Rust Sensor SCD30

A rust driver (and CLI utility) for the scd30 CO2, Temperature and Humidity sensor.

Status

Open Issues

Usage

Add the library to your project with cargo add sensor-scd30 or with sensor-scd30 = { version = "0.1.0", features = [] } in your Cargo.toml.

Install the utility with one of the following methods:

• using a precompiled binary from the releases page
• from source using cargo with cargo install sensor-scd30

Run scd30-util to communicate with the sensor.

Help:

pi@raspberrypi:~ $ sudo ./scd30-util --help
scd30-util 0.1.0
Ryan Kurte <ryankurte@gmail.com>
A Command Line Interface (CLI) for interacting with a local Scd30 environmental sensor over I2C

USAGE:
    scd30-util [OPTIONS]

FLAGS:
    -h, --help       Prints help information
    -V, --version    Prints version information

OPTIONS:
    -d, --i2c <i2c>                  Specify the i2c interface to use to connect to the scd30 device [env: SCD30_I2C=]
                                     [default: /dev/i2c-1]
        --log-level <level>          Enable verbose logging [default: info]
    -p, --sample-period <period>     Specify period for taking measurements [default: 10s]
        --poll-delay <poll_delay>    Delay between sensor poll operations [default: 100ms]

Example output:

pi@raspberrypi:~ $ ./scd30-util -p 2s
04:01:00 [INFO] CO2: 556.21 ppm, Temperature: 19.15 C, Humidity: 49.39 %
04:01:02 [INFO] CO2: 553.72 ppm, Temperature: 19.13 C, Humidity: 49.44 %