interface tcp { use wasi:io/streams.{input-stream, output-stream} use wasi:poll/poll.{pollable} use network.{network, error-code, ip-socket-address, ip-address-family} /// A TCP socket handle. type tcp-socket = u32 enum shutdown-type { /// Similar to `SHUT_RD` in POSIX. receive, /// Similar to `SHUT_WR` in POSIX. send, /// Similar to `SHUT_RDWR` in POSIX. both, } /// Bind the socket to a specific network on the provided IP address and port. /// /// If the IP address is zero (`0.0.0.0` in IPv4, `::` in IPv6), it is left to the implementation to decide which /// network interface(s) to bind to. /// If the TCP/UDP port is zero, the socket will be bound to a random free port. /// /// When a socket is not explicitly bound, the first invocation to a listen or connect operation will /// implicitly bind the socket. /// /// Unlike in POSIX, this function is async. This enables interactive WASI hosts to inject permission prompts. /// /// # Typical `start` errors /// - `address-family-mismatch`: The `local-address` has the wrong address family. (EINVAL) /// - `already-bound`: The socket is already bound. (EINVAL) /// - `concurrency-conflict`: Another `bind`, `connect` or `listen` operation is already in progress. (EALREADY) /// /// # Typical `finish` errors /// - `ephemeral-ports-exhausted`: No ephemeral ports available. (EADDRINUSE, ENOBUFS on Windows) /// - `address-in-use`: Address is already in use. (EADDRINUSE) /// - `address-not-bindable`: `local-address` is not an address that the `network` can bind to. (EADDRNOTAVAIL) /// - `not-in-progress`: A `bind` operation is not in progress. /// - `would-block`: Can't finish the operation, it is still in progress. (EWOULDBLOCK, EAGAIN) /// /// # References /// - /// - /// - /// - start-bind: func(this: tcp-socket, network: network, local-address: ip-socket-address) -> result<_, error-code> finish-bind: func(this: tcp-socket) -> result<_, error-code> /// Connect to a remote endpoint. /// /// On success: /// - the socket is transitioned into the Connection state /// - a pair of streams is returned that can be used to read & write to the connection /// /// # Typical `start` errors /// - `address-family-mismatch`: The `remote-address` has the wrong address family. (EAFNOSUPPORT) /// - `invalid-remote-address`: The IP address in `remote-address` is set to INADDR_ANY (`0.0.0.0` / `::`). (EADDRNOTAVAIL on Windows) /// - `invalid-remote-address`: The port in `remote-address` is set to 0. (EADDRNOTAVAIL on Windows) /// - `already-attached`: The socket is already attached to a different network. The `network` passed to `connect` must be identical to the one passed to `bind`. /// - `already-connected`: The socket is already in the Connection state. (EISCONN) /// - `already-listening`: The socket is already in the Listener state. (EOPNOTSUPP, EINVAL on Windows) /// - `concurrency-conflict`: Another `bind`, `connect` or `listen` operation is already in progress. (EALREADY) /// /// # Typical `finish` errors /// - `timeout`: Connection timed out. (ETIMEDOUT) /// - `connection-refused`: The connection was forcefully rejected. (ECONNREFUSED) /// - `connection-reset`: The connection was reset. (ECONNRESET) /// - `remote-unreachable`: The remote address is not reachable. (EHOSTUNREACH, EHOSTDOWN, ENETUNREACH, ENETDOWN) /// - `ephemeral-ports-exhausted`: Tried to perform an implicit bind, but there were no ephemeral ports available. (EADDRINUSE, EADDRNOTAVAIL on Linux, EAGAIN on BSD) /// - `not-in-progress`: A `connect` operation is not in progress. /// - `would-block`: Can't finish the operation, it is still in progress. (EWOULDBLOCK, EAGAIN) /// /// # References /// - /// - /// - /// - start-connect: func(this: tcp-socket, network: network, remote-address: ip-socket-address) -> result<_, error-code> finish-connect: func(this: tcp-socket) -> result, error-code> /// Start listening for new connections. /// /// Transitions the socket into the Listener state. /// /// Unlike POSIX: /// - this function is async. This enables interactive WASI hosts to inject permission prompts. /// - the socket must already be explicitly bound. /// /// # Typical `start` errors /// - `not-bound`: The socket is not bound to any local address. (EDESTADDRREQ) /// - `already-connected`: The socket is already in the Connection state. (EISCONN, EINVAL on BSD) /// - `already-listening`: The socket is already in the Listener state. /// - `concurrency-conflict`: Another `bind`, `connect` or `listen` operation is already in progress. (EINVAL on BSD) /// /// # Typical `finish` errors /// - `ephemeral-ports-exhausted`: Tried to perform an implicit bind, but there were no ephemeral ports available. (EADDRINUSE) /// - `not-in-progress`: A `listen` operation is not in progress. /// - `would-block`: Can't finish the operation, it is still in progress. (EWOULDBLOCK, EAGAIN) /// /// # References /// - /// - /// - /// - start-listen: func(this: tcp-socket) -> result<_, error-code> finish-listen: func(this: tcp-socket) -> result<_, error-code> /// Accept a new client socket. /// /// The returned socket is bound and in the Connection state. /// /// On success, this function returns the newly accepted client socket along with /// a pair of streams that can be used to read & write to the connection. /// /// # Typical errors /// - `not-listening`: Socket is not in the Listener state. (EINVAL) /// - `would-block`: No pending connections at the moment. (EWOULDBLOCK, EAGAIN) /// /// Host implementations must skip over transient errors returned by the native accept syscall. /// /// # References /// - /// - /// - /// - accept: func(this: tcp-socket) -> result, error-code> /// Get the bound local address. /// /// # Typical errors /// - `not-bound`: The socket is not bound to any local address. /// /// # References /// - /// - /// - /// - local-address: func(this: tcp-socket) -> result /// Get the bound remote address. /// /// # Typical errors /// - `not-connected`: The socket is not connected to a remote address. (ENOTCONN) /// /// # References /// - /// - /// - /// - remote-address: func(this: tcp-socket) -> result /// Whether this is a IPv4 or IPv6 socket. /// /// Equivalent to the SO_DOMAIN socket option. address-family: func(this: tcp-socket) -> ip-address-family /// Whether IPv4 compatibility (dual-stack) mode is disabled or not. /// /// Equivalent to the IPV6_V6ONLY socket option. /// /// # Typical errors /// - `ipv6-only-operation`: (get/set) `this` socket is an IPv4 socket. /// - `already-bound`: (set) The socket is already bound. /// - `not-supported`: (set) Host does not support dual-stack sockets. (Implementations are not required to.) /// - `concurrency-conflict`: (set) A `bind`, `connect` or `listen` operation is already in progress. (EALREADY) ipv6-only: func(this: tcp-socket) -> result set-ipv6-only: func(this: tcp-socket, value: bool) -> result<_, error-code> /// Hints the desired listen queue size. Implementations are free to ignore this. /// /// # Typical errors /// - `already-connected`: (set) The socket is already in the Connection state. /// - `concurrency-conflict`: (set) A `bind`, `connect` or `listen` operation is already in progress. (EALREADY) set-listen-backlog-size: func(this: tcp-socket, value: u64) -> result<_, error-code> /// Equivalent to the SO_KEEPALIVE socket option. /// /// # Typical errors /// - `concurrency-conflict`: (set) A `bind`, `connect` or `listen` operation is already in progress. (EALREADY) keep-alive: func(this: tcp-socket) -> result set-keep-alive: func(this: tcp-socket, value: bool) -> result<_, error-code> /// Equivalent to the TCP_NODELAY socket option. /// /// # Typical errors /// - `concurrency-conflict`: (set) A `bind`, `connect` or `listen` operation is already in progress. (EALREADY) no-delay: func(this: tcp-socket) -> result set-no-delay: func(this: tcp-socket, value: bool) -> result<_, error-code> /// Equivalent to the IP_TTL & IPV6_UNICAST_HOPS socket options. /// /// # Typical errors /// - `already-connected`: (set) The socket is already in the Connection state. /// - `already-listening`: (set) The socket is already in the Listener state. /// - `concurrency-conflict`: (set) A `bind`, `connect` or `listen` operation is already in progress. (EALREADY) unicast-hop-limit: func(this: tcp-socket) -> result set-unicast-hop-limit: func(this: tcp-socket, value: u8) -> result<_, error-code> /// The kernel buffer space reserved for sends/receives on this socket. /// /// Note #1: an implementation may choose to cap or round the buffer size when setting the value. /// In other words, after setting a value, reading the same setting back may return a different value. /// /// Note #2: there is not necessarily a direct relationship between the kernel buffer size and the bytes of /// actual data to be sent/received by the application, because the kernel might also use the buffer space /// for internal metadata structures. /// /// Equivalent to the SO_RCVBUF and SO_SNDBUF socket options. /// /// # Typical errors /// - `already-connected`: (set) The socket is already in the Connection state. /// - `already-listening`: (set) The socket is already in the Listener state. /// - `concurrency-conflict`: (set) A `bind`, `connect` or `listen` operation is already in progress. (EALREADY) receive-buffer-size: func(this: tcp-socket) -> result set-receive-buffer-size: func(this: tcp-socket, value: u64) -> result<_, error-code> send-buffer-size: func(this: tcp-socket) -> result set-send-buffer-size: func(this: tcp-socket, value: u64) -> result<_, error-code> /// Create a `pollable` which will resolve once the socket is ready for I/O. /// /// Note: this function is here for WASI Preview2 only. /// It's planned to be removed when `future` is natively supported in Preview3. subscribe: func(this: tcp-socket) -> pollable /// Initiate a graceful shutdown. /// /// - receive: the socket is not expecting to receive any more data from the peer. All subsequent read /// operations on the `input-stream` associated with this socket will return an End Of Stream indication. /// Any data still in the receive queue at time of calling `shutdown` will be discarded. /// - send: the socket is not expecting to send any more data to the peer. All subsequent write /// operations on the `output-stream` associated with this socket will return an error. /// - both: same effect as receive & send combined. /// /// The shutdown function does not close (drop) the socket. /// /// # Typical errors /// - `not-connected`: The socket is not in the Connection state. (ENOTCONN) /// /// # References /// - /// - /// - /// - shutdown: func(this: tcp-socket, shutdown-type: shutdown-type) -> result<_, error-code> /// Dispose of the specified `tcp-socket`, after which it may no longer be used. /// /// Similar to the POSIX `close` function. /// /// Note: this function is scheduled to be removed when Resources are natively supported in Wit. drop-tcp-socket: func(this: tcp-socket) }