Multi Layer Archive (MLA)

MLA is an archive file format with the following features:

• Support for compression (based on rust-brotli)
• Support for authenticated encryption with asymmetric keys (AES256-GCM with an ECIES schema over Curve25519, based on Rust-Crypto aes-ctr and DalekCryptography x25519-dalek)
• Effective, architecture agnostic and portable (written entirely in Rust)
• Small memory footprint during archive creation
• Streamable archive creation:
  • An archive can be built even over a data-diode
  • A file can be added through chunks of data, without initially knowing the final size
  • File chunks can be interleaved (one can add the beginning of a file, start a second one, and then continue adding the first file's parts)
• Archive files are seekable, even if compressed or encrypted. A file can be accessed in the middle of the archive without reading from the beginning
• If truncated, archives can be repaired. Files which were still in the archive, and the beginning of the ones for which the end is missing, will be recovered
• Arguably less prone to bugs, especially while parsing an untrusted archive (Rust safety)

Repository

This repository contains:

• mla: the Rust library implementing MLA reader and writer
• mlar: a Rust utility wrapping mla for common actions (create, list, extract, ...)
• curve25519-parser: a Rust library for parsing DER/PEM public and private Ed25519 keys and X25519 keys (as made by openssl)
• mla-fuzz-afl : a Rust utility to fuzz mla
• bindings : bindings for other languages
• .github: Continuous Integration needs

Quick command-line usage

Here are some commands to use mlar in order to work with archives in MLA format.

# Generate an X25519 key pair {key, key.pub} (OpenSSL could also be used)
mlar keygen key

# Create an archive with some files, using the public key
mlar create -p key.pub -o my_archive.mla /etc/os-release /etc/issue

# List the content of the archive, using the private key
mlar list -k key -i my_archive.mla

# Extract the content of the archive into a new directory
# In this example, this creates two files:
# extracted_content/etc/issue and extracted_content/etc/os-release
mlar extract -k key -i my_archive.mla -o extracted_content

# Display the content of a file in the archive
mlar cat -k key -i my_archive.mla /etc/os-release

# Convert the archive to a long-term one, removing encryption and using the best
# and slower compression level
mlar convert -k key -i my_archive.mla -o longterm.mla -l compress -q 11

# Create an archive with multiple recipient
mlar create -p archive.pub -p client1.pub -o my_archive.mla ...

mlar can be obtained:

• through Cargo: cargo install mlar

• using the latest release for supported operating systems

Quick API usage

• Create an archive, with compression and encryption:

use curve25519_parser::parse_openssl_25519_pubkey;
use mla::config::ArchiveWriterConfig;
use mla::ArchiveWriter;

const PUB_KEY: &[u8] = include_bytes!("samples/test_x25519_pub.pem");

fn main() {
    // Load the needed public key
    let public_key = parse_openssl_25519_pubkey(PUB_KEY).unwrap();

    // Create an MLA Archive - Output only needs the Write trait
    let mut buf = Vec::new();
    // Default is Compression + Encryption, to avoid mistakes
    let mut config = ArchiveWriterConfig::default();
    // The use of multiple public keys is supported
    config.add_public_keys(&vec![public_key]);
    // Create the Writer
    let mut mla = ArchiveWriter::from_config(&mut buf, config).unwrap();

    // Add a file
    mla.add_file("filename", 4, &[0, 1, 2, 3][..]).unwrap();

    // Complete the archive
    mla.finalize().unwrap();
}

• Add files part per part, in a "concurrent" fashion:

...
// A file is tracked by an id, and follows this API's call order:
// 1. id = start_file(filename);
// 2. append_file_content(id, content length, content (impl Read))
// 2-bis. repeat 2.
// 3. end_file(id)

// Start a file and add content
let id_file1 = mla.start_file("fname1").unwrap();
mla.append_file_content(id_file1, file1_part1.len() as u64, file1_part1.as_slice()).unwrap();
// Start a second file and add content
let id_file2 = mla.start_file("fname2").unwrap();
mla.append_file_content(id_file2, file2_part1.len() as u64, file2_part1.as_slice()).unwrap();
// Add a file as a whole
mla.add_file("fname3", file3.len() as u64, file3.as_slice()).unwrap();
// Add new content to the first file
mla.append_file_content(id_file1, file1_part2.len() as u64, file1_part2.as_slice()).unwrap();
// Mark still opened files as finished
mla.end_file(id_file1).unwrap();
mla.end_file(id_file2).unwrap();

• Read files from an archive

use curve25519_parser::parse_openssl_25519_privkey;
use mla::config::ArchiveReaderConfig;
use mla::ArchiveReader;
use std::io;

const PRIV_KEY: &[u8] = include_bytes!("samples/test_x25519_archive_v1.pem");
const DATA: &[u8] = include_bytes!("samples/archive_v1.mla");

fn main() {
    // Get the private key
    let private_key = parse_openssl_25519_privkey(PRIV_KEY).unwrap();

    // Specify the key for the Reader
    let mut config = ArchiveReaderConfig::new();
    config.add_private_keys(&[private_key]);

    // Read from buf, which needs Read + Seek
    let buf = io::Cursor::new(DATA);
    let mut mla_read = ArchiveReader::from_config(buf, config).unwrap();

    // Get a file
    let mut file = mla_read
        .get_file("simple".to_string())
        .unwrap() // An error can be raised (I/O, decryption, etc.)
        .unwrap(); // Option(file), as the file might not exist in the archive

    // Get back its filename, size, and data
    println!("{} ({} bytes)", file.filename, file.size);
    let mut output = Vec::new();
    std::io::copy(&mut file.data, &mut output).unwrap();

    // Get back the list of files in the archive:
    for fname in mla_read.list_files().unwrap() {
        println!("{}", fname);
    }
}

:warning: Filenames are Strings, which may contain path separator (/, \, .., etc.). Please consider this while using the API, to avoid path traversal issues.

Using MLA with others languages

Bindings are available for:

• C/CPP

Design

As the name spoils it, an MLA archive is made of several, independent, layers. The following section introduces the design ideas behind MLA. Please refer to FORMAT.md for a more formal description.

Layers

Each layer acts as a Unix PIPE, taking bytes in input and outputting in the next layer. A layer is made of:

• a Writer, implementing the Write trait. It is responsible for emitting bytes while creating a new archive
• a Reader, implementing both Read and Seek traits. It is responsible for reading bytes while reading an archive
• a FailSafeReader, implementing only the Read trait. It is responsible for reading bytes while repairing an archive

Layers are made with the repairable property in mind. Reading them must never need information from the footer, but a footer can be used to optimize the reading. For example, accessing a file inside the archive can be optimized using the footer to seek to the file beginning, but it is still possible to get information by reading the whole archive until the file is found.

Layers are optional, but their order is enforced. Users can choose to enable or disable them. Current order is the following:

1. File storage abstraction (not a layer)
2. Raw layer (mandatory)
3. Compression layer
4. Encryption layer
5. Position layer (mandatory)
6. Stored bytes

Overview

+----------------+-------------------------------------------------------------------------------------------------------------+
| Archive Header |                                                                                                             | => Final container (File / Buffer / etc.)
+------------------------------------------------------------------------------------------------------------------------------+
                 +-------------------------------------------------------------------------------------------------------------+
                 |                                                                                                             | => Raw layer
                 +-------------------------------------------------------------------------------------------------------------+
                 +-----------+---------+------+---------+------+---------------------------------------------------------------+
                 | E. header | Block 1 | TAG1 | Block 2 | TAG2 | Block 3 | TAG3 | ...                                          | => Encryption layer
                 +-----------+---------+------+---------+------+---------------------------------------------------------------+
                             |         |      |         |      |         |      |                                              |
                             +-------+--      --+-------       -----------      ----+---------+------+---------+ +-------------+
                             | Blk 1 |          | Blk 2                             | Block 3 | ...  | Block n | |    Footer   | => Compression Layer
                             +-------+--      --+-------       -----------      ----+---------+------+---------+ +-------------+
                            /         \                                                             /           \
                           /           \                                                           /             \
                          /             \                                                         /               \
                         +-----------------------------------------------------------------------------------------+
                         |                                                                                         |             => Position layer
                         +-----------------------------------------------------------------------------------------+
                         +-------------+-------------+-------------+-------------+-----------+-------+-------------+
                         | File1 start | File1 data1 | File2 start | File1 data2 | File1 end |  ...  | Files index |             => Files information and content
                         +-------------+-------------+-------------+-------------+-----------+-------+-------------+

Layers description

Raw Layer

Implemented in RawLayer* (i.e. RawLayerWriter, RawLayerReader and RawLayerFailSafeReader).

This is the simplest layer. It is required to provide an API between layers and final output worlds. It is also used to keep the position of data's start.

Position Layer

Implemented in PositionLayer*.

Similar to the RawLayer, this is a very simple, utility, layer. It keeps track of how many bytes have been written to the sub-layers.

For instance, it is required by the file storage layer to keep track of the position in the flow of files, for indexing purpose.

Encryption Layer

Implemented in EncryptionLayer*.

This layer encrypts data using the symmetric authenticated encryption with associated data (AEAD) algorithm AES-GCM 256, and encrypts the symmetric key using an ECIES schema based on Curve25519.

The ECIES schema is extended to support multiple public keys: a public key is generated and then used to perform n Diffie-Hellman exchanges with the n users public keys. The generated public key is also recorded in the header (to let the user replay the DH exchange). Once derived according to ECIES, we get n keys. These keys are then used to encrypt a common key k, and the resulting n ciphertexts are stored in the layer header. This key k will later be used for the symmetric encryption of the archive.

In addition to the key, a nonce (8 bytes) is also generated per archive. A fixed associated data is used.

The generation uses OsRng from crate rand, that uses getrandom() from crate getrandom. getrandom provides implementations for many systems, listed here. On Linux it uses the getrandom() syscall and falls back on /dev/urandom. On Windows it uses the RtlGenRandom API (available since Windows XP/Windows Server 2003).

In order to be "better safe than sorry", a ChaChaRng is seeded from the bytes generated by OsRng in order to build a CSPRNG(Cryptographically Secure PseudoRandom Number Generator). This ChaChaRng provides the actual bytes used in keys and nonces generations.

The layer data is then made of several encrypted blocks, each with a constant size except for the last one. Each block is encrypted with an IV including the base nonce and a counter. This construction is close to the STREAM one, except for the last_block bit. The choice has been made not to use it, because:

• At the time of writing, the archive writer does not know that the current block is the last one. Therefore, it cannot use a specific IV. To circumvent it, a dummy footer block has to be added at the end, leading to additional complexity for last block detection
• In STREAM, the last_block bit is used to prevent undetected truncation. In MLA, it is already the role of the EndOfArchiveData tag at the file layer level

Thus, to seek-and-read at a given position, the layer decrypts the block containing this position, and verifies the tag before returning the decrypted data.

The authors decided to use elliptic curve over RSA, because:

• No ready-for-production Rust-based libraries have been found at the date of writing
• A security-audited Rust library already exists for Curve25519
• Curve25519 is widely used and respects several criteria
• Common arguments, such as the ones of Trail of bits

AES-GCM is used because it is one of the most commonly used AEAD algorithms and using one avoids a whole class of attacks. In addition, it lets us rely on hardware acceleration (like AES-NI) to keep reasonable performance.

External cryptographic libraries have been reviewed:

• RustCrypto AES-GCM, reviewed by NCC Group

• Dalek cryptography library, reviewed by Quarkslab

Compression Layer

Implemented in CompressionLayer*.

This layer is based on the Brotli compression algorithm (RFC 7932). Each 4MB of cleartext data is stored in a separately compressed chunk.

This algorithm, used with a window of size 1, is able to read each chunk and stop when 4MB of cleartext has been obtained. It is then reset, and starts decompressing the next chunk.

To speed up the decompression, and to make the layer seekable, a footer is used. It saves the compressed size. Knowing the decompressed size, a seek at a cleartext position can be performed by seeking to the beginning of the correct compressed block, then decompressing the first bytes until the desired position is reached.

The footer is also used to allow for a wider window, enabling faster decompression. Finally, it also records the size of the last block, to compute the frontier between compressed data and the footer.

The 4MB size is a trade-off between a better compression (higher value) and faster seeking (smaller value). It has been chosen based on benchmarking of representative data. Better compression can also be achieved by setting the compression quality parameter to a higher value (leading to a slower process).

File storage

Files are saved as series of archive-file blocks. A first special type of block indicates the start of a file, along with its filename and a file ID. A second special type of block indicates the end of the current file.

Blocks contain file data, prepended with the current block size and the corresponding file ID. Even if the format handles streaming files, the size of a file chunk must be known before writing it. The file ID enables blocks from different files to be interleaved.

The file-ending block marks the end of data for a given file, and includes its full content SHA256. Thus, the integrity of files can be checked, even on repair operations.

The layer footer contains for each file its size, its ending block offset and an index of its block locations. Block location index enables direct access. The ending block offset enables fast hash retrieval and the file size eases the conversion to formats needing the size of the file before the data, such as Tar.

If this footer is unavailable, the archive is read from the beginning to recover file information.

API Guidelines

The archive format provides, for each file:

• a filename, which is an unicode String
• data, which are a stream of bytes

A few metadata are also computed, such as:

• the file size
• the SHA256 hash of the content

No additional metadata (permissions, ownership, etc.) are present, and would probably not be added unless very strong arguments are given. The goal is to keep the file format simple enough, and to leave the complexity to the code using it. Things such as permissions, ownership, etc. are hard to guarantee over several OSes and filesystems; and lead to higher complexity, for example in tar. For the same reasons, / or \ do not have any significance in filename; it is up to the user to choose how to handle them (are there namespaces? directories in Windows style? etc.).

If one still wants to have associated metadata for its own use case, the recommended way is to embed an additional file in the archive containing the needed metadata.

Additionally, the file format is expected to change slightly in the future, to keep an easier backward compatibility, or, at least, version conversion, and simple support.

The API provided by the library is then very simple:

• Add a file
• Start / Add file chunk / End
• List files in the archive (unordered)
• Get a file
• Get a file hash

As the need for a less general API might appear, helpers are available in mla::helpers, such as:

• StreamWriter: Provides a Write interface on a ArchiveWriter file (could be used when even file chunk sizes are not known, likely with io::copy)

• linear_extract: Extract an Archive linearly. Faster way to extract a whole archive, by reducing the amount of costly seek operations

Is a new format really required?

As existing archive formats are numerous, probably not.

But to the best of the authors' knowledge, none of them support the aforementioned features (but, of course, are better suitable for others purposes).

For instance (from the understanding of the author):

• tar format needs to know the size of files before adding them, and is not seekable
• zip format could lose information about files if the footer is removed
• 7zip format requires to rebuild the entire archive while adding files to it (not streamable). It is also quite complex, and so harder to audit / trust when unpacking unknown archive
• journald format is not streamable. Also, one writter / multiple reader is not needed here, thus releasing some constraints journald format have
• any archive + age: age could be used jointly with an archive format to provide encryption, but would likely lack integration with the inner archive format
• Backup formats are generally written to avoid things such as duplication, hence their need to keep bigger structures in memory, or their not being streamable

Tweaking these formats would likely have resulted in similar properties. The choice has been made to keep a better control over what the format is capable of, and to (try to) KISS.

Testing

The repository contains:

• unit tests (for mla and curve25519-parser), testing separately expected behaviors
• integration tests (for mlar), testing common scenarios, such as create->list->to-tar, or create->truncate->repair
• benchmarking scenarios (for mla)
• AFL scenario (for mla)
• A committed archive in format v1, to ensure backward readability over time

Performance

One can evaluate the performance through embedded benchmark, based on Criterion.

Several scenarios are already embedded, such as:

• File addition, with different size and layer configurations
• File addition, varying the compression quality
• File reading, with different size and layer configurations
• Random file read, with different size and layer configurations
• Linear archive extraction, with different size and layer configurations

On an "Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz":

$ cd mla/
$ cargo bench
...
multiple_layers_multiple_block_size/Layers ENCRYPT | COMPRESS | DEFAULT/1048576                                                                           
                        time:   [28.091 ms 28.259 ms 28.434 ms]
                        thrpt:  [35.170 MiB/s 35.388 MiB/s 35.598 MiB/s]
...
chunk_size_decompress_mutilfiles_random/Layers ENCRYPT | COMPRESS | DEFAULT/4194304                                                                          
                        time:   [126.46 ms 129.54 ms 133.42 ms]
                        thrpt:  [29.980 MiB/s 30.878 MiB/s 31.630 MiB/s]
...
linear_vs_normal_extract/LINEAR / Layers DEBUG | EMPTY/2097152                        
                        time:   [145.19 us 150.13 us 153.69 us]
                        thrpt:  [12.708 GiB/s 13.010 GiB/s 13.453 GiB/s]
...

Criterion.rs documentation explains how to get back HTML reports, compare results, etc.

The AES-NI extension is enabled in the compilation toolchain for the supported architectures, leading to massive performance gain for the encryption layer, especially in reading operations. Because the crate aesni statically enables it, it might lead to errors if the user's architecture does not support it. It could be disabled at the compilation time, or by commenting the associated section in .cargo/config.

Fuzzing

A fuzzing scenario made with afl.rs is available in mla-fuzz-afl. The scenario is capable of:

• Creating archives with interleaved files, and different layers enabled
• Reading them to check their content
• Repairing the archive without truncation, and verifying it
• Altering the archive raw data, and ensuring reading it does not panic (but only fail)
• Repairing the altered archive, and ensuring the recovery doesn't fail (only reports detected errors)

To launch it:

1. produce initial samples by uncommenting produce_samples() in mla-fuzz-afl/src/main.rs

cd mla-fuzz-afl
# ... uncomment `produces_samples()` ...
mkdir in
mkdir out
cargo run

2. build and launch AFL

cargo afl build
cargo afl run -i in -o out ../target/debug/mla-fuzz-afl

If you have found crashes, try to replay them with either:

• Peruvian rabbit mode of AFL: cargo afl run -i - -o out -C ../target/debug/mla-fuzz-afl
• Direct replay: ../target/debug/mla-fuzz-afl < out/crashes/crash_id
• Debugging: uncomment the "Replay sample" part of mla-fuzz-afl/src/main.rs, and add dbg!() when it's needed

:warning: The stability is quite low, likely due to the process used for the scenario (deserialization from the data provided by AFL) and variability of inner algorithms, such as brotli. Crashes, if any, might not be reproducible or due to the mla-fuzz-afl inner working, which is a bit complex (and therefore likely buggy). One can comment unrelevant parts in mla-fuzz-afl/src/main.rs to ensure a better experience.

FAQ

Is MLAArchiveWriter Send?

By default, MLAArchiveWriter is not Send. If the inner writable type is also Send, one can enable the feature send for mla in Cargo.toml, such as:

[dependencies]
mla = { version = "...", default-features = false, features = ["send"]}

How to deterministically generate a key-pair?

The option --seed of mlar keygen can be used to deterministically generate a key-pair. For instance, it can be used for reproductive testing or archiving a key in a safe.

:warning: It is not recommended to use a seed unless one knows why she is doing it. The security of the resulting private-key is dependent of the security of the seed. In particular:

• if an attacker known the seed, he knowns the private-key
• the entropy of the resulting private-key is at most the one of the seed

The algorithm used for the generation is as follow:

1. given a seed, encode it as an UTF8 sequence of bytes bytes
2. prng_seed = SHA512(bytes)[0..32]
3. secret = ChaCha-20rounds(prng_seed)
4. secret, after being clamped as specified by the Curve-25519 reference, is used as the private key

How to setup a "hierarchical key infrastructure"?

mlar provides a subcommand keyderive to deterministically derive sub-key from a given key along a derivation path (a bit like BIP-32, except children public keys can't be derived from the parent one).

For instance, if one wants to derive the following scheme:

root_key
    ├──["App X"]── key_app_x
    │   └──["v1.2.3"]── key_app_x_v1.2.3
    └──["App Y"]── key_app_y

One can use the following commands:

# Create the root key (--seed can be used if this key must be created deterministically, see above)
mlar keygen root_key
# Create App keys
mlar keyderive root_key key_app_x --path "App X"
mlar keyderive root_key key_app_y --path "App Y"
# Create the v1.2.3 key of App X
mlar keyderive key_app_x key_app_x_v1.2.3 --path "v1.2.3"

At this point, let's consider an outage happened and keys have been lost.

One can recover all the keys from the root_key private key. For instance, to recover the key_app_v1.2.3:

mlar keyderive root_key recovered_key --path "App X" --path "v1.2.3"

As such, if the App X owner only knows key_app_x, he can recover all of its subkeys, including key_app_v1.2.3 but excluding key_app_y.

:warning: This scheme does not provide any revocation mechanism. If a parent key is compromised, all of the key in its sub-tree must be considered compromised (ie. all past and futures key that can be obtained from it). The opposite is not true: a parent key remains safe if any of its children key is compromised.

The algorithm used for the generation is as follow:

1. Given a private key, extract it's secret as a 32-bytes value (the clamped private key of Curve 25519)

2. For each path encoded as UTF8:

   1. Derive a seed from a HKDF-SHA512 function (RFC5869) with: HKDF-SHA512(salt="PATH DERIVATION" ASCII-encoded, ikm=secret extracted from the parent key, info=Derivation path)
   2. Use the first 32-bytes as a seed for a ChaCha-20 rounds PRNG
   3. The first 32-bytes output of ChaCha, after being clamped as specified by the Curve-25519 reference, is used as the new private key

3. Use the last computed private key as the resulting key