SH1106 driver

I2C and SPI driver for the SH11xx and SSD1xxx OLED displays written in 100% Rust

Documentation

[Examples]

This crate uses probe-run to run the examples. Once set up, it should be as simple as cargo run --example image --features=embassy-stm32 --features=spi --release. --release will be required for some examples to reduce FLASH usage.

From examples/text.rs:

#![no_std]
#![no_main]

mod bsp;

use embassy_executor::Spawner;
use embedded_graphics::{
    mono_font::{ascii::FONT_6X10, MonoTextStyleBuilder},
    pixelcolor::BinaryColor,
    prelude::*,
    text::{Baseline, Text},
};
use embedded_hal_async::delay::DelayNs;

use oled_async::{prelude::*, Builder};
use {defmt_rtt as _, panic_probe as _};

#[embassy_executor::main]
async fn main(_spawner: Spawner) {
    let (di, mut reset, mut delay) = bsp::board::get_board();

    type Display = oled_async::displays::sh1107::Sh1107_128_128;
    //type Display = oled_async::displays::sh1108::Sh1108_64_160;
    //type Display = oled_async::displays::ssd1309::Ssd1309_128_64;

    let raw_disp = Builder::new(Display {})
        .with_rotation(crate::DisplayRotation::Rotate180)
        .connect(di);

    let mut display: GraphicsMode<_, _, { 128 * 128 / 8 }> = raw_disp.into();

    display.reset(&mut reset, &mut delay).unwrap();
    display.init().await.unwrap();
    display.clear();
    display.flush().await.unwrap();

    let text_style = MonoTextStyleBuilder::new()
        .font(&FONT_6X10)
        .text_color(BinaryColor::On)
        .build();

    Text::with_baseline("Hello world!", Point::zero(), text_style, Baseline::Top)
        .draw(&mut display)
        .unwrap();

    Text::with_baseline("Hello Rust!", Point::new(0, 16), text_style, Baseline::Top)
        .draw(&mut display)
        .unwrap();

    display.flush().await.unwrap();

    loop {
        delay.delay_ms(1000).await;
    }
}

License

Licensed under either of

• Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
• MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)

at your option.

Contribution

Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.