ENS160-AQ  

A Rust crate for ScioSense ENS160 air quality sensor

https://github.com/marvinrobot42/ens160-aq.git

A benefit of using the ENS160 is the combined air quality index is calculated within the device, no external proprietary calculation programme is required.

Features

• updated to use embedded-hal version 1.0.x

• includes async support as a feature(s)

• designed for embedded use (ESP32-C3, -C6 and -S3) and Raspberry Pi

• configurable interrupt pin

• supports both 0x52 (default) and 0x53 (secondary) I2C device addresses

• set temperature and humidity for ENS160 compensation calulation

• reads air quality index, eCO2, TVOC, ethanol concentration and raw hot plate resistance (in ohms)

• an easy to use Measurements struct

• an easy to use initialize function

• no_std embedded compatible

• (SPI not supported, yet)

Notes

This is my first device driver project. I was inspired by Alexander Hübener's excellent ENS160 crate.

STM32 : The stm32fxx-hal crates are still embedded-hal version 0.2 based. In order to use this ens160-aq crate as a dependency for a STM32 project use version 0.1.4. For example [dependencies.ens160-aq] version = "0.1.4" Newer versions of ens160-aq are embedded-hal 1.0+ based and not compatible, you will get i2c and Delay::delay trait bounds build errors.

Check your hardware specific hal dependencies in crate.io. Version 1.0 is the latest. For example the ESP32-C3 and -C6 hal is esp-idf-hal version "0.43.0", it shows that it depends on embedded-hal version ^1. Raspberry Pi is linux-embedded-hal and version "0.4.0" depends on embedded-hal ^1 .

Recent version history

• 0.2.9 added async support

• 0.2.8 updated README.md

• 0.2.7 added Raspberry Pi example

• 0.2.6 fixed README.MD

• 0.2.5 added more documentation comments

• 0.2.2 fixed small bug in InterruptPinConfig, added build() method which just returns the .0 property as u8. Updated the examples/airquality.rs file

Usage

Add the dependency to Cargo.toml.

[dependencies.ens160-aq]
version = "0.2"

or for async

[dependencies.ens160-aq]
version = "0.2", features = ["async"]

Create an Ens160 struct from an I²C interface and a delay function. Configure interrupt pin properties if required.
Initialize ENS160. set_temp_rh_comp() can be called anytime for temperature and humidity compensation. Read the ENS160 status and check if new data or group data (if needed) is ready then get_measurements(). Or you can get ECO2 or TVOC or air quality index separately. Note that set_operation_mode(OperationMode::Reset) is available but it will put the ENS160 back to factory defaults including the 24 hour "burn-in" mode. It does not need to be called for any other reason.

Simple Example

A more complete example is in the repository examples path.

For async see async-embassy folder in examples folder of repository.

use ens160_aq::data::{InterruptPinConfig, Measurements};
use ens160_aq::Ens160;
...


fn main() -> Result<()> {

  ...

  let peripherals = Peripherals::take().unwrap();
  let pins = peripherals.pins;
  let sda = pins.gpio0;
  let scl = pins.gpio1;
  let i2c = peripherals.i2c0;
  let config = I2cConfig::new().baudrate(100.kHz().into());
  let i2c_dev = I2cDriver::new(i2c, sda, scl, &config)?;

  let mut ens160 = Ens160::new(i2c_dev, Ets {});  // Ets is ESP32 IDF delay function

  ens160.initialize().unwrap();


  loop {
    if let Ok(status) = ens160.get_status() {
      if status.new_data_ready() {  // read all measurements
        let measuremnts: Measurements = ens160.get_measurements().unwrap();
        info!("measurements are : {:#?}\n\n", measuremnts);
      }    
      else {
        info!("no new data ready");
      }  
    }

    FreeRtos::delay_ms(30000);
  }

}
    

License

You are free to copy, modify, and distribute this application with attribution under the terms of either

• Apache License, Version 2.0 (LICENSE-Apache-2.0 or https://opensource.org/licenses/Apache-2.0)
• MIT license (LICENSE-MIT or https://opensource.org/licenses/MIT)

at your option.

This project is not affiliated with nor endorsed in any way by ScioSense.