Crates.io | cs4272 |
lib.rs | cs4272 |
version | 0.1.0 |
source | src |
created_at | 2024-10-17 20:06:47.470425 |
updated_at | 2024-10-17 20:06:47.470425 |
description | Rust I2S driver for the CS4272 |
homepage | https://github.com/samuelleeuwenburg/cs4272 |
repository | https://github.com/samuelleeuwenburg/cs4272 |
max_upload_size | |
id | 1413573 |
size | 59,336 |
I2S implementation for the Cirrus Logic CS4272 IC built using the PIO.
The driver assumes the CS4272 is running in left-justified and slave mode.
This driver uses double buffering for both input and output: when one set of buffers is busy reading/writing to and from the hardware the other set is available to be read and written to.
The library requires you to handle the switching of the buffers using the DMA_IRQ_0
so it makes sense to put the driver into a Mutex<RefCell<Option<Cs4272>>
for concurrent access.
const BUFFER_SIZE: usize = 32;
static CS4272: Mutex<
RefCell<
Option<
Cs4272<
BUFFER_SIZE,
PIO0,
Channel<CH0>,
Channel<CH1>,
Pin<Gpio0, FunctionSioOutput, PullDown>,
Pin<Gpio1, FunctionPio0, PullDown>,
Pin<Gpio2, FunctionPio0, PullDown>,
Pin<Gpio3, FunctionPio0, PullDown>,
Pin<Gpio5, FunctionPio0, PullDown>,
>,
>,
>,
> = Mutex::new(RefCell::new(None));
And handle the interrupt:
#[interrupt]
fn DMA_IRQ_0() {
cortex_m::interrupt::free(|cs| {
if let Some(driver) = CS4272.borrow(cs).borrow_mut().as_mut() {
driver.handle_irq0();
}
});
}
Configure and start the driver:
let cs4272k = Cs4272Builder::new(
pins.gpio0.into_push_pull_output(),
pins.gpio1.into_function(),
pins.gpio2.into_function(),
pins.gpio3.into_function(),
pins.gpio4.into_function(),
pins.gpio5.into_function(),
pac.PIO0,
dma.ch0,
dma.ch1,
singleton!(: [u32; BUFFER_SIZE] = [0; BUFFER_SIZE]).unwrap(),
singleton!(: [u32; BUFFER_SIZE] = [0; BUFFER_SIZE]).unwrap(),
singleton!(: [u32; BUFFER_SIZE] = [0; BUFFER_SIZE]).unwrap(),
singleton!(: [u32; BUFFER_SIZE] = [0; BUFFER_SIZE]).unwrap(),
)
.start(&mut pac.RESETS);
Using the [Cs4272::poll] method you can check wether or not the current available buffer has already been written to. This makes it relatively easy to process the data whenever it makes sense for your application:
cortex_m::interrupt::free(|cs| {
if let Some(cs4272) = CS4272.borrow(cs).borrow_mut().as_mut() {
// Check if the buffers are ready for processing
if cs4272.poll() {
// Make a copy of the input buffer for manipulation
let mut buffer = cs4272.get_input_buffer().clone();
// Process input
for _sample in buffer.iter_mut() { /* ... */ }
// Copy the processed buffer to the output
cs4272.set_output_buffer(&input);
}
}
});
Just make sure to keep the processing light or clone the data out of the interrupt::free
callback so you won't miss a buffer.