tokio-zookeeper

This crate provides a client for interacting with Apache ZooKeeper, a highly reliable distributed service for maintaining configuration information, naming, providing distributed synchronization, and providing group services.

About ZooKeeper

The ZooKeeper Overview provides a thorough introduction to ZooKeeper, but we'll repeat the most important points here. At its heart, ZooKeeper is a hierarchical key-value store (that is, keys can have "sub-keys"), which additional mechanisms that guarantee consistent operation across client and server failures. Keys in ZooKeeper look like paths (e.g., /key/subkey), and every item along a path is called a "Znode". Each Znode (including those with children) can also have associated data, which can be queried and updated like in other key-value stores. Along with its data and children, each Znode stores meta-information such as access-control lists, modification timestamps, and a version number that allows clients to avoid stepping on each other's toes when accessing values (more on that later).

Operations

ZooKeeper's API consists of the same basic operations you would expect to find in a file-system: create for creating new Znodes, delete for removing them, exists for checking if a node exists, get_data and set_data for getting and setting a node's associated data respectively, and get_children for retrieving the children of a given node (i.e., its subkeys). For all of these operations, ZooKeeper gives strong guarantees about what happens when there are multiple clients interacting with the system, or even what happens in response to system and network failures.

Ephemeral nodes

When you create a Znode, you also specify a [CreateMode]. Nodes that are created with [CreateMode::Persistent] are the nodes we have discussed thus far. They remain in the server until you delete them. Nodes that are created with [CreateMode::Ephemeral] on the other hand are special. These ephemeral nodes are automatically deleted by the server when the client that created them disconnects. This can be handy for implementing lease-like mechanisms, and for detecting faults. Since they are automatically deleted, and nodes with children cannot be deleted directly, ephemeral nodes are not allowed to have children.

Watches

In addition to the methods above, [ZooKeeper::exists], [ZooKeeper::get_data], and [ZooKeeper::get_children] also support setting "watches" on a node. A watch is one-time trigger that causes a [WatchedEvent] to be sent to the client that set the watch when the state for which the watch was set changes. For example, for a watched get_data, a one-time notification will be sent the first time the data of the target node changes following when the response to the original get_data call was processed. You should see the "Watches" entry in the Programmer's Guide for details.

Getting started

To get ZooKeeper up and running, follow the official Getting Started Guide. In most Linux environments, the procedure for getting a basic setup working is usually just to install the zookeeper package and then run systemctl start zookeeper. ZooKeeper will then be running at 127.0.0.1:2181.

This implementation

This library is analogous to the asynchronous API offered by the official Java implementation, and for most operations the Java documentation should apply to the Rust implementation. If this is not the case, it is considered a bug, and we'd love a bug report with as much relevant information as you can offer.

Note that since this implementation is asynchronous, users of the client must take care to not re-order operations in their own code. There is some discussion of this in the official documentation of the Java bindings.

For more information on ZooKeeper, see the ZooKeeper Programmer's Guide and the Confluence ZooKeeper wiki. There is also a basic tutorial (that uses the Java client) here.

Interaction with Tokio

The futures in this crate expect to be running under a tokio::Runtime. In the common case, you cannot resolve them solely using .wait(), but should instead use tokio::run or explicitly create a tokio::Runtime and then use Runtime::block_on.

A somewhat silly example

extern crate tokio;
#[macro_use]
extern crate failure;
extern crate tokio_zookeeper;

use tokio_zookeeper::*;
use tokio::prelude::*;

tokio::run(
    ZooKeeper::connect(&"127.0.0.1:2181".parse().unwrap())
        .and_then(|(zk, default_watcher)| {
            // let's first check if /example exists. the .watch() causes us to be notified
            // the next time the "exists" status of /example changes after the call.
            zk.watch()
                .exists("/example")
                .inspect(|(_, stat)| {
                    // initially, /example does not exist
                    assert_eq!(stat, &None)
                })
                .and_then(|(zk, _)| {
                    // so let's make it!
                    zk.create(
                        "/example",
                        &b"Hello world"[..],
                        Acl::open_unsafe(),
                        CreateMode::Persistent,
                    )
                })
                .inspect(|(_, ref path)| {
                    assert_eq!(path.as_ref().map(String::as_str), Ok("/example"))
                })
                .and_then(|(zk, _)| {
                    // does it exist now?
                    zk.watch().exists("/example")
                })
                .inspect(|(_, stat)| {
                    // looks like it!
                    // note that the creation above also triggered our "exists" watch!
                    assert_eq!(stat.unwrap().data_length as usize, b"Hello world".len())
                })
                .and_then(|(zk, _)| {
                    // did the data get set correctly?
                    zk.get_data("/example")
                })
                .inspect(|(_, res)| {
                    let data = b"Hello world";
                    let res = res.as_ref().unwrap();
                    assert_eq!(res.0, data);
                    assert_eq!(res.1.data_length as usize, data.len());
                })
                .and_then(|(zk, res)| {
                    // let's update the data.
                    zk.set_data("/example", Some(res.unwrap().1.version), &b"Bye world"[..])
                })
                .inspect(|(_, stat)| {
                    assert_eq!(stat.unwrap().data_length as usize, "Bye world".len());
                })
                .and_then(|(zk, _)| {
                    // create a child of /example
                    zk.create(
                        "/example/more",
                        &b"Hello more"[..],
                        Acl::open_unsafe(),
                        CreateMode::Persistent,
                    )
                })
                .inspect(|(_, ref path)| {
                    assert_eq!(path.as_ref().map(String::as_str), Ok("/example/more"))
                })
                .and_then(|(zk, _)| {
                    // it should be visible as a child of /example
                    zk.get_children("/example")
                })
                .inspect(|(_, children)| {
                    assert_eq!(children, &Some(vec!["more".to_string()]));
                })
                .and_then(|(zk, _)| {
                    // it is not legal to delete a node that has children directly
                    zk.delete("/example", None)
                })
                .inspect(|(_, res)| assert_eq!(res, &Err(error::Delete::NotEmpty)))
                .and_then(|(zk, _)| {
                    // instead we must delete the children first
                    zk.delete("/example/more", None)
                })
                .inspect(|(_, res)| assert_eq!(res, &Ok(())))
                .and_then(|(zk, _)| zk.delete("/example", None))
                .inspect(|(_, res)| assert_eq!(res, &Ok(())))
                .and_then(|(zk, _)| {
                    // no /example should no longer exist!
                    zk.exists("/example")
                })
                .inspect(|(_, stat)| assert_eq!(stat, &None))
                .and_then(move |(zk, _)| {
                    // now let's check that the .watch().exists we did in the very
                    // beginning actually triggered!
                    default_watcher
                        .into_future()
                        .map(move |x| (zk, x))
                        .map_err(|e| format_err!("stream error: {:?}", e.0))
                })
                .inspect(|(_, (event, _))| {
                    assert_eq!(
                        event,
                        &Some(WatchedEvent {
                            event_type: WatchedEventType::NodeCreated,
                            keeper_state: KeeperState::SyncConnected,
                            path: String::from("/example"),
                        })
                    );
                })
        })
        .map(|_| ())
        .map_err(|e| panic!("{:?}", e)),
);

Live-coding

The crate is under development as part of a live-coding stream series intended for users who are already somewhat familiar with Rust, and who want to see something larger and more involved be built. For futures-related stuff, I can also highly recommend @aturon's in-progress Async in Rust book.

You can find the recordings of past sessions in this YouTube playlist. This crate started out in this video, and got fleshed out more in this follow-up, before we mostly finished it in part 3. I recommend you also take a look at the ZooKeeper Programming Guide if you want to follow along. To get updates about future streams, follow me on Patreon or Twitter.

Thank you

For each of the projects I build, I like to thank the people who are willing and able to take the extra step of supporting me in making these videos on Patreon or Liberapay. You have my most sincere gratitude, and I'm so excited that you find what I do interesting enough that you're willing to give a stranger money to do something they love!

• Rodrigo Valin
• Pigeon F
• Patrick Allen
• Matthew Knight