This crate provides Rust's quasi-quoting macro, intended to use in your proc-macro, to generate TokenStream expanding variable interporation and expanding templates.

This macro is constructed based on proc_macro crate.

Interporation

Original quote! macro syntax is fully supported. See quote's doc.

For backward compatibility, interporation rule is same as traditional quote! macro. The interporation is done with #var (similar to the variable $var in macro_rules!). Most variables in Syn crate are interporated using [::proc_quote::ToTokens] trait.

Rules

Repetition is done using syntax like #(...)* or #(...),*. It repeats the variables (#var) inside this syntax, which implements [::proc_quote::Repeat].

• #(...)* - repeat ... with no separators. at least one variable should be included in ...
• #(...),* - same as before, but interporates with separator ','.

Problem

The interporation rule is rough, so I implemented new 'template' syntax. For example, the following code will not allowed, because #var1 cannot be iterated double.

# use template_quote::quote;
let var1 = vec!['a', 'b'];
let var2 = vec![vec![1, 2], vec![3, 4]];
let tokens = quote!{
	#(#(#var1 #var2)*)*
};
assert_eq!("'a' 1i32 'a' 2i32 'b' 3i32 'b' 4i32", tokens.to_string());

Template syntax

Template syntax is proceedual-like syntax, which allows you to use structual statementsinside the macro.

If syntax

This code iterates around #i (with interporation), and emits i32 into TokenStream while the number meets the condition.

# use template_quote::quote;
let i = vec![1, 2, 3];
let tokens = quote!{
	#(
		#(if i > &2) {
			#i
		}
	)*
};
assert_eq!("3i32", tokens.to_string());

The if-else and if-else-if is also allowed.

# use template_quote::quote;
let i = vec![1, 2, 3];
let tokens = quote!{
	#(
		#(if i > &2) {
			+ #i
		}
		#(else) {
			- #i
		}
	)*
};
assert_eq!("- 1i32 - 2i32 + 3i32", tokens.to_string());

# use template_quote::quote;
let i = vec![1, 2, 3, 4, 5];
let tokens = quote!{
	#(
		#(if i % &2 == 0) {
			+ #i
		}
		#(else if i % &3 == 0) {
			- #i
		}
		#(else) {
			#i
		}
	)*
};
assert_eq!("1i32 + 2i32 - 3i32 + 4i32 5i32", tokens.to_string());

For syntax

For syntax iterates around the variable (like interporation), but it specifies which variable to iterate.

# use template_quote::quote;
let v1 = vec![1, 2];
let v2 = vec!['a', 'b'];
let tokens = quote!{
	#(for i1 in &v1) {
		#(for i2 in &v2) {
			#i1 -> #i2
		}
	}
};
assert_eq!("1i32 -> 'a' 1i32 -> 'b' 2i32 -> 'a' 2i32 -> 'b'", tokens.to_string());

Internal loop can be replaced with interporation:

# use template_quote::quote;
let v1 = vec![1, 2];
let v2 = vec!['a', 'b'];
let tokens = quote!{
	#(for i1 in &v1) {
		#(
			#i1 -> #v2
		)*
	}
};
assert_eq!("1i32 -> 'a' 1i32 -> 'b' 2i32 -> 'a' 2i32 -> 'b'", tokens.to_string());

You can also specify separator with for statement.

# use template_quote::quote;
let v = vec![1, 2];
let tokens = quote!{
	#(for i in v) | { #i }
};
assert_eq!("1i32 | 2i32", tokens.to_string());

Interporation is not usable with variables binded in for syntax. For example,

# use template_quote::quote;
let v = vec![vec![1, 2], vec![3]];
let tokens = quote!{
	#(
		#(for i in v) { #i }
	),*
};
assert_eq!("1i32 2i32 , 3i32", tokens.to_string());

will fail into error because no variables is available in the interporation syntax.

error: proc macro panicked
  --> ***
   |
6  |   let tokens = quote!{
   |  ______________^
7  | |     #(
8  | |         #(for i in v) { #i }
9  | |     )*
10 | | };
   | |_^
   |
   = help: message: Iterative vals not found

In this case, you can use #(for i in #v) syntax to specify which variable to iterate with interporation:

# use template_quote::quote;
let v = vec![vec![1, 2], vec![3]];
let tokens = quote!{
	#(
		#(for i in #v) { #i }
	),*
};
assert_eq!("1i32 2i32 , 3i32", tokens.to_string());

While syntax

# use template_quote::quote;
let mut v = vec![1, 2].into_iter();
let tokens = quote!{
	#(while v.next().is_some()) { hello }
};
assert_eq!("hello hello", tokens.to_string());

While-Let syntax

# use template_quote::quote;
let mut v = vec![1, 2].into_iter();
let tokens = quote!{
	#(while let Some(i) = v.next()) { #i }
};
assert_eq!("1i32 2i32", tokens.to_string());

Same as 'for' syntax, the binded valiables in 'while' is not iteratable with interporation syntax. For example,

# use template_quote::quote;
let mut v = vec![1, 2].into_iter();
quote!{
	#(
		#(while let Some(i) = v.next()) { #i }
	)*
};

will fail.

Let syntax

Let syntax bind new variables usable inside the block.

# use template_quote::quote;
let v = vec![(1, 'a'), (2, 'b')];
let tokens = quote!{
	#(for i in v), {
		#(let (n, c) = i) {
			#n -> #c
		}
	}
};
assert_eq!("1i32 -> 'a' , 2i32 -> 'b'", tokens.to_string());

Here, #n and #c is not iteratable with interporation syntax.

Inline expression

You can place inline expression in quote! macro.

# use template_quote::quote;
let v = vec![1, 2];
let tokens = quote!{
	#(for i in v){
		#i -> #{ i.to_string() }
	}
};
assert_eq!("1i32 -> \"1\" 2i32 -> \"2\"", tokens.to_string());

The following example will fail to compile because it does not understand which variable to be interpolated:

# use template_quote::quote;
let v = vec![1, 2];
let tokens = quote!{
	#(
		#{ v.to_string() }
	)*
};
assert_eq!("\"1\" \"2\"", tokens.to_string());

In this case, you can use #i syntax in inline expression to specify which variable to iterate with interporation syntax.

# use template_quote::quote;
let v = vec![1, 2];
let tokens = quote!{
	#(
		#{ #v.to_string() }
	)*
};
assert_eq!("\"1\" \"2\"", tokens.to_string());

Inline statement

You can place arbitrary statement inside this macro. For example,

# use template_quote::quote;
let v = vec![1, 2, 3];
let tokens = quote!{
	#(
		#v
		#{ eprintln!("debug: {}", &v); }
	)*
};
assert_eq!("1i32 2i32 3i32", tokens.to_string());

will print:

debug: 1
debug: 2
debug: 3

To be distinguishable, all statements have to end with ';'. For example, 'if' statement in inline statement syntax should placed with extra ';'.

# use template_quote::quote;
let v = vec![1, 2, 3];
quote!{
	#(
		#v
		#{ if v >= &2 { eprintln!("debug: {}", &v); } ; }
	)*
};

Break, Continue

You can put control statement like break or continue in inline statement, but it is a bit danger.

If you use break; inside block (like { ... } or ( ... )), break will suddenly give up emitting whole group, and nothing will be emitted. For example, the following code does not emit any group:

# use template_quote::quote;
let v = vec![1, 2, 3];
let tokens = quote!{
	#(for i in v) {
		#i // this is emitted once
		// The block is not emitted
		{
			#i
			#{ break; }
		}
	}
};
assert_eq!("1i32", tokens.to_string());

break also affects on interporation syntax like:

# use template_quote::quote;
let v = vec![1, 2, 3];
let tokens = quote!{
	#(
		#v
		#{ break; }
	),*
};
assert_eq!("1i32", tokens.to_string());

Unfortunately, break will leak outside of quote! macro. This is example which the internal break affects on 'for' loop, which is placed outer of the quote! macro.

# use template_quote::quote;
let mut v = Vec::new();
for _ in 0..3 {
	let tokens = quote!{
		#{ break; }
	};
	v.push(tokens);
}
assert_eq!(v.len(), 0);

This crate provides quasi-quoting macros like quote. This crate has backward-compatibility with original quote! macro and also provides new template-engine like syntax.

This crate is get some inspiration from proc-quote.

Using this crate

This crate is useful for developing proc-macro. Usually an proc-macro crate using template_quote is placed with following Cargo.toml:

[package]
name = "your_crate_name"
version = "0.0.0"
edition = "2021"

[lib]
proc-macro = true

[dependencies]
template-quote = "0.2"
proc-macro2 = "1.0"

and with following src/lib.rs code:

extern crate proc_macro;
extern crate proc_macro2;
extern crate template_quote;

use template_quote::quote;
use proc_macro::TokenStream;
use proc_macro2::TokenStream as TokenStream2;

#[proc_macro]
pub fn my_macro(_: TokenStream) -> TokenStream {
	quote! { /* something here */ }.into()
}

then you will be able to use it like:

extern crate your_crate_name;
use your_crate_name::my_macro;

my_macro!()

Limitation

• If the punct token before '#' in the macro body has Spacing::Join, then the emitting punct also has same spacing, whether the '#' token is processed by the macro or not.