Framework LED Matrix Board

Preamble

THIS IS UNOFFICIAL SOFTWARE. I AM NOT AFFILIATED WITH FRAMEWORK

This repository contains a language agnostic server for the Framework LED Matrix which can display and modify one 9x1 'status bar' and three 9x11 'applets'.

This repository requires the FW_LED_Matrix_Firmware and FW_LED_Matrix_Interface repositories.

This repository is designed to be run initially and then communicated with through the FW_LED_Matrix_Applet library.

Capabilities

This repository contains a server that holds four total applets. Applet 0 is located across the top of the LED matrix and only accepts modifications to its separator bar. Applets 1-3 are located in order from top to bottom of the LED matrix. Applets 1-3 each have an optionally variable separator bar at its top and a modifiable grid at its bottom. Each separator bar is 9 LEDs wide and 1 LED high. Each grid is 9 LEDs wide and 10 LEDs high.

The server can update each applet at roughly 80 frames per second.

Associated Software

FW_LED_Matrix_Firmware is Arduino-based firmware and is a prerequisite installation for this library.

FW_LED_Matrix_Interface is a Rust library for interfacing between this firmware and other Rust programs.

FW_LED_Matrix_Applet is a Rust Library for interfacing between Rust programs and FW_LED_Matrix_Board.

Communication

Communication is over TCP

Commands are received with JSON encoded 'Command' structres in the format: { "opcode": "", "app_num": <Applet Number (0-2)>, "parameters": [x<,y<,...z> (where each value is a u8)] }

Commands:

CreateApplet - Creates a new applet assigned to the requesting TCP stream

Parameters: 1 u8 from 0-3 0 - Applet separator is empty (all LED's off)

1 - Applet separator is solid (all LED's on)

2 - Applet separator is dotted (alternating LED's on & off)

3 - Applet seprator is variable (default off)

UpdateGrid - Rewrites the current 9x10 applet grid with new values

Parameters: 90 u8 representing grid brightnesses - rows then columns (1st 10 is row1, 2nd 10 is row2, etc.)

UpdateBar - Rewrites the current 9x1 applet separator

Parameters: 9 u8 representing separator brightnesses

Note: Error 32 returned if bar is not variable

sig_rp2040_board will respond with a single u8 error code (not JSON):

0: Command successfully processed

10: Failed to read data from stream

20: Failed to parse stream data as UTF-8

21: Failed to parse stream data as JSON

30: Command uses invalid applet number (greater than 2)

31: Command attempts to modify applet stream did not create

32: Attempt to update applet 0 grid

33: Error in commanding applet

34: Attempt to create new applet when applet already exists

40: Invalid separator value when creating applet

255: Unknown error