lexgen: A fully-featured lexer generator, implemented as a proc macro

use lexgen::lexer;
use lexgen_util::Loc;

lexer! {
    // First line specifies name of the lexer and the token type returned by
    // semantic actions
    Lexer -> Token;

    // Regular expressions can be named with `let` syntax
    let init = ['a'-'z'];
    let subseq = $init | ['A'-'Z' '0'-'9' '-' '_'];

    // Rule sets have names. Each rule set is compiled to a separate DFA.
    // Switching between rule sets is done explicitly in semantic actions.
    rule Init {
        // Rules without a right-hand side for skipping whitespace,
        // comments, etc.
        [' ' '\t' '\n']+,

        // Rule for matching identifiers
        $init $subseq* => |lexer| {
            let token = Token::Id(lexer.match_().to_owned());
            lexer.return_(token)
        },
    }
}

// The token type
#[derive(Debug, PartialEq, Eq)]
enum Token {
    // An identifier
    Id(String),
}

// Generated lexers are initialized with a `&str` for the input
let mut lexer = Lexer::new(" abc123Q-t  z9_9");

// Lexers implement `Iterator<Item=Result<(Loc, T, Loc), LexerError>>`,
// where `T` is the token type specified in the lexer definition (`Token` in
// this case), and `Loc`s indicate line, column, and byte indices of
// beginning and end of the lexemes.
assert_eq!(
    lexer.next(),
    Some(Ok((
        Loc { line: 0, col: 1, byte_idx: 1 },
        Token::Id("abc123Q-t".to_owned()),
        Loc { line: 0, col: 10, byte_idx: 10 }
    )))
);
assert_eq!(
    lexer.next(),
    Some(Ok((
        Loc { line: 0, col: 12, byte_idx: 12 },
        Token::Id("z9_9".to_owned()),
        Loc { line: 0, col: 16, byte_idx: 16 }
    )))
);
assert_eq!(lexer.next(), None);

See also:

• Simple lexer definitions in tests
• A full Lua 5.1 lexer
• An example that uses lexgen with LALRPOP
• A lexer for a simpler version of OCaml
• A Rust lexer
• A parse event generator

Motivation

Implementing lexing is often (along with parsing) the most tedious part of implementing a language. Lexer generators make this much easier, but in Rust existing lexer generators miss essential features for practical use, and/or require a pre-processing step when building.

My goal with lexgen is to have a feature-complete and easy to use lexer generator.

Usage

lexgen doesn't require a build step. Add same versions of lexgen and lexgen_util as dependencies in your Cargo.toml.

Lexer syntax

lexgen lexers start with the name of the generated lexer struct, optional user state part, and the token type (type of values returned by semantic actions). Example:

lexer! {
    Lexer(LexerState) -> Token;
    ...
}

Here the generated lexer type will be named Lexer. User state type is LexerState (this type should be defined by the user). The token type is Token.

After the lexer name and user state and token types we define the rules:

rule Init {
    ...
}

rule SomeOtherRule {
    ...
}

The first rule set will be defining the initial state of the lexer and needs to be named Init.

In the body of a rule block we define the rules for that lexer state. The syntax for a rule is <regex> => <semantic action>,. Regex syntax is described below. A semantic action is any Rust code with the type fn(LexerHandle) -> LexerAction where LexerHandle and LexerAction are generated names derived from the lexer name (Lexer in our example). More on these types below.

Regular expressions can be named with let <name> = <regex>; syntax. Example:

let init = ['a'-'z'];
let subseq = $init | ['A'-'Z' '0'-'9' '-' '_'];

// Named regexes can be used with the `$` prefix
$init $subseq* => |lexer| { ... }

You can omit the rule Init { ... } part and have all of your rules at the top level if you don't need rule sets.

In summary:

• First line is in form <lexer name>(<user state type>) -> <token type name>. The (<user state type>) part can be omitted for stateless lexers.

• Next is the rule sets. There should be at least one rule set with the name Init, which is the name of the initial state.

• let bindings can be added at the top-level or in rules.

Regex syntax

Regex syntax can be used in right-hand side of let bindings and left-hand side of rules. The syntax is:

• $var for variables defined in the let binding section. Variables need to be defined before used.

• $$var for built-in regexes (see "Built-in regular expressions" section below).

• Rust character syntax for characters, e.g. 'a'.

• Rust string syntax for strings, e.g. "abc".

• [...] for character sets. Inside the brackets you can have one or more of:

  • Characters
  • Character ranges: e.g. 'a'-'z'

  Here's an example character set for ASCII alphanumerics: ['a'-'z' 'A'-'Z' '0'-'9']

• _ for matching any character

• $ for matching end-of-input

• <regex>* for zero or more repetitions of <regex>

• <regex>+ for one or more repetitions of <regex>

• <regex>? for zero or one repetitions of <regex>

• <regex> <regex> for concatenation

• <regex> | <regex> for alternation: match the first one, or the second one.

• <regex> # <regex> for difference: match characters in the first regex that are not in the second regex. Note that regexes on the left and right of # should be "characters sets", i.e. *, +, ?, "...", $, and concatenation are not allowed. Variables that are bound to character sets are allowed.

Binding powers (precedences), from higher to lower:

• *, +, ?
• #
• Concatenation
• |

You can use parenthesis for grouping, e.g. ('a' | 'b')*.

Example: 'a' 'b' | 'c'+ is the same as (('a' 'b') | ('c'+)).

Right context (lookahead)

A rule in a rule set can be followed by another regex using > <regex> syntax, for right context. Right context is basically a limited form of lookahead: they can only appear after a top-level regex for a rule. They cannot be used nested in a regex.

For example, the rule left-hand side 'a' > (_ # 'b') matches 'a' as long as it's not followed by 'b'.

See also right context tests for more examples.

Built-in regular expressions

lexgen comes with a set of built-in regular expressions. Regular expressions listed below match the same set of characters as their Rust counterparts. For example, $$alphabetic matches the same set of characters as Rust's char::is_alphabetic:

• $$alphabetic
• $$alphanumeric
• $$ascii
• $$ascii_alphabetic
• $$ascii_alphanumeric
• $$ascii_control
• $$ascii_digit
• $$ascii_graphic
• $$ascii_hexdigit
• $$ascii_lowercase
• $$ascii_punctuation
• $$ascii_uppercase
• $$ascii_whitespace
• $$control
• $$lowercase
• $$numeric
• $$uppercase
• $$whitespace

(Note that in the generated code we don't use Rust char methods. For simple cases like $$ascii we generate simple range checks. For more complicated cases like $$lowercase we generate a binary search table and run binary search when checking a character)

In addition, these two built-in regular expressions match Unicode XID_Start and XID_Continue:

• $$XID_Start
• $$XID_Continue

Rule syntax

• <regex> => <semantic action>,: <regex> syntax is as described above. <semantic action> is any Rust code with type fn(&mut Lexer) -> SemanticActionResult<Token>. More on SemanticActionResult type in the next section.

• <regex> =? <semantic action>,: fallible actions. This syntax is similar to the syntax above, except <semantic action> has type fn(&mut Lexer) -> LexerAction<Result<Token, UserError>>. When using rules of this kind, the error type needs to be declared at the beginning of the lexer with the type Error = UserError; syntax.

  When a rule of this kind returns an error, the error is returned to the caller of the lexer's next method.

• <regex>,: Syntactic sugar for <regex> => |lexer| { lexer.reset_match(); lexer.continue_() },. Useful for skipping characters (e.g. whitespace).

• <regex> = <token>,: Syntactic sugar for <regex> => |lexer| lexer.return_(<token>),. Useful for matching keywords, punctuation (operators) and delimiters (parens, brackets).

End-of-input handling in rule sets

The Init rule set terminates lexing successfully on end-of-input (i.e. lexer.next() returns None). Other rule sets fail on end-of-input (i.e. return Some(Err(...))). This is because generally the states other than the initial one are for complicated tokens (strings, raw strings, multi-line comments) that need to be terminated and handled, and end-of-input in those states usually means the token did not terminate properly.

(To handle end-of-input in a rule set you can use $ as described in section "Regex syntax" above.)

Handle, rule, error, and action types

The lexer macro generates a struct with the name specified by the user in the first line of the lexer definition. In the example at the beginning (Lexer -> Token;), name of the struct is Lexer.

A mut reference to this type is passed to semantic action functions. In the implementation of a semantic action, you should use one of the methods below drive the lexer and return tokens:

• fn match_(&self) -> &str: returns the current match. Note that when the lexer is constructed with new_from_iter or new_from_iter_with_state, this method panics. It should only be called when the lexer is initialized with new or new_with_state.
• fn match_loc(&self) -> (lexgen_util::Loc, lexgen_util::Loc): returns the bounds of the current match
• fn peek(&mut self) -> Option<char>: looks ahead one character
• fn state(&mut self) -> &mut <user state type>: returns a mutable reference to the user state
• fn return_(&self, token: <user token type>) -> SemanticActionResult: returns the passed token as a match.
• fn continue_(&self) -> SemanticActionResult: ignores the current match and continues lexing in the same lexer state. Useful for skipping characters.
• fn switch(&mut self, rule: LexerRule) -> SemanticActionResult: used for switching between lexer states. The LexerRule (where Lexer part is the name of the lexer as specified by the user) is an enum with a variant for each rule set name, for example, LexerRule::Init. See the stateful lexer example below.
• fn switch_and_return(&mut self, rule: LexerRule, token: <user token type>) -> SemanticActionResult: switches to the given lexer state and returns the given token.
• fn reset_match(&mut self): resets the current match. E.g. if you call match_() right after reset_match() it will return an empty string.

Semantic action functions should return a SemanticActionResult value obtained from one of the methods listed above.

Initializing lexers

lexgen generates 4 constructors:

• fn new(input: &str) -> Self: Used when the lexer does not have user state, or user state implements Default.

• fn new_with_state(input: &str, user_state: S) -> Self: Used when the lexer has user state that does not implement Default, or you want to initialize the state with something other than the default. S is the user state type specified in lexer definition. See stateful lexer example below.

• fn new_from_iter<I: Iterator<Item = char> + Clone>(iter: I) -> Self: Used when the input isn't a flat string, but something like a rope or zipper. Note that the match_ method panics when this constructor is used. Instead use match_loc to get the location of the current match.

• fn new_from_iter_with_state<I: Iterator<Item = char> + Clone, S>(iter: I, user_state: S) -> Self: Same as above, but doesn't require user state to implement Default.

Stateful lexer example

Here's an example lexer that counts number of =s appear between two [s:

lexer! {
    // `usize` in parenthesis is the user state type, `usize` after the arrow
    // is the token type
    Lexer(usize) -> usize;

    rule Init {
        $$ascii_whitespace,                             // line 7

        '[' => |lexer| {
            *lexer.state() = 0;                         // line 10
            lexer.switch(LexerRule::Count)              // line 11
        },
    }

    rule Count {
        '=' => |lexer| {
            *lexer.state() += 1;                        // line 17
            lexer.continue_()                           // line 18
        },

        '[' => |lexer| {
            let n = *lexer.state();
            lexer.switch_and_return(LexerRule::Init, n) // line 23
        },
    }
}

let mut lexer = Lexer::new("[[ [=[ [==[");
assert_eq!(
    lexer.next(),
    Some(Ok((
        Loc { line: 0, col: 0, byte_idx: 0 },
        0,
        Loc { line: 0, col: 2, byte_idx: 2 },
    )))
);
assert_eq!(
    lexer.next(),
    Some(Ok((
        Loc { line: 0, col: 3, byte_idx: 3 },
        1,
        Loc { line: 0, col: 6, byte_idx: 6 },
    )))
);
assert_eq!(
    lexer.next(),
    Some(Ok((
        Loc { line: 0, col: 7, byte_idx: 7 },
        2,
        Loc { line: 0, col: 11, byte_idx: 11 },
    )))
);
assert_eq!(lexer.next(), None);

Initially (the Init rule set) we skip spaces (line 7). When we see a [ we initialize the user state (line 10) and switch to the Count state (line 11). In Count, each = increments the user state by one (line 17) and skips the match (line 18). A [ in Count state returns the current number and switches to the Init state (line 23).