
    /// ancestors.
    ///
    /// The given \a path must be an absolute prim path that does not contain
    /// any variant selections.
    ///
    /// If it is impossible to author any of the necessary PrimSpecs, (for
    /// example, in case \a path cannot map to the current UsdEditTarget's
    /// namespace) issue an error and return an invalid \a UsdPrim.
    ///
    /// Note that this method may return a defined prim whose typeName does not
    /// specify this schema class, in case a stronger typeName opinion overrides
    /// the opinion at the current EditTarget.
    ///
    USDGEOM_API
    static UsdGeomCone
    Define(const UsdStagePtr &stage, const SdfPath &path);

protected:
    /// Returns the type of schema this class belongs to.
    ///
    /// \sa UsdSchemaType
    USDGEOM_API
    UsdSchemaType _GetSchemaType() const override;

private:
    // needs to invoke _GetStaticTfType.
    friend class UsdSchemaRegistry;
    USDGEOM_API
    static const TfType &_GetStaticTfType();

    static bool _IsTypedSchema();

    // override SchemaBase virtuals.
    USDGEOM_API
    const TfType &_GetTfType() const override;

public:
    // --------------------------------------------------------------------- //
    // HEIGHT 
    // --------------------------------------------------------------------- //
    /// The size of the cone's spine along the specified
    /// \em axis.  If you author \em height you must also author \em extent.
    /// 
    /// \sa GetExtentAttr()
    ///
    /// | ||
    /// | -- | -- |
    /// | Declaration | `double height = 2` |
    /// | C++ Type | double |
    /// | \ref Usd_Datatypes "Usd Type" | SdfValueTypeNames->Double |
    USDGEOM_API
    UsdAttribute GetHeightAttr() const;

    /// See GetHeightAttr(), and also 
    /// \ref Usd_Create_Or_Get_Property for when to use Get vs Create.
    /// If specified, author \p defaultValue as the attribute's default,
    /// sparsely (when it makes sense to do so) if \p writeSparsely is \c true -
    /// the default for \p writeSparsely is \c false.
    USDGEOM_API
    UsdAttribute CreateHeightAttr(VtValue const &defaultValue = VtValue(), bool writeSparsely=false) const;

public:
    // --------------------------------------------------------------------- //
    // RADIUS 
    // --------------------------------------------------------------------- //
    /// The radius of the cone.  If you
    /// author \em radius you must also author \em extent.
    /// 
    /// \sa GetExtentAttr()
    ///
    /// | ||
    /// | -- | -- |
    /// | Declaration | `double radius = 1` |
    /// | C++ Type | double |
    /// | \ref Usd_Datatypes "Usd Type" | SdfValueTypeNames->Double |
    USDGEOM_API
    UsdAttribute GetRadiusAttr() const;

    /// See GetRadiusAttr(), and also 
    /// \ref Usd_Create_Or_Get_Property for when to use Get vs Create.
    /// If specified, author \p defaultValue as the attribute's default,
    /// sparsely (when it makes sense to do so) if \p writeSparsely is \c true -
    /// the default for \p writeSparsely is \c false.
    USDGEOM_API
    UsdAttribute CreateRadiusAttr(VtValue const &defaultValue = VtValue(), bool writeSparsely=false) const;

public:
    // --------------------------------------------------------------------- //
    // AXIS 
    // --------------------------------------------------------------------- //
    /// The axis along which the spine of the cone is aligned
    ///
    /// | ||
    /// | -- | -- |
    /// | Declaration | `uniform token axis = "Z"` |
    /// | C++ Type | TfToken |
    /// | \ref Usd_Datatypes "Usd Type" | SdfValueTypeNames->Token |
    /// | \ref SdfVariability "Variability" | SdfVariabilityUniform |
    /// | \ref UsdGeomTokens "Allowed Values" | X, Y, Z |
    USDGEOM_API
    UsdAttribute GetAxisAttr() const;

    /// See GetAxisAttr(), and also 
    /// \ref Usd_Create_Or_Get_Property for when to use Get vs Create.
    /// If specified, author \p defaultValue as the attribute's default,
    /// sparsely (when it makes sense to do so) if \p writeSparsely is \c true -
    /// the default for \p writeSparsely is \c false.
    USDGEOM_API
    UsdAttribute CreateAxisAttr(VtValue const &defaultValue = VtValue(), bool writeSparsely=false) const;

public:
    // --------------------------------------------------------------------- //
    // EXTENT 
    // --------------------------------------------------------------------- //
    /// Extent is re-defined on Cone only to provide a fallback
    /// value. \sa UsdGeomGprim::GetExtentAttr().
    ///
    /// | ||
    /// | -- | -- |
    /// | Declaration | `float3[] extent = [(-1, -1, -1), (1, 1, 1)]` |
    /// | C++ Type | VtArray<GfVec3f> |
    /// | \ref Usd_Datatypes "Usd Type" | SdfValueTypeNames->Float3Array |
    USDGEOM_API
    UsdAttribute GetExtentAttr() const;

    /// See GetExtentAttr(), and also 
    /// \ref Usd_Create_Or_Get_Property for when to use Get vs Create.
    /// If specified, author \p defaultValue as the attribute's default,
    /// sparsely (when it makes sense to do so) if \p writeSparsely is \c true -
    /// the default for \p writeSparsely is \c false.
    USDGEOM_API
    UsdAttribute CreateExtentAttr(VtValue const &defaultValue = VtValue(), bool writeSparsely=false) const;

public:
    // ===================================================================== //
    // Feel free to add custom code below this line, it will be preserved by 
    // the code generator. 
    //
    // Just remember to: 
    //  - Close the class declaration with }; 
    //  - Close the namespace with PXR_NAMESPACE_CLOSE_SCOPE
    //  - Close the include guard with #endif
    // ===================================================================== //
    // --(BEGIN CUSTOM CODE)--

    /// Compute the extent for the cone defined by the height, radius, and
    /// axis.
    ///
    /// \return true upon success, false if unable to calculate extent.
    ///
    /// On success, extent will contain an approximate axis-aligned bounding 
    /// box of the cone defined by the height, radius, and axis.
    ///
    /// This function is to provide easy authoring of extent for usd authoring 
    /// tools, hence it is static and acts outside a specific prim (as in 
    /// attribute based methods).
    USDGEOM_API
    static bool ComputeExtent(double height, double radius, const TfToken& axis,
        VtVec3fArray* extent);

    /// \overload
    /// Computes the extent as if the matrix \p transform was first applied.
    USDGEOM_API
    static bool ComputeExtent(double height, double radius, const TfToken& axis,
        const GfMatrix4d& transform, VtVec3fArray* extent);
};

PXR_NAMESPACE_CLOSE_SCOPE

#endif