MOV (element) Move vector element to another vector element This instruction copies the vector element of the source SIMD&FP register to the specified vector element of the destination SIMD&FP register. This instruction can insert data into individual elements within a SIMD&FP register without clearing the remaining bits to zero. Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped. If PSTATE.DIT is 1: The execution time of this instruction is independent of: The values of the data supplied in any of its registers. The values of the NZCV flags. The response of this instruction to asynchronous exceptions does not vary based on: The values of the data supplied in any of its registers. The values of the NZCV flags. INS (element) 0 1 1 0 1 1 1 0 0 0 0 0 1 MOV <Vd>.<Ts>[<index1>], <Vn>.<Ts>[<index2>] INS <Vd>.<Ts>[<index1>], <Vn>.<Ts>[<index2>] Unconditionally <Vd> Is the name of the SIMD&FP destination register, encoded in the "Rd" field. <Ts> Is an element size specifier, imm5 <Ts> x0000 RESERVED xxxx1 B xxx10 H xx100 S x1000 D <index1> Is the destination element index imm5 <index1> x0000 RESERVED xxxx1 UInt(imm5<4:1>) xxx10 UInt(imm5<4:2>) xx100 UInt(imm5<4:3>) x1000 UInt(imm5<4>) <Vn> Is the name of the SIMD&FP source register, encoded in the "Rn" field. <index2> Is the source element index imm5 <index2> x0000 RESERVED xxxx1 UInt(imm4) xxx10 UInt(imm4<3:1>) xx100 UInt(imm4<3:2>) x1000 UInt(imm4<3>) Unspecified bits in "imm4" are ignored but should be set to zero by an assembler.