boardsource-blok

Crates.ioboardsource-blok
lib.rsboardsource-blok
version0.3.0
sourcesrc
created_at2023-07-26 22:53:37.232633
updated_at2024-04-07 11:08:03.7158
descriptionBoard Support Package for the rp2040 based Blok
homepagehttps://github.com/rp-rs/rp-hal-boards/tree/main/boards/boardsource-blok
repositoryhttps://github.com/rp-rs/rp-hal-boards.git
max_upload_size
id926906
size57,598
Jan Niehusmann (jannic)

documentation

README

boardsource-blok - Board Support for the Blok

You should include this crate if you are writing code that you want to run on a Blok - an RP2040 based controller, made by Boardsource, built for the keyboard community. This crate includes the rp2040-hal, but also configures each pin of the RP2040 chip according to how it is connected up on the Blok. More Information about the pin layout at Peg.

Using

To use this crate, your Cargo.toml file should contain:

boardsource-blok = "0.3.0"

In your program, you will need to call blok::Pins::new to create a new Pins structure. This will set up all the GPIOs for any on-board devices. See the examples folder for more details.

Examples

General Instructions

To compile an example, clone the rp-hal-boards repository and run:

rp-hal-boards/boards/boardsource-blok $ cargo build --release --example <name>

You will get an ELF file called ./target/thumbv6m-none-eabi/release/examples/<name>, where the target folder is located at the top of the rp-hal-boards repository checkout. Normally you would also need to specify --target=thumbv6m-none-eabi but when building examples from this git repository, that is set as the default.

If you want to convert the ELF file to a UF2 and automatically copy it to the USB drive exported by the RP2040 bootloader, simply boot your board into bootloader mode and run:

rp-hal-boards/boards/boardsource-blok $ cargo run --release --example <name>

If you get an error about not being able to find elf2uf2-rs, try:

$ cargo install elf2uf2-rs

then try repeating the cargo run command above.

From Scratch

To start a basic project from scratch, create a project using cargo new project-name. Within the project directory, run cargo add blok, cargo add cortex-m-rt, and cargo add panic-halt. The first command will add this HAL (Hardware Abstraction Layer), the second is required for the #[entry] macro, and panic-halt creates a simple panic function, which just halts.

You'll also need to copy the cargo config file from the repo. It specifies the target and optimizing flags to the linker. You'll also need to copy memory.x to your project root. This file tells the linker the flash and RAM layout, so it won't clobber the bootloader or write to an out of bounds memory address.

The simplest working example, which does nothing except loop forever, is:

#![no_std]
#![no_main]
use blok::entry;
use panic_halt as _;
#[entry]
fn see_doesnt_have_to_be_called_main() -> ! {
  loop {}
}

It can be placed in /src/main.rs.

You can use cargo run to compile and install it. Note: You won't see any activity since this program does nothing. You can use the examples provided to add more functionality.

blok_rainbow

Runs a rainbow-effect color wheel on the on-board neopixel.

blok_reset_to_usb_boot

Resets the Blok after 10 seconds to usb boot mode.

blok_usb_keyboard_input

Demonstrates emulating a USB Human Input Device (HID) Keyboard. The keyboard will type "HELLO" five times.

Contributing

Contributions are what make the open source community such an amazing place to be learn, inspire, and create. Any contributions you make are greatly appreciated.

The steps are:

  1. Fork the Project by clicking the 'Fork' button at the top of the page.
  2. Create your Feature Branch (git checkout -b feature/AmazingFeature)
  3. Make some changes to the code or documentation.
  4. Commit your Changes (git commit -m 'Add some AmazingFeature')
  5. Push to the Feature Branch (git push origin feature/AmazingFeature)
  6. Create a New Pull Request
  7. An admin will review the Pull Request and discuss any changes that may be required.
  8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

Code of Conduct

Contribution to this crate is organized under the terms of the Rust Code of Conduct, and the maintainer of this crate, the rp-rs team, promises to intervene to uphold that code of conduct.

License

The contents of this repository are dual-licensed under the MIT OR Apache 2.0 License. That means you can choose either the MIT license or the Apache-2.0 license when you re-use this code. See MIT or APACHE2.0 for more information on each specific license.

Any submissions to this project (e.g. as Pull Requests) must be made available under these terms.

Commit count: 876

cargo fmt