divans

Crates.iodivans
lib.rsdivans
version0.0.1
sourcesrc
created_at2018-06-19 17:30:50.132933
updated_at2018-06-19 17:30:50.132933
descriptionDivANS is a new way of structuring compression programs to make them more open to innovation in the wider community, by separating compression into multiple stages that can each be improved independently
homepage
repository
max_upload_size
id70829
size6,535,844
Daniel (danielrh)

documentation

https://blogs.dropbox.com/tech/2018/06/building-better-compression-together-with-divans/

README

% divANS Module

Overview

The divANS crate is meant to be used for generic data compression. The algorithm has been tuned to significantly favor gains in compression ratio over performance, operating at line speeds of 150 Mbit/s.

The name originates from "divided-ANS" since the intermediate representation is divided from the ANS codec

More information at https://blogs.dropbox.com/tech/2018/06/building-better-compression-together-with-divans/

Divans should primarily be considered for cold storage and compression research. The compression algorithm is highly modular and new algorithms only need to be written a single time since generic trait specialization constructs optimized variants of the codec for both compression and decompression at compile time.

Rust Usage

Decompression

extern crate divans;
fn main() {
    use std::io;
    let stdin = &mut io::stdin();
    {
        use std::io::{Read, Write};
        let mut reader = divans::DivansDecompressorReader::new(
            stdin,
            4096, // buffer size
        );
        let mut buf = [0u8; 4096];
        loop {
            match reader.read(&mut buf[..]) {
                Err(e) => {
                    if let io::ErrorKind::Interrupted = e.kind() {
                        continue;
                    }
                    panic!(e);
                }
                Ok(size) => {
                    if size == 0 {
                        break;
                    }
                    match io::stdout().write_all(&buf[..size]) {
                        Err(e) => panic!(e),
                        Ok(_) => {},
                    }
                }
            }
        }
    }   
}

Compression

extern crate divans;
fn main() {
    use std::io;
    let stdout = &mut io::stdout();
    {
        use std::io::{Read, Write};
        let mut writer = divans::DivansBrotliHybridCompressorWriter::new(
            stdout,
            divans::DivansCompressorOptions{
                literal_adaptation:None, // should we override how fast the cdfs converge for literals?
                window_size:Some(22), // log 2 of the window size
                lgblock:None, // should we override how often metablocks are created in brotli
                quality:Some(11), // the quality of brotli commands
                dynamic_context_mixing:Some(2), // if we want to mix together the stride prediction and the context map
                use_brotli:divans::BrotliCompressionSetting::default(), // ignored
                use_context_map:true, // whether we should use the brotli context map in addition to the last 8 bits of each byte as a prior
                force_stride_value: divans::StrideSelection::UseBrotliRec, // if we should use brotli to decide on the stride
            },
            4096, // internal buffer size
        );
        let mut buf = [0u8; 4096];
        loop {
            match io::stdin().read(&mut buf[..]) {
                Err(e) => {
                    if let io::ErrorKind::Interrupted = e.kind() {
                        continue;
                    }
                    panic!(e);
                }
                Ok(size) => {
                    if size == 0 {
                        match writer.flush() {
                            Err(e) => {
                                if let io::ErrorKind::Interrupted = e.kind() {
                                    continue;
                                }
                                panic!(e)
                            }
                            Ok(_) => break,
                        }
                    }
                    match writer.write_all(&buf[..size]) {
                        Err(e) => panic!(e),
                        Ok(_) => {},
                    }
                }
            }
        }
    }
}

C usage

The C api is a standard compression API like the one that zlib provides. Despite being rust code, no allocations are made unless the CAllocator struct is passed in with the custom_malloc field set to NULL. This means that any user of the divans library may provide their own allocation system and all allocations will go through that allocation system. The pointers returned by custom_malloc must be 32-byte aligned.

Compression

#include "divans/ffi.h"
// compress to stdout
DivansResult compress(const unsigned char *data, size_t len) {
    unsigned char buf[4096];
    struct CAllocator alloc = {custom_malloc, custom_free, custom_alloc_opaque}; // set all 3 to NULL to use rust allocators
    struct DivansCompressorState *state = divans_new_compressor_with_custom_alloc(alloc);
    divans_set_option(state, DIVANS_OPTION_USE_CONTEXT_MAP, 1);
    divans_set_option(state, DIVANS_OPTION_DYNAMIC_CONTEXT_MIXING, 2);
    divans_set_option(state, DIVANS_OPTION_QUALITY, 11);
    while (len) {
        size_t read_offset = 0;
        size_t buf_offset = 0;
        DivansResult res = divans_encode(state,
                                         data, len, &read_offset,
                                         buf, sizeof(buf), &buf_offset);
        if (res == DIVANS_FAILURE) {
            divans_free_compressor(state);
            return res;
        }
        data += read_offset;
        len -= read_offset;
        fwrite(buf, buf_offset, 1, stdout);
    }
    DivansResult res;
    do {
        size_t buf_offset = 0;
        res = divans_encode_flush(state,
                                  buf, sizeof(buf), &buf_offset);
        if (res == DIVANS_FAILURE) {
            divans_free_compressor(state);
            return res;
        }
        fwrite(buf, buf_offset, 1, stdout);
    } while(res != DIVANS_SUCCESS);
    divans_free_compressor(state);
    return DIVANS_SUCCESS;
}

Decompression

#include "divans/ffi.h"
//decompress to stdout
DivansResult decompress(const unsigned char *data, size_t len) {
    unsigned char buf[4096];
    struct CAllocator alloc = {custom_malloc, custom_free, custom_alloc_opaque}; // set all 3 to NULL for using rust allocators
    struct DivansDecompressorState *state = divans_new_decompressor_with_custom_alloc(alloc);
    DivansResult res;
    do {
        size_t read_offset = 0;
        size_t buf_offset = 0;
        res = divans_decode(state,
                            data, len, &read_offset,
                            buf, sizeof(buf), &buf_offset);
        if (res == DIVANS_FAILURE || (res == DIVANS_NEEDS_MORE_INPUT && len == 0)) {
            divans_free_decompressor(state);
            return res;
        }
        data += read_offset;
        len -= read_offset;
        fwrite(buf, buf_offset, 1, stdout);
    } while (res != DIVANS_SUCCESS);
    divans_free_decompressor(state);
    return DIVANS_SUCCESS;
}

Structure of the divANS codebase

Top Level Modules

Module Purpose
probability Optimized implementations of 16-wide 4-bit CDF's that support online training and renormalization
codec/interface CrossCommandState tracks data to be kept between brotli commands. Examples include CDF's, the previous few bytes, the ring buffer for copies, etc
codec/dict Encode/decode parts of the file that may arise from the included brotli dictionary
codec/copy Encode/decode parts of the file that have already been seen before and are still in the ring buffer
codec/block_type Encode/decode markers in the file which divans can use as a prior for literals, distances or even command type
codec/context_map Encode/decode the brotli context_map which remaps the previous 6 bits and literal_block_type to a prior between 0 and 255
codec/literal Encode/decode new raw data that appears in the file. This can use a number of strategies or combinations of strategies to encode each nibble
codec/priors Structs defining the size of the tables that contain dynamically-trained CDF holding statistics about past-data.
codec/weights struct that blend between multiple CDFs based on prior efficacy
codec/specializations Optimization system to generate separate codepaths for currently-running nibble-decode or encode path, based on which priors were selected
codec Encode/decode the overall commands themselves and track the state of the compression of the overall file and if it is complete
divans_decompressor Implementation of Decompressor trait that parses divans headers and translates the ANS stream into commands and into raw data
brotli_ir_gen Implementation of Compressor trait that calls into the brotli codec and extracts the command array per metablock to be encoded
divans_compressor Alternate implementation of Compressor trait that calls into raw_to_cmd instead of brotli to get the command array per metablock
divans_to_raw DecoderSpecialization for the codec to assume default input commands and incrementally populate them
cmd_to_divans EncoderSpecialization for the codec to take input commands and produce divans
raw_to_cmd Future: a substitute for the Brotli compressor to generate commands
cmd_to_raw Interpret a list of Brotli commands and produce the uncompressed file
arithmetic_coder Define EntropyEncoder and EntropyDecoder arithmetic coder traits
ans Fast implementation of EntropyEncoder and EntropyDecoder interfaces
billing Plugin to add attribution to an ArithmeticEncoderOrDecoder by providing the same interface and wrapping the en/decoder
alloc_util Allocator that reuses a single slice of memory over many allocations
slice_util A mechanism to borrow and reference an existing slice that can be frozen, unborrowing the slice, when divans returns to the caller to request more input or output space
resizable_buffer Simple resizing byte buffer that can hold the raw input and output streams being processed
reader Read implementation for both encoding and decoding of divans
writer Write implementation for both encoding and decoding of divans

Overall flow

To Encode a file,

  • a writer::DivansBrotliHybridCompressorWriter instantiates a brotli_ir_gen::BrotliDivansHybridCompressor
  • The compressor has both a brotli::BrotliEncoderStateStruct from the brotli crate as well as a codec::DivansCodec<ANSEncoder, EncodeSpecialization>.
  • Using brotli_ir_gen::BrotliDivansHybridCompressor::encode, the compressor feeds input data into the brotli::BrotliEncoderStateStruct
    • by calling brotli::BrotliEncoderCompressStream
  • brotli::BrotliEncoderCompressStream can trigger a callback into brotli_ir_gen::BrotliDivansHybridCompressor::divans_encode_commands
    • The callback will consist of a slice of brotli::interface::Command items
    • These items are fed into the codec::DivansCodec<ANSEncoder, EncodeSpecialization>::encode_or_decode, which encodes them into divans format.
      • codec::DivansCodec<ANSEncoder, cmd_to_divans::EncoderSpecialization>::encode_or_decode accomplishes this by using the EncoderSpecialization to pull input commands as the source of truth
      • unfortunately brotli can pass as much data as it wishes to the caller, up to the maximum metablock size of 16 megs.
        • this means the caller has to buffer this data in a resizable_buffer::ResizableBuffer
  • When all the callbacks have completed, brotli_ir_gen::BrotliDivansHybridCompressor::encode_stream does its best to flush the raw buffer
  • Eventually when the user calls brotli_ir_gen::BrotliDivansHybridCompressor::flush a similar procedure is followed but with finish flags set

To Decode a file,

  • a reader::DivansDecompressorReader instantiates a divans_decompressor::DivansDecompressor
  • The decompressor is an enum that switches from HeaderParser mode into Decode mode after the 16 byte raw header has been parsed
  • divans_decompressor::DivansDecompressor::Decode has a codec::DivansCodec<ANSDecoder, DecoderSpecialization> within.
  • Using brotli_ir_gen::DivansDeompressor::decode, the decompressor feeds input data directly into codec::DivansCodec<ANSDecoder, DecoderSpecialization>
    • The codec.encode_or_decode is designed to receive commands as input when encoding, so the divans_to_raw::DecoderSpecialization simply makes placeholder commands for each type of command so that the same codepath can encode and decode commands
  • when a final state is reached, a checksum is written and success is returned

The codec state machine

codec::DivansCodec has three members, cross_command_state, which tracks the probability models, the state, to track which kind of command is being decoded, and codec_traits, used as a repository of compiler constant values that happen to be set that way during this decode or encode phase based on the header and command data.

The state value is an enumerant that can either carry command-specific information or can mark that the ring buffer must be populated, etc.

Overview of the available codec states

  • Begin: This state means that the decoder is not in the middle of coding a particular command, so the next step will be to decode what the next command is

  • Literal(literal::LiteralState: the coder is in the process of coding raw literals to be injected into the file

  • Dict(dict::DictState): the coder is in the process of coding a word that appears in the brotli dictionary

  • Copy(copy::CopyState): the coder is in the process of coding a reference to pull data from the ring buffer

  • BlockSwitchLiteral(block_type::LiteralBlockTypeState): The coder was instructed to serialize an arbitrary value that will affect how the predictor models future literals

  • BlockSwitchCommand(block_type::BlockTypeState): The coder was instructed to serialize an arbitrary value that will affect how the predictor models nothing (TODO)

  • BlockSwitchDistance(block_type::BlockTypeState): The coder was instructed to serialize an arbitrary value that will affect how the predictor models distances to copy from and dictionary values.

  • PredictionMode(context_map::PredictionModeState): The coder was instructed to serialize out a context map that remaps the BlockSwitchLiteral value plus the last 6 bits into a value in [0, 255] that is used as an index into the array of CDFs to be trained

  • PopulateRingBuffer(Command<AllocatedMemoryPrefix<u8, AllocU8>>) When Literal, Dict, or Copy states reach their termination state, those states are moved into the PopulateRingBuffer state.

    • PopulateRingBuffer uses the cmd_to_raw::DivansRecoderState stored in DivanCodec::CrossCommandState to populate the ring buffer
      • If DecoderSpecialization is selected, cmd_to_raw::DivansRecoderState copies the data to the output bytes, returning and requesting NeedBytes until all bytes have been serialized
      • Otherwise the EncoderSpecialization avoids serializing those bytes.
    • After all necessary bytes were serialized and the ring buffer populated, then the last_8_literals are saved to be used as future priors
  • WriteChecksum(usize) This state happens if an end command (0xf) is encountered during a decode or a code::DivansCodec::flush happens on encode

    • Currently checksum support is not active, but 8 bytes are simply serialized
  • DivansSuccess This state is reached when WriteChecksum is complete on the decoder or when the final command is reached on the encoder

  • EncodedShutdownNode | ShutdownCoder | CoderBufferDrain appear only in teh encoder during flush/close after the EOF node type as flushed

Acknowledgements

Special thanks to Jaroslaw (Jarek) Duda and Fabian Giesen for genius work and their detailed and thoughtful presentation of the ANS algorithm.

Commit count: 0

cargo fmt