Crates.io | kadcast |
lib.rs | kadcast |
version | 0.6.1 |
source | src |
created_at | 2021-11-02 17:16:03.564 |
updated_at | 2024-04-10 08:41:28.254971 |
description | Implementation of the Kadcast Network Protocol. |
homepage | |
repository | https://github.com/dusk-network/kadcast |
max_upload_size | |
id | 475805 |
size | 187,622 |
Implementation of the Kadcast Network layer according to the latest version of the paper to date (2021)
Kadcast is an UDP-based peer-to-peer protocol in which peers form a structured overlay.
💡 The specifications suggest that the protocol can be transport-agnostic, however this implementation uses the canonical choice of UDP.
All peers have an unique ID generated upon joining the network, which is used as an identifier unique to them.
💡 This implementation uses 128 bits identifiers generated from hashing the
<port>
|<ip_octects>
concatenation truncated to the agreed 16 bytes. The hashing algorithm used isBlake2
.
Following the Kademlia's specifications for a structured network, the ID determines the peer position in a binary routing tree.
Each peer mantains the routing state in a set of k-buckets
containing the location of the location of each peer. The location is fully determined by the tuple (ip_addr, port, ID)
.
Each bucket comprises of a list of the K
last recently seen peers, located at a given distance in relation to the peer. The distance is calculated as the non-euclidean XOR metric
which represents: d(x,y) = (x ^ y)
.
This implies that i
buckets contain K
Peers which distance d
follow the formula: 2^i <= d < 2^(i +1)
.
💡 The factor
K
is a system-wide parameter which determines the routing state and the lookup complexity.
In case a bucket's peer list is full (i.e. k
entries are already stored), new entries to that list may be inserted by dropping LRU
(Least Recently Used) peers.
Before dropping an entry from the list, the peer will check whether the peer to be dropped is still reachable, by sending a PING
message and waiting for a PONG
response. In case the PONG
won't be collected within pre-determined timeout, the check fails and the peer is dropped from the list.
💡 By following a
LRU
policy, the protocol inherently is biased toward the older and more stable peers on the network.
Upon joining the Kadcast network, a peer retrieves from the so-called bootstrap nodes
the locations of other neighbour peers, so to fill its buckets.
💡 From the specification: When a peer first joins the network, it has to know the address of at least one bootstrapping node. It therefore sends
PING
messages to known peers to check whether they are actually online. Additionally,PING
transmits the sending peer’s routing information to the recipient, thereby distributing its existence in the network.
The bootstrap node will reply with a PONG
message which also contains its node info.
Starts just after the bootstrapping process.
The main goal of this phase is to fill up the k-buckets
with k
different peers.
FIND_NODE
message to the bootstraping nodes that have been added to the k-bucket
s with the PONG
messages received.FIND_NODE
messages and wait for the NODES
reply.NODES
reply containing the set of k
peers they believe are the closest to ID
.⚠️ Note that like the bucket size,
𝛼
andk
are global constants that will determine the redundancy and overhead of the network. The typical values are:k = [20, 100]
&𝛼 = 3
.
Each peer periodically refreshes every bucket with no activity. For each such bucket, it picks a random ID
with appropriate distance, performs a look up, and populates its buckets with fresh routing information.
Instead of delegating the broadcast to one peer per bucket, we select β
delegates. This is done to increase the probability of at least one honest peer to receive the message broadcasted. This is a measure intended to help with the inherently lossy nature of the UDP protocol without forcing the use of slow CRC checking procedures.
Since each broadcast process is repeated on every hop (decreasing the height), it is imperative that the peers ignore duplicate CHUNK
messages. Moreover, transmission failures have to be considered. Because of these factors, this implementation includes the use of forward error connection schemes based on RaptorQ specifications and related rust library.
The FEC
overhead factor can be adjusted through the paramenter f = (n-s)/s
.
As shown in the benchmarks, we can get full network coverage even assuming a 12% packet-loss ratio with a β = 3
& f = 0,15
(Please refer to the benchmarks included with the library documentation).
The specification provides solutions for DOS, Sybil and Eclipse attacks, as well as obstruction of block delivery. All advices have been taken into consideration during the development.
For more information related to the internal architecture please check the architecture diagram.